-
Adhesive paste for laying ceramic tiles on interior walls, especially on deformable supports such as plasterboard and on old tiling. Presentation: 25 Kg bucket. Colors: Off white. Applications: - Ceramic coatings on interior walls, especially on deformable supports and old tiling. Supports: - Old tiling. - Deformable supports (plasterboard). - Plaster plasters. - Painted surfaces. Technical Sheet: Download -
Adhesive mortar suitable for thick layer laying of medium / high porosity tiles and stoneware, both on floors and interior cladding. Without plastering the support, without sagging and up to 30mm thick. Presentation: 25 Kg bags. Colors: Gray and white. Applications:- Interior coatings.
- Indoor flooring.
- Cement-based floors. · Walls plastered with sand mortar, cement and ceramic brick.
-
Glue mortar suitable for laying thick and medium / high porosity tiles and stoneware, both on floors and on interior cladding. Without plastering the support, without hanging and up to 30mm thick. Presentation: 25 Kg bags. Colors: Gray and White. Applications: - Interior coatings. - Indoor flooring. Supports: - Cement-based floors. · Walls plastered with sand mortar, cement and ceramic brick. Technical Sheet: https://www.es.weber/files/es/2018-07/FTC-ES-P-webercol-capa-gruesa.pdf.pdf
-
Special adhesive for laying medium / high porosity tiles and stoneware on plaster and plaster plastered substrates on interior walls. Presentation: 25 Kg bags. Colors: White. Applications:- Interior coverings of tiles and stoneware of medium / high porosity.
- Traditional gypsum plaster, prefabricated plaster and mortar plates and panels.
- Suitable for anhydrite supports.
-
Special adhesive for laying medium / high porosity tile and stoneware on supports plastered with plaster and plaster on interior walls. Presentation: 25 Kg bags. Colors: White. Applications: - Interior coatings of tiles and stoneware of medium / high porosity. Supports: - Traditional gypsum plaster, precast plaster and mortar boards and panels. - Suitable for anhydrite supports. Technical Sheet: Download
-
High-performance adhesive with mixed cement and resin binders, long open time and slip resistant, suitable for laying ceramic, marble, mosaics, glass paste, etc., on exterior and interior floors and interior wall tiles. Suitable for placement in swimming pools.
Presentation: 25 Kg bags.
Colors: Gray and white.
Data sheet: TO DOWNLOAD
Applications:
Interior coatings and interior and exterior flooring, both in residential areas (kitchens, dining rooms, bathrooms) and urban areas.
- Suitable for terraces, balconies and outdoor pavements in general subjected to permanent humidity and frost.
- Suitable for permanent immersion and humid environments such as swimming pools, bathrooms, shower trays, saunas, spas, tanks, cold rooms, etc.
Supports:
- Cement-based screeds and self-leveling mortars.
- Walls plastered with cement mortar and bastard mortar.
- Sheets of laminated plaster (plasterboard) waterproofed and not waterproofed.
- Fiber cement boards indoors.
- Rigid cementitious waterproofing (type weber.tec imper F or weber.tec imper G) and flexible (type weber.tec imperflex).
-
High performance adhesive with mixed cement and resin binders, long open time and slip resistant, suitable for laying ceramic, marble, mosaics, glass paste, etc., on exterior and interior flooring and interior cladding. Suitable for placement in pools. Presentation: 25 Kg bags. Colors: Gray and White. Technical Sheet: https://www.es.weber/files/es/2018-11/FTC-ES-P-webercol-dur.pdf Applications: Interior cladding and interior and exterior paving, both in residential areas (kitchens, dining rooms, bathrooms) and urban areas. - Suitable for terraces, balconies and outdoor pavements in general subject to permanent humidity and frost. - Suitable for permanent immersion and wet environments such as swimming pools, baths, shower trays, saunas, spas, tanks, cold rooms, etc. Supports: - Cement-based screeds and self-leveling mortars. - Walls plastered with cement mortar and bastard mortar. - Laminated gypsum boards (gypsum board) waterproofed and non-waterproofed. Indoor fiber cement plates. -Rigid cementitious waterproofing (type weber.tec imper F or weber.tec imper G) and flexible (type weber.tec imperflex).
-
One-component, fast-setting and highly deformable adhesive (C2FTES2) formulated with mixed cement-resin binders that allows the rapid commissioning of the placed ceramic. Suitable for laying all types of ceramic, marble, natural stone or similar tiles of any absorption and format, especially large ones. Suitable for supports that are deformable or subject to movements or vibrations (wood, webertec hydrolastic type elastic waterproofing). Placements on interior and exterior flooring and cladding. Suitable for facades. Presentation: 25 Kg bags. Colors: Gray. Applications: • Interior and exterior coatings and flooring in residential, commercial, industrial and urban areas. • Indoor flooring and cladding in residential areas such as kitchens, dining rooms, bathrooms, ... • Indoor ceramic tile laying directly on existing ceramic flooring or cladding in residential, commercial and industrial areas • High traffic flooring and large surfaces where it is need quick commissioning. • Laying radiant heating floors with pieces of any format and absorption, especially suitable for large formats. • Placement of ceramic in anhydrite screeds, after applying weberprim TP05, diluted 1: 5. • Industrial and commercial flooring subjected to heavy traffic. • Placement of ceramic on interior wooden walls and floors after applying weberprim FX15. • Suitable for terraces, balconies and outdoor pavements in general subjected to permanent humidity and frost. • Suitable for permanent immersion and humid environments such as swimming pools, bathrooms, shower trays, saunas, spas, tanks, cold rooms, etc. • Coatings on facades. • Laying of ceramic on elastic waterproofing (webertec hydrolastic type) with pieces of format up to 2,400 cm. Supports: • Cement-based screeds and self-leveling mortars. • Walls plastered with cement mortar and bastard mortar. • Concrete, precast concrete and aerated concrete. • Gypsum plasters, prefabricated gypsum and / or plaster panels. • Waterproof and non-waterproofed laminated plasterboard (plasterboard). • Fiber cement plates. • Pre-existing ceramic, terrazzo, natural stone flooring and wall tiles, etc. • Anhydrite floors • Radiant heating floors (cement or anhydrite base). • Rigid cementitious waterproofing (type webertec imper F or webertec imper G) and flexible (type webertec imperflex). • Elastic waterproofing (webertec hydrolastic type). • Rigid cementitious waterproofing (type webertec imper F or webertec imper G) and flexible (type webertec imperflex). • Elastic waterproofing (webertec hydrolastic type). • Wooden substrates after applying weberprim FX15 express. • Elastic waterproofing (webertec hydrolastic type) with pieces of format up to 2,400 cm. Data sheet: TO DOWNLOAD -
One-component, fast-setting and highly deformable adhesive (C2FTES2) formulated with mixed cement-resin binders that allows the quick commissioning of the installed ceramic. Suitable for laying all kinds of ceramic tiles, marble, natural stone or the like of any absorption and format, and especially large format. Suitable for deformable supports or subject to movement or vibrations (wood, elastic waterproofing type webertec hydrolastic). Placements in interior and exterior pavements and coatings. Suitable for facades. Presentation: 25 Kg bags. Colors: Gray. Applications: • Interior and exterior coatings and pavements in residential, commercial, industrial and urban areas. • Indoor flooring and cladding in residential areas such as kitchens, dining rooms, bathrooms, ... • Indoor ceramic laying directly on pre-existing ceramic flooring or cladding in residential, commercial and industrial areas • Heavy traffic pavements and large surfaces where rapid commissioning is required. • Laying of radiant heating floors with pieces of any format and absorption, especially suitable for large formats. • Ceramic tiles placed on anhydrite screeds, after applying weberprim TP05, diluted 1: 5. • Industrial and commercial pavements subjected to intense traffic. • Ceramic installation on interior wooden walls and floors after application of weberprim FX15. • Suitable for terraces, balconies and outdoor pavements in general subject to permanent humidity and frost. • Suitable for permanent immersion and humid environments such as swimming pools, baths, shower trays, saunas, spas, tanks, cold rooms, etc. • Cladding on facades. • Laying of ceramic on elastic waterproofing (webertec hydrolastic type) with pieces of format up to 2,400 cm. Supports: • Cement-based screeds and self-leveling mortars. • Walls plastered with cement mortar and bastard mortar. • Concrete, precast concrete and foam concrete. • Plaster plasters, precast plaster and/or plaster panels. • Laminated plasterboard (plasterboard) waterproofed and non-waterproofed. • Fiber cement plates. • Pre-existing floor and wall tiles made of ceramic, terrazzo, natural stone, etc. • Anhydrite screeds • Radiant heating floors (cement-based or anhydrite). • Rigid cementitious waterproofing (type webertec imper F or webertec imper G) and flexible (type webertec imperflex). • Elastic waterproofing (webertec hydrolastic type). • Rigid cementitious waterproofing (type webertec imper F or webertec imper G) and flexible (type webertec imperflex). • Elastic waterproofing (webertec hydrolastic type). • Wooden supports after application of weberprim FX15 express. • Elastic waterproofing (webertec hydrolastic type) with pieces of format up to 2,400 cm. Technical Sheet: TO DOWNLOAD
-
Thixotropic adhesive reinforced with glass fibers and mixed cement and resin binders, flexible and highly defomable, with a long open time and zero slip, for laying all types of ceramic tiles, of any absorption and especially large-format. Suitable for very deformable substrates (wood, elastic waterproofing type webertec hydrolastic). Placements on interior and exterior walls and floors. Presentation: 25 Kg bags. Colors: White. Applications:- Interior coatings and interior and exterior flooring in residential, commercial, industrial and urban areas.
- Indoor flooring and cladding in residential areas such as kitchens, dining rooms, bathrooms, ...
- Suitable for terraces, balconies and outdoor pavements in general subjected to permanent humidity and frost.
- Suitable for permanent immersion and humid environments such as swimming pools, bathrooms, shower trays, saunas, spas, tanks, cold rooms, etc.
- Industrial and commercial flooring subjected to heavy traffic.
- Laying ceramic directly on existing ceramic tiles and flooring in residential, commercial and industrial areas.
- Placement of ceramic on interior walls and wooden floors after applying weberprim FX15 express.
- Radiant heating floors with pieces of any format and absorption, especially suitable for large formats.
- Cladding on high-rise facades, especially with large formats.
- Cement-based self-leveling screeds and mortars.
- Walls plastered with cement mortar and bastard mortar.
- Concrete, precast concrete and aerated concrete.
- Gypsum plasters, prefabricated gypsum and / or plaster panels.
- Sheets of laminated plaster (plasterboard) waterproofed and not waterproofed.
- Fiber cement plates.
- Large format ceramic brick.
- Pre-existing floors and coverings of ceramic, terrazzo, mosaics, natural stone, etc.
- Anhydrite screeds (with or without radiant heating), after treating the substrate with weberprim TP05, diluted 1: 5.
- Radiant heating floors (cement or anhydrite base).
- Rigid cementitious waterproofing (type webertec imper F or webertec imper G) and flexible (type webertec imperflex).
- Elastic waterproofing (type webertec hydrolastic).
- Wooden supports after application of weberprim FX15 express.
- Elastic waterproofing (type webertec hydrolastic) with pieces of format up to 2,400 cm.
-
Thixotropic adhesive reinforced with glass fibers and mixed cement and resin binders, flexible and highly defomable, with long open time and no slippage, for laying all kinds of ceramic tiles, of any absorption and especially of large format. Suitable for highly deformable supports (wood, elastic waterproofing type webertec hydrolastic). Placements on interior and exterior walls and pavements. Presentation: 25 Kg bags. Colors: White. Applications: - Interior cladding and interior and exterior paving in residential, commercial, industrial and urban areas. - Indoor flooring and cladding in residential areas such as kitchens, dining rooms, bathrooms, ... - Suitable for terraces, balconies and outdoor pavements in general subject to permanent humidity and frost. - Suitable for permanent immersion and wet environments such as swimming pools, baths, shower trays, saunas, spas, tanks, cold rooms, etc. - Industrial and commercial pavements subjected to intense traffic. - Laying ceramic directly on pre-existing ceramic coatings and pavements in residential, commercial and industrial areas. - Ceramic installation on interior wooden walls and floors after application of weberprim FX15 express. - Radiant heating floors with pieces of any format and absorption, especially suitable for large formats. - Cladding on facades at height, especially with a large format. Supports: - Self-leveling screeds and mortars on a cement basis. - Walls plastered with cement mortar and bastard mortar. - Concrete, precast concrete and foam concrete. - Plaster plasters, precast plaster and/or plaster panels. - Laminated gypsum boards (gypsum board) waterproofed and non-waterproofed. - Fiber cement plates. -Large format ceramic brick. - Pre-existing pavements and coatings of ceramic, terrazzo, mosaics, natural stone, etc. - Anhydrite screeds (with or without radiant heating), after treating the - substrate with weberprim TP05, diluted 1: 5. - Radiant heating floors (cement-based or anhydrite). - Rigid cementitious waterproofing (type webertec imper F or webertec imper G) and flexible (type webertec imperflex). -Elastic waterproofing (webertec hydrolastic type). -Wooden supports after application of weberprim FX15 express. - Elastic waterproofing (webertec hydrolastic type) with pieces of format up to 2,400 cm. Technical Sheet: TO DOWNLOAD
-
Rapid setting mixed bonding adhesive mortar, extended open time and reduced sag that allows quick commissioning of the laid ceramic. Laying of facades and pavements of large surfaces, etc., with ceramic, marble, natural stone or similar, small or large format, absorbent or non-absorbent. Outdoors and indoors. Presentation: 25 Kg bags. Colors: Gray and white. Applications:- Pavements with heavy traffic and large surfaces where quick commissioning is required.
- Placing ceramic directly on old ceramic.
- Laying of radiant heating pavements.
- Ceramic tile placement on balconies and terraces.
- Placement of ceramic in anhydrite screeds, previous application of weberprim TP05, diluted 1: 5.
- Suitable for immersion.
- Cement-based screeds and self-leveling mortars.
- Walls plastered with cement mortar and bastard mortar.
- Concrete.
- Radiant heating floors.
- Ancient pottery.
