Webercol

HomeWebercol
  • Lime colored and waterproofed mineral mortar for plasters, especially indicated for smooth or floated finishes and ideal for reproducing the more traditional textures of lime coatings: engravings, hammers, chairs, sgraffito, etc. Presentation: 25 Kg bags. Colors: 12 colors available in 4 textures (see catalog). Data sheet: TO DOWNLOAD Applications:
    • Colored lime mineral mortar for plastering:
      • Both in new construction and rehabilitation
      • Interior and exterior.
      • Walls and ceilings.
    • Especially suitable for:
      • Obtain smooth and floated textures.
      • Reproduce traditional lime textures: engravings, martinillas, chairs, sgraffito.
    • For other applications, consult our Technical Department.
    Supports:
    • Brick walls.
    • Thermoclay block.
    • Concrete block and mortar plasters type weber.cal basic.
  • Adhesive mortar suitable for thick layer laying of medium / high porosity tiles and stoneware, both on floors and interior cladding. Without plastering the support, without sagging and up to 30mm thick. Presentation: 25 Kg bags. Colors: Gray and white. Applications:
    • Interior coatings.
    • Indoor flooring.
    Supports:
    • Cement-based floors. · Walls plastered with sand mortar, cement and ceramic brick.
    Data sheet:  TO DOWNLOAD
  • High-performance adhesive with mixed cement and resin binders, long open time and slip resistant, suitable for laying ceramic, marble, mosaics, glass paste, etc., on exterior and interior floors and interior wall tiles. Suitable for placement in swimming pools.

    Presentation: 25 Kg bags.

    Colors: Gray and white.

    Data sheet: TO DOWNLOAD

    Applications:

    Interior coatings and interior and exterior flooring, both in residential areas (kitchens, dining rooms, bathrooms) and urban areas.

    • Suitable for terraces, balconies and outdoor pavements in general subjected to permanent humidity and frost.
    • Suitable for permanent immersion and humid environments such as swimming pools, bathrooms, shower trays, saunas, spas, tanks, cold rooms, etc.

    Supports:

    • Cement-based screeds and self-leveling mortars.
    • Walls plastered with cement mortar and bastard mortar.
    • Sheets of laminated plaster (plasterboard) waterproofed and not waterproofed.
    • Fiber cement boards indoors.
    • Rigid cementitious waterproofing (type weber.tec imper F or weber.tec imper G) and flexible (type weber.tec imperflex).
  • Highly flexible and adherent polyurethane-epoxy-based adhesive paste for laying all types of ceramic tiles of any format and absorption on interior and exterior walls and floors. Especially suitable for supports subjected to strong vibrations or deformations such as wood, metal and synthetic materials such as vinyl, among others. Presentation: 10 Kg pre-dosed bucket (Component A and B). Colors: White. Applications: • Interior coatings and interior and exterior flooring in residential, commercial, industrial and urban areas. • Indoor flooring and cladding in residential areas such as kitchens, dining rooms, bathrooms. • Suitable for terraces, balconies and outdoor pavements in general subjected to humidity and permanent frost. • Coatings on facades. • Laying ceramic on elastic waterproofing (webertec hydrolastic type). • Placements on metal supports. • Laying of synthetic materials not compatible with cementitious mortars. • Suitable for humid environments such as bathrooms, shower trays, saunas, spas, tanks, cold rooms, etc. • High demand industrial and commercial flooring subjected to heavy traffic and / or constant vibrations. Supports: • Cement-based screeds and self-leveling mortars. • Walls plastered with cement mortar and bastard mortar. • Concrete, precast concrete and aerated concrete. • Fiber cement plates. • Pre-existing ceramic, terrazzo, natural stone flooring and wall tiles, etc. • Gypsum plasters, prefabricated gypsum and / or plaster panels. • Waterproof and non-waterproofed laminated plasterboard (plasterboard). • Anhydrite soleras. • Rigid cementitious waterproofing and over elastic waterproofing • Polyurethane or epoxy flooring. • Supports subject to movements or vibrations such as wood, parquet flooring, chipboard panels. • Old PVC, linoleum and rigid vinyl flooring. • Polyester, metal and paint supports in good condition. Data sheet: TO DOWNLOAD
  • Adhesive paste for laying ceramic tiles on interior walls, especially on deformable substrates such as plasterboard and on old tiles. Presentation: 25 Kg bucket. Colors: White bone. Applications: • Ceramic coatings on interior walls, especially on deformable supports and old tiles. Supports: • Old tiling. • Deformable supports (plasterboard). • Plaster plasters. • Painted surfaces. Data sheet: TO DOWNLOAD
  • Flexible adhesive with mixed cement and resin binders, long open time and slip resistant, for laying all types of ceramic tiles and especially porcelain tiles, of any format and absorption. Placements on interior and exterior walls and floors. Presentation: 25 Kg bags. Colors: Gray and white. Applications: 1. Placement of pieces of any format and absorption (not susceptible to stains due to water absorption), especially porcelain stoneware. 2. On exterior and interior floors and interior cladding. 3. Laying porcelain stoneware in swimming pools, on plaster supports and in situations with high use demands. Supports: 1. Concrete and cement-based floors. 2. Walls: plastered with cementitious mortar, concrete, plaster, prefabricated plaster panels and plasterboard plates. Data sheet: TO DOWNLOAD
  • Thixotropic adhesive reinforced with glass fibers and mixed cement and resin binders, flexible, with a long open time and zero slip, for laying all types of ceramic tiles and especially porcelain stoneware, of any format and absorption. Placements on walls, interior and exterior floors. Presentation: 25 Kg bags. Colors: Gray and white. Applications: 1. Placement of pieces of any format and absorption, especially porcelain stoneware. 2. On exterior and interior floors and interior cladding. 3. For Pools (suitable for immersion). 4. Cladding on facades up to 3M high. 5. Radiant heating with small-format pieces. Supports: 1. Concrete and cement-based floors. 2. Walls: plastered with cementitious mortar, concrete, plaster, prefabricated plaster panels and plasterboard. Data sheet: TO DOWNLOAD
  • Rapid setting mixed bonding adhesive mortar, which allows the rapid commissioning of the laid ceramic. Thanks to its innovative technology, it allows rapid setting even at low temperatures. Installation on interior floors and walls and exterior floors with ceramic, porcelain stoneware, marble, natural stone or similar, of any format, absorbent or non-absorbent. Presentation: 25 Kg bags. Colors: Gray and white. Applications:
    1. Pavements with heavy traffic and large surfaces where quick commissioning is required.
    2. Laying ceramic directly on old ceramic.
    3. Ceramic tile placement on balconies and terraces.
    4. Suitable for immersion.
    Supports:
    1. Cement-based screeds and self-leveling mortars.
    2. Walls plastered with cement mortar and bastard mortar.
    3. Concrete.
    4. Ancient pottery.
    Data sheet: Download
  • Flexible and deformable adhesive with mixed cement and resin binders, long open time and slip resistant, for laying all types of ceramic tiles, of any format and absorption. Placements on interior and exterior walls and floors. Presentation: 25 Kg bags. Colors: Gray and white. Applications:
    1. Cladding of facades in height and pavement of intense traffic (not susceptible to stains due to water absorption).
    2. For pieces of any shape and absorption.
    3. Demanding interior and exterior flooring and cladding applications.
    4. Radiant heating floors.
    5. Suitable for swimming pools (suitable for immersion).
    Supports: Cementitious mortar, concrete, old ceramics, plaster, precast plaster, plasterboard plates and ahnidrite screeds. Data sheet: TO DOWNLOAD  
  • Thixotropic adhesive reinforced with glass fibers and mixed cement and resin binders, flexible and deformable, with a long open time and zero slip, for laying all types of ceramic tiles of any absorption. Placements on interior and exterior walls and floors. Presentation: 25 Kg bags. Colors: Gray and white. Applications:
    • Suitable for laying all types of ceramic tiles of any degree of absorption such as porcelain stoneware, rustic stoneware, vitreous and ceramic mosaic, fired earth tiles, Catalan tile, tile, etc.
    • Suitable for laying natural stone (marble, granite, etc.) and artificial composite materials (terrazzo-type cement conglomerate).
    • Suitable for laying artificial composite materials (resin-based agglomerates) that are not subject to deformation.
    • Suitable for pieces reinforced with fiber mesh in pavement and interior wall up to 70cm in length on the longest side of the tile.
    Supports:
    • Cement-based self-leveling screeds and mortars.
    • Walls plastered with cement mortar and bastard mortar.
    • Concrete, precast concrete and aerated concrete.
    • Lime plasters, plaster, prefabricated gypsum and / or plaster panels.
    • Sheets of laminated plaster (plasterboard) waterproofed and not waterproofed.
    • Fiber cement plates.
    • Large format ceramic brick.
    • Pre-existing floors and coverings of ceramic, terrazzo, mosaics, natural stone, etc.
    • Anhydrite screeds (with or without radiant heating), after treating the substrate with weberprim TP05, diluted 1: 5.
    • Radiant heating floors (cement or anhydrite base).
    • Rigid cementitious waterproofing (type webertec imper F or webertec imper G) and flexible (type webertec imperflex).
    • Wooden supports after application of weberprim FX15 express.
    • Elastic waterproofing (type webertec hydrolastic) with pieces of format up to 30x30cm.
    Data sheet: TO DOWNLOAD
  • Rapid setting mixed bonding adhesive mortar, extended open time and reduced sag that allows quick commissioning of the laid ceramic. Laying of facades and pavements of large surfaces, etc., with ceramic, marble, natural stone or similar, small or large format, absorbent or non-absorbent. Outdoors and indoors. Presentation: 25 Kg bags. Colors: Gray and white. Applications:
    • Pavements with heavy traffic and large surfaces where quick commissioning is required.
    • Placing ceramic directly on old ceramic.
    • Laying of radiant heating pavements.
    • Ceramic tile placement on balconies and terraces.
    • Placement of ceramic in anhydrite screeds, previous application of weberprim TP05, diluted 1: 5.
    • Suitable for immersion.
    Supports:
    • Cement-based screeds and self-leveling mortars.
    • Walls plastered with cement mortar and bastard mortar.
    • Concrete.
    • Radiant heating floors.
    • Ancient pottery.
    Data sheet: TO DOWNLOAD
  • One-component, fast-setting and highly deformable adhesive (C2FTES2) formulated with mixed cement-resin binders that allows the rapid commissioning of the placed ceramic. Suitable for laying all types of ceramic, marble, natural stone or similar tiles of any absorption and format, especially large ones. Suitable for supports that are deformable or subject to movements or vibrations (wood, webertec hydrolastic type elastic waterproofing). Placements on interior and exterior flooring and cladding. Suitable for facades. Presentation: 25 Kg bags. Colors: Gray. Applications: • Interior and exterior coatings and flooring in residential, commercial, industrial and urban areas. • Indoor flooring and cladding in residential areas such as kitchens, dining rooms, bathrooms, ... • Indoor ceramic tile laying directly on existing ceramic flooring or cladding in residential, commercial and industrial areas • High traffic flooring and large surfaces where it is need quick commissioning. • Laying radiant heating floors with pieces of any format and absorption, especially suitable for large formats. • Placement of ceramic in anhydrite screeds, after applying weberprim TP05, diluted 1: 5. • Industrial and commercial flooring subjected to heavy traffic. • Placement of ceramic on interior wooden walls and floors after applying weberprim FX15. • Suitable for terraces, balconies and outdoor pavements in general subjected to permanent humidity and frost. • Suitable for permanent immersion and humid environments such as swimming pools, bathrooms, shower trays, saunas, spas, tanks, cold rooms, etc. • Coatings on facades. • Laying of ceramic on elastic waterproofing (webertec hydrolastic type) with pieces of format up to 2,400 cm. Supports: • Cement-based screeds and self-leveling mortars. • Walls plastered with cement mortar and bastard mortar. • Concrete, precast concrete and aerated concrete. • Gypsum plasters, prefabricated gypsum and / or plaster panels. • Waterproof and non-waterproofed laminated plasterboard (plasterboard). • Fiber cement plates. • Pre-existing ceramic, terrazzo, natural stone flooring and wall tiles, etc. • Anhydrite floors • Radiant heating floors (cement or anhydrite base). • Rigid cementitious waterproofing (type webertec imper F or webertec imper G) and flexible (type webertec imperflex). • Elastic waterproofing (webertec hydrolastic type). • Rigid cementitious waterproofing (type webertec imper F or webertec imper G) and flexible (type webertec imperflex). • Elastic waterproofing (webertec hydrolastic type). • Wooden substrates after applying weberprim FX15 express. • Elastic waterproofing (webertec hydrolastic type) with pieces of format up to 2,400 cm. Data sheet: TO DOWNLOAD

Title

ADC Del Caribe

ACD Del Caribe is a specialized distributor of systems, products and additives for the construction sector. We seek to be the perfect synergy between world leading manufacturers and our clients' projects throughout the Caribbean region.

CONTACTS

Go to Top