Shop

Rapid-setting mixed-bond glue mortar, which enables the quick installation of the installed ceramic. Thanks to its innovative technology, it allows rapid setting even at low temperatures. Laying on interior floors and walls and exterior floors with ceramic, porcelain stoneware, marble, natural stone or similar, of any format, absorbent or non-absorbent. Presentation: 25 Kg bags. Colors: Gray and White. Applications: - Heavy traffic pavements and large surfaces where rapid commissioning is required. - Placing ceramic directly on old ceramic. - Laying ceramic on balconies and terraces. - Suitable in immersion. Supports: Cement-based screeds and self-leveling mortars. - Walls plastered with cement mortar and bastard mortar. - Concrete. -Ancient pottery. Technical Sheet: Download

Thixotropic adhesive reinforced with glass fibers and mixed cement and resin binders, flexible and deformable, with long open time and no slip, for laying all kinds of ceramic tiles of any absorption. Placements on interior and exterior walls and pavements. Presentation: 25 Kg bags. Colors: Gray and White. Applications: - Suitable for laying all kinds of ceramic tiles of any degree of absorption such as porcelain stoneware, rustic stoneware, glass and ceramic mosaic, fired clay tiles, Catalan tile, tile, etc. - Suitable for laying natural stone (marble, granite, etc.) and artificial recomposed materials (terrazzo-type cement conglomerate). - Suitable for laying artificial recomposed materials (resin-based agglomerates) that are not subject to deformation. - Suitable for pieces reinforced with fiber mesh in pavement and interior wall of up to 70cm in length from the longest side of the tile. Supports: - Self-leveling screeds and mortars on a cement basis. - Walls plastered with cement mortar and bastard mortar. - Concrete, precast concrete and foam concrete. - Lime, plaster, precast plaster and/or plaster panels. - Laminated gypsum boards (gypsum board) waterproofed and non-waterproofed. - Fiber cement plates. -Large format ceramic brick. - Pre-existing pavements and coatings of ceramic, terrazzo, mosaics, natural stone, etc. - Anhydrite screeds (with or without underfloor heating), after treating the substrate with weberprim TP05, diluted 1: 5. - Radiant heating floors (cement-based or anhydrite). Rigid cementitious waterproofing (type webertec imper F or webertec imper G) and flexible (type webertec imperflex). - Wooden supports after application of weberprim FX15 express. -Elastic waterproofing (webertec hydrolastic type) with pieces of format up to 30x30cm. Technical Sheet: TO DOWNLOAD

One-component, fast-setting and highly deformable adhesive (C2FTES2) formulated with mixed cement-resin binders that allows the quick commissioning of the installed ceramic. Suitable for laying all kinds of ceramic tiles, marble, natural stone or the like of any absorption and format, and especially large format. Suitable for deformable supports or subject to movement or vibrations (wood, elastic waterproofing type webertec hydrolastic). Placements in interior and exterior pavements and coatings. Suitable for facades. Presentation: 25 Kg bags. Colors: Gray. Applications: • Interior and exterior coatings and pavements in residential, commercial, industrial and urban areas. • Indoor flooring and cladding in residential areas such as kitchens, dining rooms, bathrooms, ... • Indoor ceramic laying directly on pre-existing ceramic flooring or cladding in residential, commercial and industrial areas • Heavy traffic pavements and large surfaces where rapid commissioning is required. • Laying of radiant heating floors with pieces of any format and absorption, especially suitable for large formats. • Ceramic tiles placed on anhydrite screeds, after applying weberprim TP05, diluted 1: 5. • Industrial and commercial pavements subjected to intense traffic. • Ceramic installation on interior wooden walls and floors after application of weberprim FX15. • Suitable for terraces, balconies and outdoor pavements in general subject to permanent humidity and frost. • Suitable for permanent immersion and humid environments such as swimming pools, baths, shower trays, saunas, spas, tanks, cold rooms, etc. • Cladding on facades. • Laying of ceramic on elastic waterproofing (webertec hydrolastic type) with pieces of format up to 2,400 cm. Supports: • Cement-based screeds and self-leveling mortars. • Walls plastered with cement mortar and bastard mortar. • Concrete, precast concrete and foam concrete. • Plaster plasters, precast plaster and/or plaster panels. • Laminated plasterboard (plasterboard) waterproofed and non-waterproofed. • Fiber cement plates. • Pre-existing floor and wall tiles made of ceramic, terrazzo, natural stone, etc. • Anhydrite screeds • Radiant heating floors (cement-based or anhydrite). • Rigid cementitious waterproofing (type webertec imper F or webertec imper G) and flexible (type webertec imperflex). • Elastic waterproofing (webertec hydrolastic type). • Rigid cementitious waterproofing (type webertec imper F or webertec imper G) and flexible (type webertec imperflex). • Elastic waterproofing (webertec hydrolastic type). • Wooden supports after application of weberprim FX15 express. • Elastic waterproofing (webertec hydrolastic type) with pieces of format up to 2,400 cm. Technical Sheet: TO DOWNLOAD