- Waterproofing of roofs, decks, balconies and terraces with the Weberdry roof system.
- Waterproofing of wet areas (under tiles) in bathrooms, kitchens, etc...
- Waterproofing and protection of concrete constructions such as bridges, tunnels, etc…
-
Single-component polyurethane waterproofing membrane 100% solvent-based. Highly flexible and durable solvent-based 100% polyurethane waterproofing agent, specially designed for waterproofing and protecting against water infiltration on roofs, roofs, balconies and terraces, on almost all substrates. Data sheet: TO DOWNLOAD Presentation: 20 kg plastic drums Pallets of 24 drums (480 kg/pallet) Colors: Tile and gray. App: -
Single-component waterproofing membrane 100% water-based polyurethane. 100% solvent-based polyurethane waterproofing, highly flexible and durable, specially designed for waterproofing and protection against water seepage on roofs, decks, balconies and terraces, on almost all supports. Data sheet: TO DOWNLOAD Presentation: 20 Kg plastic drums Colors: Tile and gray. Applications:- Waterproofing of roofs, decks, balconies and terraces with the Weberdry cover system.
- Waterproofing of wet areas (under tile) in bathrooms, kitchens, etc.
- Waterproofing and protection of concrete constructions such as bridges, tunnels, etc.
-
Ready-to-use colored siloxane-based mortar (1.2 mm) Ready-to-use thin-film siloxane coating. Advance technology provides a degree of impermeability and unbeatable color stability. It has a maximum grain size of 1.2 mm. With a manual or machine-projected float finish, it is suitable for exteriors and interiors and for walls and ceilings. They are part of the exclusive Webertherm insulation and Weberenova renovation systems. Presentation: 25 Kg plastic drum Colors: Products with color gamut Data sheet: TO DOWNLOAD Primer: • Apply Webertene primer by roller or with a spray bottle as adsorption regulator. It is important that the primer is dry before applying Webertene advance M. This depends on the existing armospheric conditions, but as a general rule, drying is achieved within 24 hours. If it is used as a base mortar for the product Webertene base plus or webertherm flex B, it is not necessary to apply this primer. App: • Apply a Webertene advance M layer with the help of a metal trowel. The ready-to-use mortar is applied completely covering the surface with a thickness of approximately 1.5 mm. Medium: Concrete, cement mortar, lime mortar, paints, wood, synthetic, plaster, concrete block. -
Ready-to-use thin-film siloxane coating. Advance technology provides an unbeatable degree of waterproofing and color stability. It has a maximum grain size of 0.8 mm. With a manual or machine-projected float finish, it is suitable for exterior and interior and for walls and ceilings. They are part of the exclusive webertherm insulation and weberenova renovation systems. Presentation: 25 Kg plastic drum. Colors: Color gamut product Data sheet: TO DOWNLOAD -
Ready-to-use colored siloxane-based mortar (0.5 mm) Ready-to-use thin-film siloxane coating. Advance technology provides an unbeatable degree of waterproofing and color stability. It has a maximum grain size of 0.5 mm. With a manual or machine-projected floated finish, it is suitable for exteriors and interiors and for walls and ceilings. They are part of the exclusive webertherm insulation and weberenova renovation systems. Presentation: 25 Kg plastic drum. Colors: Color gamut product Data sheet: TO DOWNLOAD App: • Apply with the help of a metal trowel or webertene advance XS spray gun. The ready-to-use mortar is applied completely covering the surface with a thickness of approximately 0.8 mm. • In the event that decorative cuts are made, these will be done with adhesive tape that must be removed before the product hardens. The protection of these discontinuities in the webertene advance XS mortar must be carried out with the webertene advance PLUS siloxane paint of the chosen color before applying this last layer. The use of this very high-performance paint strengthens the protection of the facade at these points. Medium: Concrete, Cement mortar, Lime mortar, Paints, Plaster, Wood, Concrete block. -
R3 Concrete Repairer with excellent workability R3 structural repair mortar (UNE 1504-3) with very good workability, fine finish and corrosion inhibitor of reinforcements (UNE 1504-7), to protect, repair and finish with a single product . Presentation Sacks of 25Kg Colors Dark Gray Data sheet: TO DOWNLOAD App: • Reinforcement passivator in concrete repair work. • For the repair of concrete, mortar and stone, in small thicknesses. • Repair of floors, balconies, cantilevers ... • Layers of screed and / or leveling in walls. • On walls, ceilings and floors. • Indoors and outdoors. Supports: Cement-based substrates such as concrete, heavy duty cement mortars or standard concrete block. -
Multifunctional mortar with corrosion inhibitors for the structural repair of concrete, class R4. Repairing mortar with high mechanical performance classified as R4 (according to standard EN 1504). Multifunctional mortar 3 in 1, structurally repairs, passive the corrosion of the reinforcements and its workability and granulometry allows it to be used as an aesthetic finish repairer. Quick start-up mortar as it has a fast setting and is resistant to aggressive agents, such as sulfates, seawater and CO2. Presentation: 25Kg bags Colors: Dark gray Data sheet: TO DOWNLOAD App: • Repair of concrete degraded by the corrosion of the reinforcements or carbonation. • Repair of pillars, columns, girders, balconies, cantilevers and retaining walls. • Repair of concrete pavements. • On walls, ceilings and floors. • In exposed or buried concrete. • Indoors and outdoors. • Meets the requirements of class R4 of UNE-EN 1504-3. Supports: Cement-based substrates, such as concrete, heavy duty cement mortars, or standard concrete block. -
Structural concrete repairer for large thicknesses, class R4 with reinforcement corrosion inhibiting properties. It is a one-component mortar, with high mechanical performance and especially suitable for structural concrete repairs. It is a product formulated based on cement, synthetic resins, silica fume and reinforced with glass fibers. Presentation: 25 Kg bags Colors: Dark gray Data sheet: TO DOWNLOAD App: • Repair of concrete degraded by the corrosion of the reinforcements or carbonation. • Repair of pillars, columns, girders, balconies, cantilevers and retaining walls. • Repair of concrete pavements. • On walls, ceilings and floors. • In exposed or buried concrete. • Indoors and outdoors. • Meets the requirements of class R4 of UNE-EN 1504-3. Supports: Cement-based substrates, such as concrete, heavy duty cement mortars, or standard concrete block. -
Polymerization exothermic reaction hardening vinyl ester epoxy resin for high strength anchors with threaded rods or rebar, specially designed to support very heavy loads. Presentation: Vending box of 12 cartridges (300ml cartridges) Colour: Gray Data sheet: TO DOWNLOAD Applications: • High strength anchors with threaded rods or cross bars • Walls, floors and ceilings • Interior and exterior Supports: Concrete and cement mortar. -
Elastic band for the waterproofing of structural joints, as well as for the reinforcement and waterproofing of meetings between horizontal and vertical surfaces. Presentation: -Box of 6 Rolls -Rolls of 10 meters in length -1 pallet of 84 boxes. Data sheet: TO DOWNLOAD Supports: weber.tec imperflex waterproofing system. -
Kit for waterproofing in areas subject to possible small movements and with risk of cracking before laying a ceramic coating, consisting of 25 kg. of powdered mortar and a bottle of 8.3 kg. of latex to be mixed. Presentation: Component A 25 kg bag. Color: Gray powder. Component B 8.3 kg drum. Color: White liquid. Data sheet: TO DOWNLOAD Applications: • Waterproofing of balconies, terraces (even paved), roofs and, in general, absorbent and non-absorbent substrates, always being stable and consistent. • Waterproofing of showers, bathtubs and swimming pools, before laying ceramic tiles. with small cracks in concrete and precast structures • Protection of concrete surfaces against the action of carbon dioxide, smog, chlorides, sulfates, etc. • Retaining wall waterproofing coatings. • Waterproofing of water tanks (suitable for drinking water, ARPA cert. Under Ministerial Decree 174/2004), being necessary to wash with clean water after setting. Associated coatings: Mineral plasters, ceramics, paints and acrylic mortars. SUPPORTS: Smooth concrete, precast concrete elements, mortar and ceramic plasters. -
Mineral mortar specially designed for making thin-layer waterproofing plasters on smooth surfaces, on floors, walls or ceilings of buried constructions such as water tanks, ponds, swimming pools, basements, parking lots, elevator shafts, tunnels, foundations, as well as concrete retaining walls. Presentation: 25 Kg bags. Colors: White and grey. Data sheet: TO DOWNLOAD Applications: 1. Waterproofing of buried constructions such as: tanks, ponds, swimming pools, basements, parking lots, elevator shafts, tunnels, foundations, among others. 2. In concrete retaining walls. 3. On floors, walls and ceilings. Supports: 1. Mineral plasters, ceramics, paint and acrylic mortars. 2. Smooth concrete supports. 3. Precast concrete elements. 4. Plasters (pañete) of mortars rich in cement. -
Waterway shutter mortar. One-component, instant-setting, seawater-resistant mortar for plugging small waterways or leaks through cracks or breaks for use both indoors and outdoors. Presentation: 5 Kg plastic drum Colors: Cement gray. Data sheet: TO DOWNLOAD App: • Instantaneous plugging of filtration and waterways, through cracks or breaks. • Floors, walls and ceilings, both indoors and outdoors. • Hydraulic works, galleries, tunnels, ditches, parking lots. • Buried or elevated works. • Applicable to pressure and back pressure of water. Supports: Concrete, solid concrete block, solid ceramic brick and cement-rich mortars. -
Reinforcement geotextile for waterproofing membranes. Polyester technical geotextile for the reinforcement of liquid waterproofing membranes in singular points sensitive to the waterproofing cracking, such as half shells, encounters between different planes, drains, chimneys, pipes and watertight sealing of structural joints and expansion. Presentation: Rolls 100 m long and 1 m wide. Data sheet: TO DOWNLOAD App: • Reinforcement fabric in combination with Weberdry polyurethane liquid membranes. • Treatment of singular points such as half pipes, drains, chimneys, pipes, etc. • Watertight sealing of joints with Weberdry waterproofing membranes on the entire surface to be waterproofed. Medium: In combination with Weberdry liquid polyurethane membrane. -
Kit for waterproofing in areas subject to possible small movements and with risk of cracking before laying a ceramic coating, consisting of 25 kg. of powdered mortar and a bottle of 8.3 kg. of latex to be mixed.PRESENTATION:
Component A 25 kg bag. Color: Gray powder. Component B 8.3 kg drum. Color: White liquid.APPLICATIONS:
- Waterproofing of balconies, terraces (even paved), roofs and, in general, absorbent and non-absorbent substrates, always being stable and consistent
- Waterproofing of showers, bathtubs and swimming pools, before laying ceramic tiles
- Flexible support coatings with small cracks in concrete and precast structures
- Protection of concrete surfaces against the action of carbon dioxide, smog, chlorides, sulfates, etc.
- Retaining wall waterproofing coatings
- Waterproofing of water tanks (suitable for drinking water, ARPA cert. By virtue of Ministerial Decree 174/2004), being necessary to wash with clean water after setting. Associated coatings: Mineral plasters, ceramics, paints and acrylic mortars
- SUPPORTS
- Smooth concrete, precast concrete elements, mortar and ceramic plasters
-
Fiberglass mesh with antialkaline surface treatment for reinforcing thin-film coatings in webertherm exterior thermal insulation systems, with a density of 155 gr / m2 and a mesh opening of 3.5 x 3.8 mm. Presentation: 55 m2 rolls. Webertherm 160 mesh is a fiberglass mesh combined with specially designed anti-alkali surface treatments, and usable in a wide range of applications. Weber.therm base regularizing mortar reinforcement in weber.therm insulation systems.- High mechanical resistance
- Excellent dimensional stability
- Great deformability
- Excellent tensile and elongation resistance
- Anti-alkali treatment
- Quick and easy installation
- Substrates: Lime mortar, Cement mortar
-
App:- Adhesion promoter on smooth concrete in facades after application
- mineral coatings
- Adhesion bridge on ceramic and wooden floors in residential areas.
-
Applications:- Repair and sealing of pores, cavities and gravel nests on concrete and mortar support.
- Thin-layer cladding of vertical and horizontal structural elements such as floors, columns and beams.
- Surface regularization of all types of concrete: shotcrete, formwork and concrete slabs.
- Edge repair work, joint reprofiling, etc.
- Repair and regularization of facades and walls in rehabilitation
- Suitable for both new construction and rehabilitation.
-
Supports: Any mortar from the weberpral, webercal or weberev range. o Webertherm base and webertherm base plus high performance mortar. o Concrete, lightened concrete or aerated concrete. o Paints and synthetic coatings o Plaster Technical Data: Download -
Applications: • Highly decorative ready-to-use thin-layer acrylic coating, with a circular or linear floated finish, is suitable for exterior and interior, and for walls and ceilings. They are part of the exclusive webertherm insulation and weberenova renovation systems. • Formula specially developed to obtain extra protection against the proliferation of microorganisms. • For other applications, consult our Technical Department. • Available in 2 granulometries: L: max 1.5 mm XL: max 2.5 mm Technical Data: Download -
Thick layer lime plaster. Lime mineral mortar with hydraulic binders, designed for use as a plaster base for all types of two-layer solutions and especially suitable for lime-based two-layer solutions with finish coatings such as render or stucco. Presentation: 25 kg bags Colors: Gray and white App: Lime mortar for thick layer rendering of facades, both in new construction and in rehabilitation.- It is a good base for all types of two-layer solutions and is especially suitable for lime-based two-layer solutions (plasters and stucco) in: o exterior and interior, o walls and ceilings.
- For other applications, consult our Technical Department.
-
Plastering and assembly of traditional masonry walls. Ready-to-use dry mortar type M-7.5, indicated both for the assembly of all types of ceramic and concrete block walls, as well as for traditional interior or exterior plastering. Presentation: 25 Kg bags. Colors: White and grey. App:- Dry mortar type M-7.5, ready to use, for assembly and assembly of all types of ceramic and concrete blocks.
- Suitable for traditional indoor and outdoor plastering.
- For other applications, consult our Technical Department.
-
Form fillings and structural anchors (85 Mpa) Compensated shrinkage fluid mortar, impervious to water, oils and greases, which reaches a compressive strength of 85 MPa after 28 days, specially designed for anchoring metallic elements on concrete, as well as anchoring precast concrete elements. or filling of formwork, cracks and cavities inside concrete masses. Presentation: 25 Kg bags. Colors: Gray Application:- Reinforcement passivator in formwork and anchoring works.
- Structural repair of formwork concrete.
- Increase in section in structural repairs.
- Backfilling and anchoring of heavy machinery on concrete surfaces.
- Formwork filling and structure reinforcement.
- Filling of cracks and voids inside concrete masses.
- Anchoring of metallic elements on concrete: posts, bolts or pillars.
- Anchors of precast concrete elements.
- Filling by pouring, under support plates and distribution
-
Formwork fillings and structural anchors (60 MPa). Compensated shrinkage fluid mortar that achieves a compressive strength of 60 MPa after 28 days, specially designed for anchoring metallic elements on concrete, as well as anchoring precast concrete elements or filling of formwork, cracks and cavities inside concrete masses. Presentation: 25 kg bags. Colors: Gray Applications:- Backfilling and anchoring of heavy machinery on concrete surfaces.
- Formwork filling and structure reinforcement.
- Filling of cracks and voids inside concrete masses.
- Anchoring of metallic elements on concrete: posts, bolts or pillars.
- Anchors of precast concrete elements.
- Filling by pouring, under support plates and distribution.
-
Quick self-leveling mortar for thicknesses from 1 to 10 mm High-performance self-leveling polymeric technical screed for smoothing and regularizing interior floors in a thin layer with thicknesses of 1 to 10 mm. Thanks to its self-leveling power, it allows to obtain surfaces with a high flatness and a very fine finish, ideal for laying light pavements, ceramic and technical floors with high productivity as it is suitable for being pumped. It allows rapid commissioning both for transit and for coating as it is fast setting and drying, in addition to minimizing the appearance of shrinkage cracks compared to conventional self-leveling as it is compensated for shrinkage. Suitable for radiant heating. Data sheet: TO DOWNLOAD -
Quick self-leveling mortar for thicknesses from 3 to 10 cm. High performance self-leveling polymeric technical screed for smoothing and regularizing interior floors in thick layers from 3 to 10 cm thick. Thanks to its self-leveling power, it allows to obtain surfaces with a high flatness for laying light pavements, ceramics and technical floors with high productivity as it is suitable to be pumped. It allows rapid commissioning both for transit and for coating as it is fast setting and drying, in addition to minimizing the appearance of shrinkage cracks compared to conventional self-leveling as it is compensated for shrinkage. Suitable for radiant heating and as a floating screed. Data sheet: TO DOWNLOAD -
Light renovation mortar for large screeds- 40% lighter than conventional concrete
- High mechanical resistance (25 MPa)
- Quick and easy execution
- Thicknesses from 30 mm
- Suitable for large thicknesses.
-
Fiber-reinforced industrial polymeric self-leveling mortar for thicknesses from 5 to 30 mm- Excellent resistance to flexotraction and abrasion.
- Quick commissioning for floors with heavy traffic.
- Compensated shrinkage and high crack-bridging capacity.
- Pumpable. High productivity ..
-
Multipurpose concentrated latex. Liquid additive to increase adhesion and flexibility, as well as the surface hardness of cementitious products. Presentation: 10 kg drum - 400 kg pallet (40 units) Data sheet: TO DOWNLOAD Applications:- Additivation of glue mortars to increase their adherence and flexibility in extreme situations.
- Additivation of grouting mortars in thin-layer repairs.
- Additivation of monolayer mortars if applied on weak substrates.
- Increase the adhesion of cement grouts.
-
Fast and very elastic polymer adhesive, for gluing all kinds of elements such as mirrors, mailboxes, parquet baseboards, etc. on all types of substrates, both indoors and outdoors, and resistant to temperatures between -40 ºC and +90 ºC. Presentation: Boxes of 12 cartridges of 300 mL, pallets of 120 boxes Colors: White Data sheet: TO DOWNLOAD Applications:- Fast bonding of all types of materials (except polypropylene plastics and bituminous products): mirrors, mailboxes, parquet baseboards, etc ... both indoors and outdoors.
- Both in industry and construction.
-
Expansive polyurethane foam for filling and sealing gaps or holes in walls and ceilings in contact with the outside and for treating thermal bridges, as well as for spot gluing EPS tiles and plates. Presentation: Box of 12 sprays of 750 ml for spray application. Colour: Yellow Data sheet: TO DOWNLOAD Applications:- Sealing of gaps, holes in walls and ceilings with the exterior and thermal bridges.
- Door and window assemblies.
- Acoustic screen and silencer layer applications.
- Optimization of insulation in refrigeration.
- Spot gluing of EPS tiles and plates.
- High adhesion on all types of substrates, except PE and PP.
-
Polyurethane adhesive putty for sealing all types of joints and fissures (expansion joints, structural joints, joints between materials, among others). Multipurpose elastic bonding of materials such as partitions, partitions, fiber cement or melanin plates, tiles, wood, ceramics, baseboards, etc. Presentation: 600 ml sausage and 300 ml cartridges. Colors: White, Gray, Brown and Black. Data sheet: TO DOWNLOAD Applications:- Sealing of all types of joints and fissures such as expansion joints, structural joints, joints between materials, etc.
- Multipurpose elastic bonding of materials such as partitions, partitions, fiber cement or melanin plates, wooden tiles, ceramics, baseboards, etc.
- Joint sealing of precast concrete elements
- High adhesion on all types of supports.
-
Polyester technical geotextile for the reinforcement of liquid waterproofing membranes in singular points sensitive to the waterproofing cracking, such as half shells, encounters between different planes, drains, chimneys, pipes and watertight sealing of structural joints and expansion. Presentation: 100M2 roll Data sheet: DOWNLOAD Applications:- Reinforcing fabric in combination with liquid polyurethane membranes weberdry.
- Treatment of singular points such as half reeds, drains, chimneys, pipes, etc.
- Watertight sealing of structural and expansion joints.
- In combination with liquid polyurethane membranes Weberdry.
-
Hybrid water-based polyurethane waterproofing membrane. Product for waterproofing roofs, decks, balconies and terraces in a durable and simple way. Maximum efficiency in waterproofing wet areas (under tile) in bathrooms and kitchens, as well as in protecting against moisture in concrete constructions such as bridges, tunnels, etc. Presentation: 25Kg Plastic Drums. Colors: White, tile and gray. Data sheet: TO DOWNLOAD Applications:- Roofs, balconies, decks and terraces.
- Wet areas (under tile) in bathrooms and kitchens.
- In concrete constructions such as bridges, tunnels, etc.
- All types of supports, such as ceramic, mortar, concrete, asphalt fabric, metal supports, among others.
- Lime mortar
- Paints
- Ceramics
-
One-component flexible mortar for waterproofing in areas subject to possible small movements and with risk of cracking such as terraces, balconies, roofs and roofs, before laying a ceramic coating. Presentation: 15 Kg bags. Colors: Gray One-component flexible waterproofing mortar for:- Rehabilitation and waterproofing of terraces and balconies and in general, outdoor surfaces exposed to significant thermal changes such as cantilevers for terraces, roofs and cornices.
- Waterproofing of concrete tanks for drinking water.
- In bathrooms, showers and swimming pools prior to the placement of ceramic tiles.
- In cracked walls or that can be subjected to small movements.
- Smooth concrete.
- Precast concrete elements.
- Plasters (pañete) of mortar and ceramic.
-
Mineral mortar specially designed for the realization of regularization and waterproofing plasters in thick layers on surfaces that require a greater application thickness, on floors, walls or ceilings of buried constructions such as water tanks, ponds, swimming pools, basements, parking lots, pits. elevator, tunnels, foundations, as well as concrete retaining walls. Presentation: 25 Kg bags. Colour: Gray Data sheet: Unload Applications:- Waterproofing of buried constructions such as: tanks, ponds, swimming pools, basements, parking lots, elevator shafts, tunnels, foundations, among others.
- In concrete retaining walls.
- On floors, walls and ceilings.
- Concrete.
- Brick
- Concrete blocks.
- Cement-rich mortar plasters (pañete).