-
Kit for waterproofing in areas subject to possible small movements and with risk of cracking before laying a ceramic coating, consisting of 25 kg. of powdered mortar and a bottle of 8.3 kg. of latex to be mixed. PRESENTATION: Component A 25kg bag. Colour: Gray powder. Component B 8.3 kg drum. Colour: White liquid. APPLICATIONS: • Waterproofing of balconies, terraces (even paved), roofs and, in general, absorbent and non-absorbent substrates, always being stable and consistent • Waterproofing of showers, bathtubs and swimming pools, before laying ceramic tiles • Flexible support coatings with small cracks in concrete and precast structures • Protection of concrete surfaces against the action of carbon dioxide, smog, chlorides, sulfates, etc. • Retaining wall waterproofing coatings • Waterproofing of water tanks (suitable for drinking water, ARPA cert. Under Ministerial Decree 174/2004), being necessary to wash with clean water after setting. Associated coatings: Mineral plasters, ceramics, paints and acrylic mortars • SUPPORTS • Smooth concrete, precast concrete elements, mortar and ceramic plasters Data sheet: Download -
Applications:- Adhesion promoter on smooth concrete in facades after application
- mineral coatings
- Adhesion bridge on ceramic and wooden floors in residential areas.
-
Applications:- Repair and sealing of pores, cavities and gravel nests on concrete and mortar support.
- Thin-film coating of vertical structural elements and horizontals such as floors, pillars and beams.
- Surface regularization of all types of concrete: shotcrete, formwork and concrete slabs.
- Edge repair work, joint reprofiling, etc.
- Repair and regularization of facades and walls in rehabilitation
- Suitable for both new construction and rehabilitation.
-
Supports: Any mortar from the weberpral, webercal or weberev range. o Webertherm base and webertherm base plus high performance mortar. o Concrete, lightened concrete or aerated concrete. o Paints and synthetic coatings or that Data sheet: Download -
Applications: • Highly decorative, finishing, ready-to-use thin-layer acrylic coating circular or linear trowel, it is suitable for exterior and interior and for walls and ceilings. Form part of the exclusive webertherm insulation and weberenova renovation systems. • Specially developed formula for extra protection against proliferation of microorganisms. • For other applications, consult our Technical Department. • Available in 2 granulometries: L: max 1.5 mm XL: max 2.5 mm Data sheet: Download -
Thick-layer lime plaster. Lime mineral mortar with hydraulic binders, designed for use as a plaster base for all types of two-layer solutions and especially suitable for lime-based two-layer solutions with finish coatings such as render or stucco. Presentation: 25 kg bags Colors: Gray and white Application: Lime mortar for thick layer rendering of facades, both in new construction and in rehabilitation. It is a good base for all types of two-layer solutions and is especially suitable for lime-based two-layer solutions (render and stucco) in: o exterior and interior, o walls and ceilings. For other applications, consult our Technical Department. Data sheets: Download -
Formwork fillings and structural anchors (85 Mpa) Compensated shrinkage fluid mortar, impervious to water, oils and greases, which achieves a compressive strength of 85 MPa after 28 days, specially designed for anchoring metallic elements on concrete, as well as anchoring precast concrete elements or filling of formwork, cracks and cavities inside concrete masses. Presentation: 25 Kg bags. Colors: Gray Application: • Reinforcement passivator in formwork and anchoring works. • Structural repair of formwork concrete. • Increase in section in structural repairs. • Backfilling and anchoring of heavy machinery on concrete surfaces. • Filling of formwork and reinforcement of structures. • Filling of cracks and voids inside concrete masses. • Anchoring of metallic elements on concrete: posts, bolts or pillars. • Anchors of precast concrete elements. • Filling by pouring, under support plates and distribution Data sheet: Download -
Formwork fillings and structural anchors (85 Mpa) Compensated shrinkage fluid mortar, impervious to water, oils and greases, which achieves a compressive strength of 85 MPa after 28 days, specially designed for anchoring metallic elements on concrete, as well as anchoring precast concrete elements or filling of formwork, cracks and cavities inside concrete masses. Presentation: 25 Kg bags. Colors: Gray Application: • Reinforcement passivator in formwork and anchoring works. • Structural repair of formwork concrete. • Increase in section in structural repairs. • Backfilling and anchoring of heavy machinery on concrete surfaces. • Filling of formwork and reinforcement of structures. • Filling of cracks and voids inside concrete masses. • Anchoring of metallic elements on concrete: posts, bolts or pillars. • Anchors of precast concrete elements. • Filling by pouring, under support plates and distribution Data sheet: Download -
Formwork fillings and structural anchors (60 MPa). Compensated shrinkage fluid mortar that achieves a compressive strength of 60 MPa at 28 days, specially designed for anchoring metallic elements on concrete, as well as anchoring precast concrete elements or filling of formwork, cracks and cavities inside concrete masses. Presentation: 25 Kg bags. Colors: Gray Applications: • Backfilling and anchoring of heavy machinery on concrete surfaces. • Filling of formwork and reinforcement of structures. • Filling of cracks and voids inside concrete masses. • Anchoring of metallic elements on concrete: posts, bolts or pillars. • Anchors of precast concrete elements. • Filling by pouring, under support plates and distribution. Data sheets: Download -
Quick self-leveling mortar for thicknesses from 1 to 10 mm
High performance self-leveling polymeric technical screed for smoothing and regularizing interior floors in a thin layer with thicknesses from 1 to 10 mm. Thanks to its self-leveling power, it allows to obtain surfaces with a high flatness and a very fine finish, ideal for laying light pavements, ceramic and technical floors with high productivity as it is suitable for being pumped. It allows a quick commissioning both for transit and for coating as it is fast setting and drying, in addition to minimizing the appearance of cracks due to shrinkage compared to a conventional self-leveling because it is compensated for shrinkage. Suitable for heating
radiant.Data sheet: TO DOWNLOAD
-
Quick self-leveling mortar for thicknesses from 3 to 10 cm. High performance self-leveling polymeric technical screed for smoothing and regularizing interior floors in thick layers from 3 to 10 cm thick. Thanks to its self-leveling power, it allows obtaining surfaces with a high level of flatness for laying light pavements, ceramics and technical floors with high productivity as it is suitable to be pumped. It allows a quick start-up both for transit and for coating as it is fast setting and drying, in addition to minimizing the appearance of shrinkage cracks compared to a conventional self-leveling as it is compensated for shrinkage. Suitable for radiant heating and as a floating screed. Data sheet: TO DOWNLOAD -
Fiber-reinforced industrial polymeric self-leveling mortar for thicknesses from 5 to 30 mm- Excellent resistance to flexotraction and abrasion.
- Quick commissioning for heavily trafficked floors.
- Compensated shrinkage and high crack-bridging capacity.
- Pumpable. High productivity ..
