Webercol

HomeWebercol
  • Glue mortar suitable for laying thick and medium / high porosity tiles and stoneware, both on floors and on interior cladding. Without plastering the support, without hanging and up to 30mm thick. Presentation: 25 Kg bags. Colors: Gray and White. Applications: - Interior coatings. - Indoor flooring. Supports: - Cement-based floors. · Walls plastered with sand mortar, cement and ceramic brick. Technical Sheet: https://www.es.weber/files/es/2018-07/FTC-ES-P-webercol-capa-gruesa.pdf.pdf
  • High performance adhesive with mixed cement and resin binders, long open time and slip resistant, suitable for laying ceramic, marble, mosaics, glass paste, etc., on exterior and interior flooring and interior cladding. Suitable for placement in pools. Presentation: 25 Kg bags. Colors: Gray and White. Technical Sheet: https://www.es.weber/files/es/2018-11/FTC-ES-P-webercol-dur.pdf Applications: Interior cladding and interior and exterior paving, both in residential areas (kitchens, dining rooms, bathrooms) and urban areas. - Suitable for terraces, balconies and outdoor pavements in general subject to permanent humidity and frost. - Suitable for permanent immersion and wet environments such as swimming pools, baths, shower trays, saunas, spas, tanks, cold rooms, etc. Supports: - Cement-based screeds and self-leveling mortars. - Walls plastered with cement mortar and bastard mortar. - Laminated gypsum boards (gypsum board) waterproofed and non-waterproofed. Indoor fiber cement plates. -Rigid cementitious waterproofing (type weber.tec imper F or weber.tec imper G) and flexible (type weber.tec imperflex).
  • Adhesive paste based on polyurethane-epoxy with high flexibility and adherence for laying all kinds of ceramic tiles of any format and absorption on interior and exterior walls and floors. Especially indicated for supports subjected to strong vibrations or deformations such as woods, metals and synthetic materials such as vinyl, among others. Presentation: 10 Kg predosed bucket (Component A and B). Colors: White. Applications: - Interior cladding and interior and exterior paving in residential, commercial, industrial and urban areas. - Indoor flooring and cladding in residential areas such as kitchens, dining rooms, bathrooms. - Suitable for terraces, balconies and outdoor pavements in general subjected to humidity and permanent frost. - Cladding on facades. - Laying ceramic on elastic waterproofing (webertec hydrolastic type). - Placements on metal supports. - Placing synthetic materials not compatible with cementitious mortars. - Suitable for humid environments such as bathrooms, shower trays, saunas, spas, tanks, cold rooms, etc. - Industrial and commercial floors of high demand subjected to intense traffic and / or constant vibrations. Supports: - Cement-based screeds and self-leveling mortars. - Walls plastered with cement mortar and bastard mortar. - Concrete, precast concrete and foam concrete. - Fiber cement plates. - Pre-existing floor and wall tiles made of ceramic, terrazzo, natural stone, etc. - Plaster plasters, precast plasterboard and / or plaster. - Laminated plasterboard (plasterboard) waterproofed and non-waterproofed. - Anhydrite screeds. - Rigid cementitious waterproofing and on elastic waterproofing - Polyurethane or epoxy flooring. -Supports subject to movements or vibrations such as wood, parquet floors, chipboard panels. - Old PVC, linoleum and rigid vinyl flooring. - Polyester, metal and paint supports in good condition. Technical Sheet: Download
  • Adhesive paste for laying ceramic tiles on interior walls, especially on deformable supports such as plasterboard and on old tiling. Presentation: 25 Kg bucket. Colors: Off white. Applications: - Ceramic coatings on interior walls, especially on deformable supports and old tiling. Supports: - Old tiling. - Deformable supports (plasterboard). - Plaster plasters. - Painted surfaces. Technical Sheet: Download
  • Flexible adhesive with mixed cement and resin binders, long open time and slip resistant, for laying all kinds of ceramic tiles and especially porcelain stoneware, of any format and absorption. Placements on interior and exterior walls and pavements. Presentation: 25 Kg bags. Colors: Gray and White. Applications: 1. Placement of pieces of any format and absorption (not susceptible to stains by water absorption), especially porcelain stoneware. 2. In exterior and interior pavements and interior cladding. 3. Placement of porcelain stoneware in swimming pools, on plaster supports and in situations with high demands on use. Supports: 1. Concrete and cement-based floors. 2. Walls: glued with cementitious mortar, concrete, plaster, precast plasterboard and plasterboard. Technical Sheet: Download
  • Thixotropic adhesive reinforced with glass fibers and mixed cement and resin binders, flexible, with long open time and no slip, for laying all kinds of ceramic tiles and especially porcelain stoneware, of any format and absorption. Placements on walls, interior and exterior pavements. Presentation: 25 Kg bags. Colors: Gray and White. Applications: 1. Placement of pieces of any format and especially absorption of porcelain stoneware. 2. In exterior and interior pavements and interior cladding. 3. For Pools (suitable in immersion). 4. Façade cladding up to 3M high. 5. Radiant heating with small format pieces. Supports: 1. Concrete and cement-based floors. 2. Walls: glued with cementitious mortar, concrete, plaster, precast plasterboard and plasterboard. Technical Sheet: Download
  • Rapid-setting mixed-bond glue mortar, which enables the quick installation of the installed ceramic. Thanks to its innovative technology, it allows rapid setting even at low temperatures. Laying on interior floors and walls and exterior floors with ceramic, porcelain stoneware, marble, natural stone or similar, of any format, absorbent or non-absorbent. Presentation: 25 Kg bags. Colors: Gray and White. Applications: - Heavy traffic pavements and large surfaces where rapid commissioning is required. - Placing ceramic directly on old ceramic. - Laying ceramic on balconies and terraces. - Suitable in immersion. Supports: Cement-based screeds and self-leveling mortars. - Walls plastered with cement mortar and bastard mortar. - Concrete. -Ancient pottery. Technical Sheet: Download
  • Flexible and deformable adhesive with mixed cement and resin binders, long open time and slip resistant, for laying all kinds of ceramic tiles, of any format and absorption. Placements on interior and exterior walls and pavements. Presentation: 25 Kg bags. Colors: Gray and White. Applications: - High-rise façade cladding and intense traffic paving (not susceptible to stains due to water absorption). - For pieces of any format and absorption. - Demanding placements in interior and exterior flooring and cladding. Radiant heating floors. -Suitable for swimming pools (suitable for immense). Supports: Cementitious mortar, concrete, old ceramics, plaster, precast plaster, plasterboard and ahnidrite slabs. Technical Sheet: TO DOWNLOAD
  • Thixotropic adhesive reinforced with glass fibers and mixed cement and resin binders, flexible and deformable, with long open time and no slip, for laying all kinds of ceramic tiles of any absorption. Placements on interior and exterior walls and pavements. Presentation: 25 Kg bags. Colors: Gray and White. Applications: - Suitable for laying all kinds of ceramic tiles of any degree of absorption such as porcelain stoneware, rustic stoneware, glass and ceramic mosaic, fired clay tiles, Catalan tile, tile, etc. - Suitable for laying natural stone (marble, granite, etc.) and artificial recomposed materials (terrazzo-type cement conglomerate). - Suitable for laying artificial recomposed materials (resin-based agglomerates) that are not subject to deformation. - Suitable for pieces reinforced with fiber mesh in pavement and interior wall of up to 70cm in length from the longest side of the tile. Supports: - Self-leveling screeds and mortars on a cement basis. - Walls plastered with cement mortar and bastard mortar. - Concrete, precast concrete and foam concrete. - Lime, plaster, precast plaster and/or plaster panels. - Laminated gypsum boards (gypsum board) waterproofed and non-waterproofed. - Fiber cement plates. -Large format ceramic brick. - Pre-existing pavements and coatings of ceramic, terrazzo, mosaics, natural stone, etc. - Anhydrite screeds (with or without underfloor heating), after treating the substrate with weberprim TP05, diluted 1: 5. - Radiant heating floors (cement-based or anhydrite). Rigid cementitious waterproofing (type webertec imper F or webertec imper G) and flexible (type webertec imperflex). - Wooden supports after application of weberprim FX15 express. -Elastic waterproofing (webertec hydrolastic type) with pieces of format up to 30x30cm. Technical Sheet: TO DOWNLOAD
  • Rapid setting, extended open time and low take-off mixed mortar glue mortar that allows quick commissioning of the installed ceramic. Laying of facades and flooring for large surfaces, etc., with ceramic, marble, natural stone or the like, small or large, absorbent or non-absorbent. Outdoors and indoors. Presentation: 25 Kg bags. Colors: Gray and White. Applications: Heavy traffic pavements and large surfaces where rapid commissioning is required. - Laying ceramic directly on old ceramic. - Laying of radiant heating floors. - Laying ceramic on balconies and terraces. - Ceramic placement in anhydrite screeds, after application of weberprim TP05, diluted 1: 5. - Suitable in immersion. Supports: - Cement-based screeds and self-leveling mortars. - Walls plastered with cement mortar and bastard mortar. - Concrete. -Radiant heating floors. -Ancient pottery. Technical Sheet:  TO DOWNLOAD
  • One-component, fast-setting and highly deformable adhesive (C2FTES2) formulated with mixed cement-resin binders that allows the quick commissioning of the installed ceramic. Suitable for laying all kinds of ceramic tiles, marble, natural stone or the like of any absorption and format, and especially large format. Suitable for deformable supports or subject to movement or vibrations (wood, elastic waterproofing type webertec hydrolastic). Placements in interior and exterior pavements and coatings. Suitable for facades. Presentation: 25 Kg bags. Colors: Gray. Applications: • Interior and exterior coatings and pavements in residential, commercial, industrial and urban areas. • Indoor flooring and cladding in residential areas such as kitchens, dining rooms, bathrooms, ... • Indoor ceramic laying directly on pre-existing ceramic flooring or cladding in residential, commercial and industrial areas • Heavy traffic pavements and large surfaces where rapid commissioning is required. • Laying of radiant heating floors with pieces of any format and absorption, especially suitable for large formats. • Ceramic tiles placed on anhydrite screeds, after applying weberprim TP05, diluted 1: 5. • Industrial and commercial pavements subjected to intense traffic. • Ceramic installation on interior wooden walls and floors after application of weberprim FX15. • Suitable for terraces, balconies and outdoor pavements in general subject to permanent humidity and frost. • Suitable for permanent immersion and humid environments such as swimming pools, baths, shower trays, saunas, spas, tanks, cold rooms, etc. • Cladding on facades. • Laying of ceramic on elastic waterproofing (webertec hydrolastic type) with pieces of format up to 2,400 cm. Supports: • Cement-based screeds and self-leveling mortars. • Walls plastered with cement mortar and bastard mortar. • Concrete, precast concrete and foam concrete. • Plaster plasters, precast plaster and/or plaster panels. • Laminated plasterboard (plasterboard) waterproofed and non-waterproofed. • Fiber cement plates. • Pre-existing floor and wall tiles made of ceramic, terrazzo, natural stone, etc. • Anhydrite screeds • Radiant heating floors (cement-based or anhydrite). • Rigid cementitious waterproofing (type webertec imper F or webertec imper G) and flexible (type webertec imperflex). • Elastic waterproofing (webertec hydrolastic type). • Rigid cementitious waterproofing (type webertec imper F or webertec imper G) and flexible (type webertec imperflex). • Elastic waterproofing (webertec hydrolastic type). • Wooden supports after application of weberprim FX15 express. • Elastic waterproofing (webertec hydrolastic type) with pieces of format up to 2,400 cm. Technical Sheet: TO DOWNLOAD
  • Thixotropic adhesive reinforced with glass fibers and mixed cement and resin binders, flexible and highly defomable, with long open time and no slippage, for laying all kinds of ceramic tiles, of any absorption and especially of large format. Suitable for highly deformable supports (wood, elastic waterproofing type webertec hydrolastic). Placements on interior and exterior walls and pavements. Presentation: 25 Kg bags. Colors: White. Applications: - Interior cladding and interior and exterior paving in residential, commercial, industrial and urban areas. - Indoor flooring and cladding in residential areas such as kitchens, dining rooms, bathrooms, ... - Suitable for terraces, balconies and outdoor pavements in general subject to permanent humidity and frost. - Suitable for permanent immersion and wet environments such as swimming pools, baths, shower trays, saunas, spas, tanks, cold rooms, etc. - Industrial and commercial pavements subjected to intense traffic. - Laying ceramic directly on pre-existing ceramic coatings and pavements in residential, commercial and industrial areas. - Ceramic installation on interior wooden walls and floors after application of weberprim FX15 express. - Radiant heating floors with pieces of any format and absorption, especially suitable for large formats. - Cladding on facades at height, especially with a large format. Supports: - Self-leveling screeds and mortars on a cement basis. - Walls plastered with cement mortar and bastard mortar. - Concrete, precast concrete and foam concrete. - Plaster plasters, precast plaster and/or plaster panels. - Laminated gypsum boards (gypsum board) waterproofed and non-waterproofed. - Fiber cement plates. -Large format ceramic brick. - Pre-existing pavements and coatings of ceramic, terrazzo, mosaics, natural stone, etc. - Anhydrite screeds (with or without radiant heating), after treating the - substrate with weberprim TP05, diluted 1: 5. - Radiant heating floors (cement-based or anhydrite). - Rigid cementitious waterproofing (type webertec imper F or webertec imper G) and flexible (type webertec imperflex). -Elastic waterproofing (webertec hydrolastic type). -Wooden supports after application of weberprim FX15 express. - Elastic waterproofing (webertec hydrolastic type) with pieces of format up to 2,400 cm. Technical Sheet: TO DOWNLOAD

Title

ADC Del Caribe

ACD Del Caribe is a specialized distributor of systems, products and additives for the construction sector. We seek to be the perfect synergy between world leading manufacturers and our clients' projects throughout the Caribbean region.

CONTACTS

Go to Top