-
Gypsum Stucco Lightweight finishing mortar, based on gypsum, for interior stucco on walls and ceilings, with guaranteed durability. Formulated with additives that improve adhesion on a wide variety of substrates, improve water retention, improve mix consistency and stability, and confer repellency and hydrophobicity. Use and application Stucco for interior plastering of walls and ceilings, for application in a thin layer (0.1-3.0) mm. It complies with the performance certificate B4 and C7 in accordance with the provisions of the UNE-EN 13297-1 Standard. Presentation: Sacks of 13 Kg Colors: White. Data sheet: Download -
High strength and flexibility adhesive. C2T type adhesive according to ISO 13007-1 standard. Used in highly demanding systems. Its formulation based on Portland cement, selected aggregates, organic additives and resins that improve its workability and adherence to mortar-glue. Scope In the placement of non-absorbent materials in general, such as porcelain stoneware and glass mosaic, indoors and outdoors. In pavements with intense traffic, it provides great flexibility and adherence, as well as high resistance to compression and shear to be able to withstand the loads and efforts caused by the circulation of intense traffic. In facade cladding, thanks to its flexibility, it is able to withstand thermal shocks and the small differential movements produced by the support. Its high adherence makes it possible and very good to place it on old substrates. Presentation: Sacks of 22.7 Kg Colors: Gray. Data sheet: Download -
Special adhesive with high adhesion and flexibility Adhesive Type C2TES1 according to ISO 13007-1 Euroflex is an adhesive designed for use in a highly demanding system. It is used for the placement of low absorption materials in general such as porcelain tiles, natural stones, etc. It is recommended for pavements with intense traffic, since Euroflex provides great flexibility and adherence, as well as to withstand large loads and efforts. Presentation: 20 Kg bags Colors: White. Data sheet: Download -
Melt for floors It is an additive mortar based on cement, mineral pigments in color, aggregates of controlled fine granulometry, synthetic resins in dispersion and organic and inorganic additives. Pigments are resistant to light, water and the basic cement medium. It comes in a wide range of colors to satisfy any requirement, allowing you to create many combinations with the tone and decoration of any ceramic tile. Its greatest quality is that of hardening in a short time, avoiding the formation of cracks and fissures due to its high degree of flexibility, as well as its waterproofing power. It also prevents the appearance of micro-organisms. Scope Ideal for grouting ceramic floors and wall tiles in general up to 5 mm wide between both interior and exterior pieces. In ceramics with microporosities, carry out a test to verify the subsequent cleaning or consult the technical department. Presentation: Sacks of 5 Kg Colors: According to the color chart. Data sheet: Download -
Mix pañete M10 class masonry mortar for interior and exterior wall finishes. Composed of Portland type cement, selected aggregates and additives. Designed with technically controlled proportions that give it adhesion, cohesiveness, fluidity and texture properties in a fresh state, as well as durability, good appearance and mechanical resistance in a hardened state. Use and Application: This mortar is recommended to be applied to the finishes or finishes of the walls, masonry, concrete, bricks or encaches, both indoors and outdoors. To obtain the desired workability, it is necessary to knead in a mortar mixer. For small quantities or leagues, they can be mixed manually. Presentation: 42.5 Kg sacks Appearance: Gray powder of medium granulometry. Data sheet: Download -
Fine pañete mix Fine-grained masonry mortar (less than 0.6 mm), for interior wall finishes. Composed of Portland type cement, selected aggregates and additives. Designed with technically controlled proportions that give it adhesion, cohesiveness, fluidity and texture properties in a fresh state, as well as durability, good appearance and mechanical resistance in hardened states. Also available with waterproof properties. This mortar is recommended to be applied indoors on walls, masonry, concrete, brick or mortar. To obtain the desired workability, it is necessary to knead in a mortar mixer. For small quantities or leagues, they can be mixed manually. Presentation: 42.5 Kg bags Colors: Gray Technical Data: Download -
Rustic pañete mix Rustic granulometry masonry mortar (up to 2.36 mm), for interior or exterior wall finishes for structural or high-resistance use. Composed of Portland type cement, selected aggregates and additives. Designed with technically controlled proportions that give it adhesion, cohesiveness, fluidity and texture properties in a fresh state, as well as durability, good appearance and mechanical resistance in a hardened state. Use and application This mortar is recommended to be applied indoors or outdoors, on walls, masonry, concrete, brick or mortar. The size of its aggregates only allows to obtain rough finishes. To obtain the desired workability, it is necessary to knead in a mortar mixer. For small quantities or leagues, they can be mixed manually. Presentation: 42.5 Kg sacks Appearance: Gray powder of medium granulometry. Data sheet: Download -
Plaster Mix Pre-mixed dry mortar for plastering panels (polystyrene or foam) with indoor or outdoor application. Composed of type I Portland cement, selected aggregates and additives that give it controlled adhesion, cohesiveness, fluidity and texture properties in the fresh state, as well as mechanical resistance and excellent appearance in the hardened state. Use and Application Mortar recommended for the correction of modular panels (expanded polystyrene type) or divisions reinforced by steel mesh, both in interior installations (load-bearing or non-load-bearing) and outside (facades with load-bearing or non-load-bearing characteristics). To obtain the desired workability, it is recommended to knead in a mortar mixer. For small quantities or leagues, they can be mixed manually within a wheelbarrow or other controlled surface to avoid contamination with external agents or disproportion of the mixture. Presentation: Sacks of 42.5 Kg Colors: Gray SPECIAL MORTARS Technical Sheet: Download -
Adhesive mixture for fixing ceramics and stoneware, for interior and exterior use. Formulated from hydraulic binders with a white or gray base, aggregates of balanced granulometry and additives that give it properties of adherence, water retention, fluidity and controlled workability. Use and Application Used for laying ceramic tiles with high water absorption (absorption 7-25%). Recommended for conditions with minimal requirements, such as interior walls, low traffic floors, etc. Recommended for laying ceramic tiles, stoneware, porcelain tiles and mosaics on mortar, concrete or concrete surfaces. It is recommended to knead manually or mechanically in small quantities of the product for better homogeneity. It is recommended to use a notched trowel as a tool for the application of this product, which will allow a better adhesion between the substrate and the mixture. Presentation: Sacks of 22.7 Kg Colors: Gray. Data sheet: Download -
Pegacol - Adhesive for ceramic and stoneware. Type C1T Adhesive According to ISO 13007-1 Ceramic adhesive composed of Portland cement, organic and inorganic additives, aggregates of selected granulometry and synthetic resins that improve workability, water retention and adhesive mortar adhesion. Fields of application Designed to be used for laying high and medium absorption ceramic floor and wall tiles on substrates covered with mortar, concrete, mosaic, and artificial stone. Its use or employment is recommended for interiors. Presentation: Sacks of 22.7 Kg Colors: Gray. Data sheet: Download -
High adhesion white adhesive Type C1T Adhesive according to ISO 13007-1 This is a white adhesive with high adhesion power, formulated based on white cement, selected aggregates with controlled granulometry, organic additives and resins that improve workability, retention of water and adhesion of the mortar-glue. Fields of application It is also recommended for coating mortar renderings, due to its high adherence it provides a good fixation of the pieces. For the placement of white or translucent (high and medium absorption) ceramic pavements and wall tiles indoors and outdoors and for the placement of ceramic pieces on old mosaic and terrazzo floors. Presentation: Sacks of 22.7 Kg Colors: White. Data sheet: Download -
High adhesion white adhesive Type C1T Adhesive according to ISO 13007-1 This is a white adhesive with high adhesion power, formulated based on white cement, selected aggregates with controlled granulometry, organic additives and resins that improve workability, retention of water and adhesion of the mortar-glue. Fields of application It is also recommended for coating mortar renderings, due to its high adherence it provides a good fixation of the pieces. For the placement of white or translucent (high and medium absorption) ceramic pavements and wall tiles indoors and outdoors and for the placement of ceramic pieces on old mosaic and terrazzo floors. Presentation: Sacks of 22.7 Kg Colors: White. Data sheet: Download -
Adhesive for porcelain and stoneware Adhesive Type C2 according to ISO 13007-1 standard Pegacol Porcelánico is an adhesive designed for laying ceramic and porcelain floor and wall tiles on mortar, concrete, mosaic, artificial stone substrates indoors and outdoors. It offers high fixing power and easy application. Presentation: 22.7 Kg bags Colors: Grey. Data sheet: TO DOWNLOAD -
Readymix Block Concrete Block Laying Mix Readymix Block is a mortar designed to bond masonry units or walls such as blocks or bricks. Made from Portland cement and controlled granulometry aggregates to achieve the best adherence of the product. Medium The blocks must be stable and free from remains of other materials, grease, paint, etc. Having eliminated possible surface dust. The supports in which it can be used are: Clay Bricks. Concrete blocks. Presentation: Bags of 42.5 Kg Colors: Gray Technical Sheet: Download -
Readymix Color Monolayer color coating consisting of a white cement mortar, selected aggregates and controlled granulometry, pigments, hydrophobic compounds and organic and inorganic additives to improve the application and adherence of the product; ready to be kneaded with water. Scope Indicated for plastering walls both indoors and outdoors. Once applied, it provides an economically competitive, clean and durable facade cladding. It can replace the traditional fogging system with more paint. Presentation: 42.5 Kg sacks Colors: See the color chart. Data sheet: Download -
Readymix construction grout Standard UNE-EN 1504-3 UNE-EN 1504-06 Multipurpose non-shrink mortar Readymix Construction Grout is a fluid, non-shrink mortar designed on the basis of special hydraulic binders, aggregates of selected granulometry and chemical additives. Scope Ideal to be used for anchoring machinery, filling metal pillars, fixing bolts in walls, reinforcing and repairing concrete structures, joining concrete and filling holes in concrete. Properties: Great adhesion. No retraction. High mechanical resistance. Excellent fluidity without segregation. Presentation: Sacks of 25 Kg Colors: Gray Technical Sheet: Download -
Structural Readymix Mix for structural panels It is a structural mortar made of gray cement, selected aggregates of controlled granulometry, fibers and additives that improve the workability, consistency, adherence, mechanical resistance and workmanship of the product. Medium Applied on polystyrene supports with steel reinforcements, concrete walls and porous surfaces. The support must be stable and free from remains of other materials, grease, paints, plasters, etc. Having eliminated possible surface dust, depending on whether it is to be applied in new construction or in rehabilitation work. Presentation: Bags of 42.5 Kg Colors: Gray Technical Sheet: Download -
Readymix Hidrofugo Readymix Hidrofugo is an ideal mortar for those places constantly exposed to rainwater. Developed with aggregates of controlled granulometry additives that improved the impermeability for the plastering of walls in exteriors or interiors. This mortar provides a standard finish coating with water repellent qualities. Medium The support must be stable and free from remains of other materials, grease, paints, plasters, etc. Having eliminated possible surface dust, depending on whether it is to be applied in new construction or in rehabilitation work. The supports that can be plastered are: Ceramic bricks Non-waterproof concrete blocks. Presentation: 42.5 Kg Color: Gray Technical Data: Download -
Readymix Dry concrete Readymix Dry Concrete 180 or 210 is a dry concrete for construction that develops a resistance of more than 180 or 210 Kg / cm2, it can be applied in pavements, foundations, fillings, pipes, small repairs, manufacture of concrete walls and partitions. App Applications for the construction of pavements, foundations, fillings, pipes, small repairs, manufacture of concrete walls and partitions. Presentation: 42.5 Kg Color: Gray Technical Sheet: Download -
It is a mortar for plastering exterior and interior walls. This mortar provides a standard finish facade coating on vertical supports. Characterized by being an economical, clean and durable coating. MEDIUM The support must be stable and free from remains of other materials, grease, paints, plasters, etc. Having eliminated possible surface dust, depending on whether it is to be applied in new construction or in rehabilitation work. The supports that can be plastered are: Ceramic bricks Non-waterproof concrete blocks. Presentation: 42.5 Kg Color: Gray Technical Sheet: Download -
Refractory Readymix Readymix Refractory is a dry refractory mortar based on special hydraulic binders, high purity refractory sand and selected granulometry and chemical additives. Designed for the placement of refractory pieces such as masonry bricks in areas exposed to high temperatures, guaranteeing a resistance of up to 1,000 Cº. Refractory Readymix is also ideal for plastering vertical structures that are exposed to high temperatures. Presentation: Sacks of 25 Kg Colors: Gray Technical Sheet: Download -
Skin Coat Panel Skin-Coat PANEL, is a mortar designed based on special cementitious binders, selected aggregates and selected granulometry, high performance chemical additives and modified polymers, resulting in a flexible mortar with great workability, specially designed to cover in thin layers up to 2mm, different types of panels indoors and outdoors. Properties Fine finish, allowing to cover small cracks. Excellent flexibility and adherence. Use of flexible modified polymers, reducing the risk of cracks and increasing resistance to bending and tension. Easy to prepare, just add water. Presentation: Sacks of 22.7 Kg Colors: Gray. Data sheet: Download -
Skin Coat Stucco Cladding putty Skin-Coat is a dry stucco that, when mixed with water, forms a paste (stucco), it is a product formulated based on various acrylic resins added with calcium carbonate of controlled granulometry, lime and other additives that improve the technical properties of the stucco. The resulting product is a stucco that combines the best plasticity, adherence and hardness properties. Medium When applying stucco to a wall, you must ensure that it is perfectly smooth, both visually and to the touch. The supports with the greatest adherence are those made of wood and plaster. The surfaces to be treated must be free of dirt such as dust, grease and mold. Presentation: Bags of 14 Kg Colors: White or Gray Technical Sheet: Download -
Plastering and assembly of traditional masonry walls. Ready-to-use dry mortar type M-7.5, indicated both for the assembly of all types of ceramic and concrete block walls, as well as for traditional interior or exterior plastering. Presentation: 25 Kg bags. Colors: White and grey. App:- Dry mortar type M-7.5, ready to use, for assembly and assembly of all types of ceramic and concrete blocks.
- Suitable for traditional indoor and outdoor plastering.
- For other applications, consult our Technical Department.
-
Formwork fillings and structural anchors (85 Mpa) Compensated shrinkage fluid mortar, impervious to water, oils and greases, which achieves a compressive strength of 85 MPa after 28 days, specially designed for anchoring metallic elements on concrete, as well as anchoring precast concrete elements or filling of formwork, cracks and cavities inside concrete masses. Presentation: 25 Kg bags. Colors: Gray Application: • Reinforcement passivator in formwork and anchoring works. • Structural repair of formwork concrete. • Increase in section in structural repairs. • Backfilling and anchoring of heavy machinery on concrete surfaces. • Filling of formwork and reinforcement of structures. • Filling of cracks and voids inside concrete masses. • Anchoring of metallic elements on concrete: posts, bolts or pillars. • Anchors of precast concrete elements. • Filling by pouring, under support plates and distribution Data sheet: Download
-
Polymerization exothermic reaction hardening vinyl ester epoxy resin for high strength anchors with threaded rods or rebar, specially designed to support very heavy loads. Presentation: Vending box of 12 cartridges (300ml cartridges) Colour: Gray Data sheet: TO DOWNLOAD Applications: • High strength anchors with threaded rods or cross bars • Walls, floors and ceilings • Interior and exterior Supports: Concrete and cement mortar. -
Polyurethane adhesive putty for sealing all types of joints and fissures (expansion joints, structural joints, joints between materials, among others). Multipurpose elastic bonding of materials such as partitions, partitions, fiber cement or melanin plates, tiles, wood, ceramics, baseboards, etc. Presentation: 600 ml sausage and 300 ml cartridges. Colors: White, Gray, Brown and Black. Data sheet: TO DOWNLOAD Applications:- Sealing of all types of joints and fissures such as expansion joints, structural joints, joints between materials, etc.
- Multipurpose elastic bonding of materials such as partitions, partitions, fiber cement or melanin plates, wooden tiles, ceramics, baseboards, etc.
- Joint sealing of precast concrete elements
- High adhesion on all types of supports.
-
Polyurethane adhesive putty for sealing all types of joints and fissures (expansion, structural, joint between materials, among others). Multi-purpose elastic bonding of materials such as partitions, partitions, fibercement or melanin plates, tiles, wood, ceramics, baseboards, etc.
Presentation: 600 ml Salchichón and 300 ml Cartridges. Colors: White, Gray, Brown and Black. Data sheet: https://www.es.weber/files/es/2018-07/FTC-ES-P-weber-flex-p100.pdf.pdf Applications:- Sealing of all types of joints and fissures such as expansion joints, structural joints, joints between materials, etc.
- Multipurpose elastic bonding of materials such as partitions, partitions, fiber cement or melanin plates, wooden tiles, ceramics, baseboards, etc.
- Joint sealing of precast concrete elements
- High adhesion on all types of supports.
-
Expansive polyurethane foam for filling and sealing gaps or holes in walls and ceilings in contact with the outside and for treating thermal bridges, as well as for spot gluing EPS tiles and plates. Presentation: Box of 12 sprays of 750 ml for spray application. Colour: Yellow Data sheet: TO DOWNLOAD Applications:- Sealing of gaps, holes in walls and ceilings with the exterior and thermal bridges.
- Door and window assemblies.
- Acoustic screen and silencer layer applications.
- Optimization of insulation in refrigeration.
- Spot gluing of EPS tiles and plates.
- High adhesion on all types of substrates, except PE and PP.
-
Expansive polyurethane foam for filling and sealing gaps or holes in walls and ceilings in contact with the outside and treating thermal bridges, as well as for the specific gluing of EPS tiles and plates Presentation: Box of 12 sprays of 750 ml for spray application. Color: Yellow Data sheet: https://www.es.weber/files/es/2018-07/FTC-ES-P-weber-foam-pu-32.pdf.pdf
Applications:
- Sealing of gaps, holes in walls and ceilings with the exterior and thermal bridges.
- Door and window assemblies.
- Acoustic screen and silencer layer applications.
- Optimization of insulation in refrigeration.
- Spot gluing of EPS tiles and plates.
- High adhesion on all types of substrates, except PE and PP.
-
Multipurpose concentrated latex. Liquid additive to increase adhesion and flexibility, as well as the surface hardness of cementitious products. Presentation: 10 kg drum - 400 kg pallet (40 units) Data sheet: TO DOWNLOAD Applications:- Additivation of glue mortars to increase their adherence and flexibility in extreme situations.
- Additivation of grouting mortars in thin-layer repairs.
- Additivation of monolayer mortars if applied on weak substrates.
- Increase the adhesion of cement grouts.
-
Multipurpose concentrated latex. Liquid additive to increase adhesion and the flexibility, as well as the surface hardness of cementitious products. Presentation: 10 kg drum - 400 kg pallet (40 units) Data sheet: https://www.es.weber/files/es/2018-07/FTC-ES-P-weber-latex-c10.pdf.pdf Applications:
- Additivation of glue mortars to increase their adherence and flexibility in extreme situations.
- Additivation of grouting mortars in thin-layer repairs.
- Additivation of monolayer mortars if applied on weak substrates.Increase the adherence of cement grouts.
-
Lime mineral mortar with hydraulic binders, designed for use as a plaster base for all types of two-layer solutions and especially suitable for lime-based two-layer solutions with finish coatings such as render or stucco. Presentation: 25 Kg bags. Colors: Gray and white. Data sheet: TO DOWNLOAD- Lime mortar for thick layer rendering of facades, both in new construction and in rehabilitation.
- It constitutes a good base for all types of two-layer solutions and is especially suitable for lime-based two-layer solutions (plasters and stucco) in:
- Exteriors and interiors,
- Walls and ceilings.
- For other applications, consult our Technical Department.
- Brick Enclosures
- Thermoclay Block
- Concrete block
- Traditional mortar plastering type M-7, 5.
-
Lime mineral mortar with hydraulic binders, designed for use as a plaster base for all types of bilayer solutions and especially suitable for lime based bilayer solutions with finish coatings such as plasters or stuccos. Presentation: 25 Kg bags. Colors: Gray and White. Technical Sheet: https://www.es.weber/files/es/2018-07/FTC-ES-P-webercal-basic.pdf.pdf Applications: - Lime mortar for plastering facades in thick layers, both in new construction and in renovation. - It constitutes a good base for all types of bilayer solutions and is especially suitable for bilayer solutions based on lime (plaster and stucco) in: - Exteriors and interiors, - Walls and ceilings. - For other applications, consult our Technical Department. Supports: - Brick Enclosures - Thermoclay Block - Concrete block - Traditional mortar plastering type M-7, 5.
-
Thick layer lime plaster. Lime mineral mortar with hydraulic binders, designed for use as a plaster base for all types of two-layer solutions and especially suitable for lime-based two-layer solutions with finish coatings such as render or stucco. Presentation: 25 kg bags Colors: Gray and white App: Lime mortar for thick layer rendering of facades, both in new construction and in rehabilitation.- It is a good base for all types of two-layer solutions and is especially suitable for lime-based two-layer solutions (plasters and stucco) in: o exterior and interior, o walls and ceilings.
- For other applications, consult our Technical Department.
-
Thick-layer lime plaster. Lime mineral mortar with hydraulic binders, designed for use as a plaster base for all types of two-layer solutions and especially suitable for lime-based two-layer solutions with finish coatings such as render or stucco. Presentation: 25 kg bags Colors: Gray and white Application: Lime mortar for thick layer rendering of facades, both in new construction and in rehabilitation. It is a good base for all types of two-layer solutions and is especially suitable for lime-based two-layer solutions (render and stucco) in: o exterior and interior, o walls and ceilings. For other applications, consult our Technical Department. Data sheets: Download
