Waterway shutter mortar. One-component, instant-setting, seawater-resistant mortar for plugging small waterways or leaks through cracks or breaks for use both indoors and outdoors.Presentation: 5 Kg plastic drumColors: Cement gray.Data sheet: TO DOWNLOADApp:• Instantaneous plugging of filtration and waterways, through cracks or breaks. • Floors, walls and ceilings, both indoors and outdoors. • Hydraulic works, galleries, tunnels, ditches, parking lots. • Buried or elevated works. • Applicable to pressure and back pressure of water.Supports:Concrete, solid concrete block, solid ceramic brick and cement-rich mortars.- Reinforcement geotextile for waterproofing membranes. Polyester technical geotextile for the reinforcement of liquid waterproofing membranes in singular points sensitive to the waterproofing cracking, such as half shells, encounters between different planes, drains, chimneys, pipes and watertight sealing of structural joints and expansion.Presentation: Rolls 100 m long and 1 m wide.Data sheet: TO DOWNLOADApp:• Reinforcement fabric in combination with Weberdry polyurethane liquid membranes. • Treatment of singular points such as half pipes, drains, chimneys, pipes, etc. • Watertight sealing of joints with Weberdry waterproofing membranes on the entire surface to be waterproofed.Medium:In combination with Weberdry liquid polyurethane membrane.
- Kit for waterproofing in areas subject to possible small movements and with risk of cracking before laying a ceramic coating, consisting of 25 kg. of powdered mortar and a bottle of 8.3 kg. of latex to be mixed.
PRESENTATION:
Component A 25 kg bag. Color: Gray powder. Component B 8.3 kg drum. Color: White liquid.APPLICATIONS:
- Waterproofing of balconies, terraces (even paved), roofs and, in general, absorbent and non-absorbent substrates, always being stable and consistent
- Waterproofing of showers, bathtubs and swimming pools, before laying ceramic tiles
- Flexible support coatings with small cracks in concrete and precast structures
- Protection of concrete surfaces against the action of carbon dioxide, smog, chlorides, sulfates, etc.
- Retaining wall waterproofing coatings
- Waterproofing of water tanks (suitable for drinking water, ARPA cert. By virtue of Ministerial Decree 174/2004), being necessary to wash with clean water after setting. Associated coatings: Mineral plasters, ceramics, paints and acrylic mortars
- SUPPORTS
- Smooth concrete, precast concrete elements, mortar and ceramic plasters
- Fiberglass mesh with antialkaline surface treatment for reinforcing thin-film coatings in webertherm exterior thermal insulation systems, with a density of 155 gr / m2 and a mesh opening of 3.5 x 3.8 mm.Presentation: 55 m2 rolls. Webertherm 160 mesh is a fiberglass mesh combined with specially designed anti-alkali surface treatments, and usable in a wide range of applications. Weber.therm base regularizing mortar reinforcement in weber.therm insulation systems.
- High mechanical resistance
- Excellent dimensional stability
- Great deformability
- Excellent tensile and elongation resistance
- Anti-alkali treatment
- Quick and easy installation
- Substrates: Lime mortar, Cement mortar
- App:
- Adhesion promoter on smooth concrete in facades after application
- mineral coatings
- Adhesion bridge on ceramic and wooden floors in residential areas.
- Applications:
- Repair and sealing of pores, cavities and gravel nests on concrete and mortar support.
- Thin-layer cladding of vertical and horizontal structural elements such as floors, columns and beams.
- Surface regularization of all types of concrete: shotcrete, formwork and concrete slabs.
- Edge repair work, joint reprofiling, etc.
- Repair and regularization of facades and walls in rehabilitation
- Suitable for both new construction and rehabilitation.
- Supports:Any mortar from the weberpral, webercal or weberev range. o Webertherm base and webertherm base plus high performance mortar. o Concrete, lightened concrete or aerated concrete. o Paints and synthetic coatings o Plaster Technical Data: Download
- Applications:• Highly decorative ready-to-use thin-layer acrylic coating, with a circular or linear floated finish, is suitable for exterior and interior, and for walls and ceilings. They are part of the exclusive webertherm insulation and weberenova renovation systems. • Formula specially developed to obtain extra protection against the proliferation of microorganisms. • For other applications, consult our Technical Department. • Available in 2 granulometries: L: max 1.5 mm XL: max 2.5 mm Technical Data: Download
- Thick layer lime plaster.Lime mineral mortar with hydraulic binders, designed for use as a plaster base for all types of two-layer solutions and especially suitable for lime-based two-layer solutions with finish coatings such as render or stucco.Presentation: 25 kg bagsColors: Gray and whiteApp:Lime mortar for thick layer rendering of facades, both in new construction and in rehabilitation.
- It is a good base for all types of two-layer solutions and is especially suitable for lime-based two-layer solutions (plasters and stucco) in: o exterior and interior, o walls and ceilings.
- For other applications, consult our Technical Department.
- Plastering and assembly of traditional masonry walls.Ready-to-use dry mortar type M-7.5, indicated both for the assembly of all types of ceramic and concrete block walls, as well as for traditional interior or exterior plastering.Presentation: 25 Kg bags.Colors: White and grey.App:
- Dry mortar type M-7.5, ready to use, for assembly and assembly of all types of ceramic and concrete blocks.
- Suitable for traditional indoor and outdoor plastering.
- For other applications, consult our Technical Department.
- Form fillings and structural anchors (85 Mpa)Compensated shrinkage fluid mortar, impervious to water, oils and greases, which reaches a compressive strength of 85 MPa after 28 days, specially designed for anchoring metallic elements on concrete, as well as anchoring precast concrete elements. or filling of formwork, cracks and cavities inside concrete masses. Presentation: 25 Kg bags. Colors: Gray Application:
- Reinforcement passivator in formwork and anchoring works.
- Structural repair of formwork concrete.
- Increase in section in structural repairs.
- Backfilling and anchoring of heavy machinery on concrete surfaces.
- Formwork filling and structure reinforcement.
- Filling of cracks and voids inside concrete masses.
- Anchoring of metallic elements on concrete: posts, bolts or pillars.
- Anchors of precast concrete elements.
- Filling by pouring, under support plates and distribution
- Formwork fillings and structural anchors (60 MPa).Compensated shrinkage fluid mortar that achieves a compressive strength of 60 MPa after 28 days, specially designed for anchoring metallic elements on concrete, as well as anchoring precast concrete elements or filling of formwork, cracks and cavities inside concrete masses. Presentation: 25 kg bags. Colors: Gray Applications:
- Backfilling and anchoring of heavy machinery on concrete surfaces.
- Formwork filling and structure reinforcement.
- Filling of cracks and voids inside concrete masses.
- Anchoring of metallic elements on concrete: posts, bolts or pillars.
- Anchors of precast concrete elements.
- Filling by pouring, under support plates and distribution.
