- High mechanical resistance
- Excellent dimensional stability
- Great deformability
- Excellent tensile and elongation resistance
- Anti-alkali treatment
- Quick and easy installation
- Substrates: Lime mortar, Cement mortar
-
Fiberglass mesh with antialkaline surface treatment for reinforcing thin-film coatings in webertherm exterior thermal insulation systems, with a density of 155 gr / m2 and a mesh opening of 3.5 x 3.8 mm. Presentation: 55 m2 rolls. Webertherm 160 mesh is a fiberglass mesh combined with specially designed anti-alkali surface treatments, and usable in a wide range of applications. Weber.therm base regularizing mortar reinforcement in weber.therm insulation systems. -
Supports: Any mortar from the weberpral, webercal or weberev range. o Webertherm base and webertherm base plus high performance mortar. o Concrete, lightened concrete or aerated concrete. o Paints and synthetic coatings o Plaster Technical Data: Download -
Applications: • Highly decorative ready-to-use thin-layer acrylic coating, with a circular or linear floated finish, is suitable for exterior and interior, and for walls and ceilings. They are part of the exclusive webertherm insulation and weberenova renovation systems. • Formula specially developed to obtain extra protection against the proliferation of microorganisms. • For other applications, consult our Technical Department. • Available in 2 granulometries: L: max 1.5 mm XL: max 2.5 mm Technical Data: Download -
Ready-to-use colored siloxane-based mortar (0.5 mm) Ready-to-use thin-film siloxane coating. Advance technology provides an unbeatable degree of waterproofing and color stability. It has a maximum grain size of 0.5 mm. With a manual or machine-projected floated finish, it is suitable for exteriors and interiors and for walls and ceilings. They are part of the exclusive webertherm insulation and weberenova renovation systems. Presentation: 25 Kg plastic drum. Colors: Color gamut product Data sheet: TO DOWNLOAD App: • Apply with the help of a metal trowel or webertene advance XS spray gun. The ready-to-use mortar is applied completely covering the surface with a thickness of approximately 0.8 mm. • In the event that decorative cuts are made, these will be done with adhesive tape that must be removed before the product hardens. The protection of these discontinuities in the webertene advance XS mortar must be carried out with the webertene advance PLUS siloxane paint of the chosen color before applying this last layer. The use of this very high-performance paint strengthens the protection of the facade at these points. Medium: Concrete, Cement mortar, Lime mortar, Paints, Plaster, Wood, Concrete block. -
Ready-to-use thin-film siloxane coating. Advance technology provides an unbeatable degree of waterproofing and color stability. It has a maximum grain size of 0.8 mm. With a manual or machine-projected float finish, it is suitable for exterior and interior and for walls and ceilings. They are part of the exclusive webertherm insulation and weberenova renovation systems. Presentation: 25 Kg plastic drum. Colors: Color gamut product Data sheet: TO DOWNLOAD -
Ready-to-use colored siloxane-based mortar (1.2 mm) Ready-to-use thin-film siloxane coating. Advance technology provides a degree of impermeability and unbeatable color stability. It has a maximum grain size of 1.2 mm. With a manual or machine-projected float finish, it is suitable for exteriors and interiors and for walls and ceilings. They are part of the exclusive Webertherm insulation and Weberenova renovation systems. Presentation: 25 Kg plastic drum Colors: Products with color gamut Data sheet: TO DOWNLOAD Primer: • Apply Webertene primer by roller or with a spray bottle as adsorption regulator. It is important that the primer is dry before applying Webertene advance M. This depends on the existing armospheric conditions, but as a general rule, drying is achieved within 24 hours. If it is used as a base mortar for the product Webertene base plus or webertherm flex B, it is not necessary to apply this primer. App: • Apply a Webertene advance M layer with the help of a metal trowel. The ready-to-use mortar is applied completely covering the surface with a thickness of approximately 1.5 mm. Medium: Concrete, cement mortar, lime mortar, paints, wood, synthetic, plaster, concrete block. -
Formwork fillings and structural anchors (60 MPa). Compensated shrinkage fluid mortar that achieves a compressive strength of 60 MPa after 28 days, specially designed for anchoring metallic elements on concrete, as well as anchoring precast concrete elements or filling of formwork, cracks and cavities inside concrete masses. Presentation: 25 kg bags. Colors: Gray Applications:- Backfilling and anchoring of heavy machinery on concrete surfaces.
- Formwork filling and structure reinforcement.
- Filling of cracks and voids inside concrete masses.
- Anchoring of metallic elements on concrete: posts, bolts or pillars.
- Anchors of precast concrete elements.
- Filling by pouring, under support plates and distribution.
-
Form fillings and structural anchors (85 Mpa) Compensated shrinkage fluid mortar, impervious to water, oils and greases, which reaches a compressive strength of 85 MPa after 28 days, specially designed for anchoring metallic elements on concrete, as well as anchoring precast concrete elements. or filling of formwork, cracks and cavities inside concrete masses. Presentation: 25 Kg bags. Colors: Gray Application:- Reinforcement passivator in formwork and anchoring works.
- Structural repair of formwork concrete.
- Increase in section in structural repairs.
- Backfilling and anchoring of heavy machinery on concrete surfaces.
- Formwork filling and structure reinforcement.
- Filling of cracks and voids inside concrete masses.
- Anchoring of metallic elements on concrete: posts, bolts or pillars.
- Anchors of precast concrete elements.
- Filling by pouring, under support plates and distribution
-
App:- Adhesion promoter on smooth concrete in facades after application
- mineral coatings
- Adhesion bridge on ceramic and wooden floors in residential areas.
-
Waterproof and breathable colored mineral mortar for cladding and decoration of facades, indicated to obtain a scratched or rustic finish. Presentation: 25 Kg bags. Colors: 24 chart colors and special colors available (see color chart). Data sheet: TO DOWNLOAD Applications: 1. Interior and exterior. 2. On walls and ceilings. 3. New construction and Rehabilitation Supports: 1. Concrete. 2. Brick and Thermoclay. 3. Concrete block. 4. Lightened blocks. -
Waterproof and breathable colored mineral mortar for cladding and decoration of facades, indicated to obtain a projected stone finish. Presentation: 25 Kg bags. Colors: 10 colors available (see color chart). Data sheet: TO DOWNLOAD Applications: 1. Interior and exterior. 2. On walls and ceilings. Supports: 1. Concrete. 2. Lime mortar. 3. Cement mortar. 4. Brick and Thermoclay. 5. Concrete block. 6. Lightened blocks. -
Applications:- Repair and sealing of pores, cavities and gravel nests on concrete and mortar support.
- Thin-layer cladding of vertical and horizontal structural elements such as floors, columns and beams.
- Surface regularization of all types of concrete: shotcrete, formwork and concrete slabs.
- Edge repair work, joint reprofiling, etc.
- Repair and regularization of facades and walls in rehabilitation
- Suitable for both new construction and rehabilitation.