-
Mineral mortar specially designed for making thin-layer waterproofing plasters on smooth surfaces, on floors, walls or ceilings of buried constructions such as water tanks, ponds, swimming pools, basements, parking lots, elevator shafts, tunnels, foundations, as well as concrete retaining walls. Presentation: 25 Kg bags. Colors: White and grey. Data sheet: TO DOWNLOAD Applications: 1. Waterproofing of buried constructions such as: tanks, ponds, swimming pools, basements, parking lots, elevator shafts, tunnels, foundations, among others. 2. In concrete retaining walls. 3. On floors, walls and ceilings. Supports: 1. Mineral plasters, ceramics, paint and acrylic mortars. 2. Smooth concrete supports. 3. Precast concrete elements. 4. Plasters (pañete) of mortars rich in cement. -
Waterway shutter mortar. One-component, instant-setting, seawater-resistant mortar for plugging small waterways or leaks through cracks or breaks for use both indoors and outdoors. Presentation: 5 Kg plastic drum Colors: Cement gray. Data sheet: TO DOWNLOAD App: • Instantaneous plugging of filtration and waterways, through cracks or breaks. • Floors, walls and ceilings, both indoors and outdoors. • Hydraulic works, galleries, tunnels, ditches, parking lots. • Buried or elevated works. • Applicable to pressure and back pressure of water. Supports: Concrete, solid concrete block, solid ceramic brick and cement-rich mortars. -
Reinforcement geotextile for waterproofing membranes. Polyester technical geotextile for the reinforcement of liquid waterproofing membranes in singular points sensitive to the waterproofing cracking, such as half shells, encounters between different planes, drains, chimneys, pipes and watertight sealing of structural joints and expansion. Presentation: Rolls 100 m long and 1 m wide. Data sheet: TO DOWNLOAD App: • Reinforcement fabric in combination with Weberdry polyurethane liquid membranes. • Treatment of singular points such as half pipes, drains, chimneys, pipes, etc. • Watertight sealing of joints with Weberdry waterproofing membranes on the entire surface to be waterproofed. Medium: In combination with Weberdry liquid polyurethane membrane. -
Special adhesive with high adhesion and flexibility Adhesive Type C2TES1 according to ISO 13007-1 Euroflex is an adhesive designed for use in a highly demanding system. It is used for the placement of low absorption materials in general such as porcelain tiles, natural stones, etc. It is recommended for pavements with intense traffic, since Euroflex provides great flexibility and adherence, as well as to withstand large loads and efforts. Presentation: 20 Kg bags Colors: White. Data sheet: Download -
Melt for floors It is an additive mortar based on cement, mineral pigments in color, aggregates of controlled fine granulometry, synthetic resins in dispersion and organic and inorganic additives. Pigments are resistant to light, water and the basic cement medium. It comes in a wide range of colors to satisfy any requirement, allowing you to create many combinations with the tone and decoration of any ceramic tile. Its greatest quality is that of hardening in a short time, avoiding the formation of cracks and fissures due to its high degree of flexibility, as well as its waterproofing power. It also prevents the appearance of micro-organisms. Scope Ideal for grouting ceramic floors and wall tiles in general up to 5 mm wide between both interior and exterior pieces. In ceramics with microporosities, carry out a test to verify the subsequent cleaning or consult the technical department. Presentation: Sacks of 5 Kg Colors: According to the color chart. Data sheet: Download -
High strength and flexibility adhesive. C2T type adhesive according to ISO 13007-1 standard. Used in highly demanding systems. Its formulation based on Portland cement, selected aggregates, organic additives and resins that improve its workability and adherence to mortar-glue. Scope In the placement of non-absorbent materials in general, such as porcelain stoneware and glass mosaic, indoors and outdoors. In pavements with intense traffic, it provides great flexibility and adherence, as well as high resistance to compression and shear to be able to withstand the loads and efforts caused by the circulation of intense traffic. In facade cladding, thanks to its flexibility, it is able to withstand thermal shocks and the small differential movements produced by the support. Its high adherence makes it possible and very good to place it on old substrates. Presentation: Sacks of 22.7 Kg Colors: Gray. Data sheet: Download -
High adhesion white adhesive Type C1T Adhesive according to ISO 13007-1 This is a white adhesive with high adhesion power, formulated based on white cement, selected aggregates with controlled granulometry, organic additives and resins that improve workability, retention of water and adhesion of the mortar-glue. Fields of application It is also recommended for coating mortar renderings, due to its high adherence it provides a good fixation of the pieces. For the placement of white or translucent (high and medium absorption) ceramic pavements and wall tiles indoors and outdoors and for the placement of ceramic pieces on old mosaic and terrazzo floors. Presentation: Sacks of 22.7 Kg Colors: White. Data sheet: Download -
High adhesion white adhesive Type C1T Adhesive according to ISO 13007-1 This is a white adhesive with high adhesion power, formulated based on white cement, selected aggregates with controlled granulometry, organic additives and resins that improve workability, retention of water and adhesion of the mortar-glue. Fields of application It is also recommended for coating mortar renderings, due to its high adherence it provides a good fixation of the pieces. For the placement of white or translucent (high and medium absorption) ceramic pavements and wall tiles indoors and outdoors and for the placement of ceramic pieces on old mosaic and terrazzo floors. Presentation: Sacks of 22.7 Kg Colors: White. Data sheet: Download -
Adhesive mixture for fixing ceramics and stoneware, for interior and exterior use. Formulated from hydraulic binders with a white or gray base, aggregates of balanced granulometry and additives that give it properties of adherence, water retention, fluidity and controlled workability. Use and Application Used for laying ceramic tiles with high water absorption (absorption 7-25%). Recommended for conditions with minimal requirements, such as interior walls, low traffic floors, etc. Recommended for laying ceramic tiles, stoneware, porcelain tiles and mosaics on mortar, concrete or concrete surfaces. It is recommended to knead manually or mechanically in small quantities of the product for better homogeneity. It is recommended to use a notched trowel as a tool for the application of this product, which will allow a better adhesion between the substrate and the mixture. Presentation: Sacks of 22.7 Kg Colors: Gray. Data sheet: Download -
Pegacol - Adhesive for ceramic and stoneware. Type C1T Adhesive According to ISO 13007-1 Ceramic adhesive composed of Portland cement, organic and inorganic additives, aggregates of selected granulometry and synthetic resins that improve workability, water retention and adhesive mortar adhesion. Fields of application Designed to be used for laying high and medium absorption ceramic floor and wall tiles on substrates covered with mortar, concrete, mosaic, and artificial stone. Its use or employment is recommended for interiors. Presentation: Sacks of 22.7 Kg Colors: Gray. Data sheet: Download -
Readymix Color Monolayer color coating consisting of a white cement mortar, selected aggregates and controlled granulometry, pigments, hydrophobic compounds and organic and inorganic additives to improve the application and adherence of the product; ready to be kneaded with water. Scope Indicated for plastering walls both indoors and outdoors. Once applied, it provides an economically competitive, clean and durable facade cladding. It can replace the traditional fogging system with more paint. Presentation: 42.5 Kg sacks Colors: See the color chart. Data sheet: Download -
Skin Coat Panel Skin-Coat PANEL, is a mortar designed based on special cementitious binders, selected aggregates and selected granulometry, high performance chemical additives and modified polymers, resulting in a flexible mortar with great workability, specially designed to cover in thin layers up to 2mm, different types of panels indoors and outdoors. Properties Fine finish, allowing to cover small cracks. Excellent flexibility and adherence. Use of flexible modified polymers, reducing the risk of cracks and increasing resistance to bending and tension. Easy to prepare, just add water. Presentation: Sacks of 22.7 Kg Colors: Gray. Data sheet: Download
