Shop

Flexible Webercal
Colored lime stucco in a thin deformable layer, specially designed for use as a coating on external thermal insulation systems webertherm.Presentation: 16 Kg containers.Colors: 12 colors available (see color chart).Data sheet: TO DOWNLOAD Applications:High performance thin-film deformable mineral stucco for waterproofing, decoration and lasting protection of:
Interior and exterior
Walls and ceilings.
Especially suitable as a finishing coating for weber.therm systems.
For other applications, consult the Technical Department.
Supports:
Concrete
Cement mortar
Lime mortar
Paints
Ceramics
Cast
Wood
Glass
Synthetic material
Details
Webercal Basic
Lime mineral mortar with hydraulic binders, designed for use as a plaster base for all types of two-layer solutions and especially suitable for lime-based two-layer solutions with finish coatings such as render or stucco.Presentation: 25 Kg bags.Colors: Gray and white.Data sheet: TO DOWNLOAD
Lime mortar for thick layer rendering of facades, both in new construction and in rehabilitation.
It constitutes a good base for all types of two-layer solutions and is especially suitable for lime-based two-layer solutions (plasters and stucco) in:
Exteriors and interiors,
Walls and ceilings.
For other applications, consult our Technical Department.
Supports:
Brick Enclosures
Thermoclay Block
Concrete block
Traditional mortar plastering type M-7, 5.
Details
Webercal Revoco
Lime colored and waterproofed mineral mortar for plasters, especially indicated for smooth or floated finishes and ideal for reproducing the more traditional textures of lime coatings: engravings, hammers, chairs, sgraffito, etc.Presentation: 25 Kg bags.Colors: 12 colors available in 4 textures (see catalog).Data sheet: TO DOWNLOADApplications:
Colored lime mineral mortar for plastering:
Both in new construction and rehabilitation
Interior and exterior.
Walls and ceilings.
Especially suitable for:
Obtain smooth and floated textures.
Reproduce traditional lime textures: engravings, martinillas, chairs, sgraffito.
For other applications, consult our Technical Department.
Supports:
Brick walls.
Thermoclay block.
Concrete block and mortar plasters type weber.cal basic.
Details
Webercal Stucco
Traditional colored lime stucco in a thin layer indicated for obtaining coatings with a high aesthetic level in two-layer solutions.Presentation: 25 Kg bags.Colors: 7 colors available (see catalog).Data sheet: TO DOWNLOADApplications:
Lime-based stucco for cladding and decoration with a high aesthetic level, both in:
Both in new construction and rehabilitation
Interior and exterior.
Walls and ceilings.
Especially suitable for:
Obtain smooth and floated textures.
Reproduce traditional lime textures: engravings, martinillas, chairs, sgraffito.
For other applications, consult our Technical Department.
Supports:
Plastering mortar webercal basic, webercal plaster and concrete outdoors; plaster and plasterboard indoors.
Regularizing mortar webertherm base in the webertherm systems.
Details
Weberdry Imper G
Mineral mortar specially designed for the realization of regularization and waterproofing plasters in thick layers on surfaces that require a greater application thickness, on floors, walls or ceilings of buried constructions such as water tanks, ponds, swimming pools, basements, parking lots, pits. elevator, tunnels, foundations, as well as concrete retaining walls.Presentation: 25 Kg bags.Colour: GrayData sheet: UnloadApplications:
Waterproofing of buried constructions such as: tanks, ponds, swimming pools, basements, parking lots, elevator shafts, tunnels, foundations, among others.
In concrete retaining walls.
On floors, walls and ceilings.
Supports:
Concrete.
Brick
Concrete blocks.
Cement-rich mortar plasters (pañete).
Details
Weberdry Imperflex
One-component flexible mortar for waterproofing in areas subject to possible small movements and with risk of cracking such as terraces, balconies, roofs and roofs, before laying a ceramic coating.Presentation: 15 Kg bags.Colors: Gray One-component flexible waterproofing mortar for:
Rehabilitation and waterproofing of terraces and balconies and in general, outdoor surfaces exposed to significant thermal changes such as cantilevers for terraces, roofs and cornices.
Waterproofing of concrete tanks for drinking water.
In bathrooms, showers and swimming pools prior to the placement of ceramic tiles.
In cracked walls or that can be subjected to small movements.
Supports:
Smooth concrete.
Precast concrete elements.
Plasters (pañete) of mortar and ceramic.
Data sheet: TO DOWNLOAD
Details
Weberdry Imperflex
One-component flexible mortar for waterproofing in areas subject to possible small movements and with risk of cracking such as terraces, balconies, roofs and roofs, before laying a ceramic coating.Presentation: 15 Kg bags.Colors: GrayTechnical Sheet: https://www.es.weber/files/es/2020-01/FTC-ES-P-weberdry-imperflex.pdfSingle-component flexible waterproofing mortar for: - Rehabilitation and waterproofing of terraces and balconies and in general, exterior surfaces exposed to significant thermal changes such as terrace overhangs, roofs and cornices. - Waterproofing of concrete tanks for drinking water. - In bathrooms, showers and swimming pools prior to laying ceramic tiles. - In cracked walls or that can be subjected to small movements.Supports:-Smooth concrete. - Precast concrete elements. - Mortar and ceramic plasters.
Details
Weberdry Easy Roof
Hybrid water-based polyurethane waterproofing membrane. Product for waterproofing roofs, decks, balconies and terraces in a durable and simple way. Maximum efficiency in waterproofing wet areas (under tile) in bathrooms and kitchens, as well as in protecting against moisture in concrete constructions such as bridges, tunnels, etc.Presentation: 25Kg Plastic Drums.Colors: White, tile and gray.Data sheet: TO DOWNLOADApplications:
Roofs, balconies, decks and terraces.
Wet areas (under tile) in bathrooms and kitchens.
In concrete constructions such as bridges, tunnels, etc.
Supports:
All types of supports, such as ceramic, mortar, concrete, asphalt fabric, metal supports, among others.
Lime mortar
Paints
Ceramics
Details
Weberdry Easy Roof
Hybrid waterproofing waterproofing polyurethane membrane. Product for waterproofing roofs, roofs, balconies and terraces in a durable and simple way. Maximum efficiency in waterproofing wet areas (under tile) in bathrooms and kitchens, as well as in protecting against moisture in concrete constructions such as bridges, tunnels, etc.Presentation: 25Kg Plastic Drums.Colors: White, tile and gray.Technical Sheet: https://www.es.weber/files/es/2019-05/FTC-ES-P-weberdry-easy-roof.pdfApplications:- Roofs, balconies, roofs and terraces. - Wet areas (under tile) in bathrooms and kitchens. - In concrete constructions such as bridges, tunnels, etc.Supports:- All kinds of supports, such as ceramics, mortar, concrete, asphalt cloth, metal supports, among others. - Lime mortar - Paints - Ceramics
Details
Weberdry Fabric 65
Polyester technical geotextile for the reinforcement of liquid waterproofing membranes in singular points sensitive to the waterproofing cracking, such as half shells, encounters between different planes, drains, chimneys, pipes and watertight sealing of structural joints and expansion.Presentation: 100M2 rollData sheet: DOWNLOADApplications:
Reinforcing fabric in combination with liquid polyurethane membranes weberdry.
Treatment of singular points such as half reeds, drains, chimneys, pipes, etc.
Watertight sealing of structural and expansion joints.
Supports:
In combination with liquid polyurethane membranes Weberdry.
Details
Weberdry Fabric 65
Technical polyester geotextile for the reinforcement of liquid waterproofing membranes in singular points sensitive to the cracking of the waterproofing, such as half-pipes, encounters between different planes, drains, chimneys, tubes and watertight sealing of structural joints and expansion.Presentation: Roll of 100M2Technical Sheet: https://www.es.weber/files/es/2019-12/FTC_weberdry_fabric_65.pdfApplications:- Reinforcing fabric in combination with weberdry liquid polyurethane membranes. - Treatment of singular points such as half pipes, drains, chimneys, pipes, etc. - Watertight sealing of structural and expansion joints.Supports:- In combination with Weberdry liquid polyurethane membranes.
Details
Webercol Dur
High performance adhesive with mixed cement and resin binders, long open time and slip resistant, suitable for laying ceramic, marble, mosaics, glass paste, etc., on exterior and interior flooring and interior cladding. Suitable for placement in pools.Presentation: 25 Kg bags.Colors: Gray and White.Technical Sheet: https://www.es.weber/files/es/2018-11/FTC-ES-P-webercol-dur.pdfApplications:Interior cladding and interior and exterior paving, both in residential areas (kitchens, dining rooms, bathrooms) and urban areas. - Suitable for terraces, balconies and outdoor pavements in general subject to permanent humidity and frost. - Suitable for permanent immersion and wet environments such as swimming pools, baths, shower trays, saunas, spas, tanks, cold rooms, etc.Supports:- Cement-based screeds and self-leveling mortars. - Walls plastered with cement mortar and bastard mortar. - Laminated gypsum boards (gypsum board) waterproofed and non-waterproofed. Indoor fiber cement plates. -Rigid cementitious waterproofing (type weber.tec imper F or weber.tec imper G) and flexible (type weber.tec imperflex).
Details
Webercol Flex³ Superapid
One-component, fast-setting and highly deformable adhesive (C2FTES2) formulated with mixed cement-resin binders that allows the quick commissioning of the installed ceramic. Suitable for laying all kinds of ceramic tiles, marble, natural stone or the like of any absorption and format, and especially large format. Suitable for deformable supports or subject to movement or vibrations (wood, elastic waterproofing type webertec hydrolastic). Placements in interior and exterior pavements and coatings. Suitable for facades.Presentation: 25 Kg bags.Colors: Gray.Applications:• Interior and exterior coatings and pavements in residential, commercial, industrial and urban areas. • Indoor flooring and cladding in residential areas such as kitchens, dining rooms, bathrooms, ... • Indoor ceramic laying directly on pre-existing ceramic flooring or cladding in residential, commercial and industrial areas • Heavy traffic pavements and large surfaces where rapid commissioning is required. • Laying of radiant heating floors with pieces of any format and absorption, especially suitable for large formats. • Ceramic tiles placed on anhydrite screeds, after applying weberprim TP05, diluted 1: 5. • Industrial and commercial pavements subjected to intense traffic. • Ceramic installation on interior wooden walls and floors after application of weberprim FX15. • Suitable for terraces, balconies and outdoor pavements in general subject to permanent humidity and frost. • Suitable for permanent immersion and humid environments such as swimming pools, baths, shower trays, saunas, spas, tanks, cold rooms, etc. • Cladding on facades. • Laying of ceramic on elastic waterproofing (webertec hydrolastic type) with pieces of format up to 2,400 cm.Supports:• Cement-based screeds and self-leveling mortars. • Walls plastered with cement mortar and bastard mortar. • Concrete, precast concrete and foam concrete. • Plaster plasters, precast plaster and/or plaster panels. • Laminated plasterboard (plasterboard) waterproofed and non-waterproofed. • Fiber cement plates. • Pre-existing floor and wall tiles made of ceramic, terrazzo, natural stone, etc. • Anhydrite screeds • Radiant heating floors (cement-based or anhydrite). • Rigid cementitious waterproofing (type webertec imper F or webertec imper G) and flexible (type webertec imperflex). • Elastic waterproofing (webertec hydrolastic type). • Rigid cementitious waterproofing (type webertec imper F or webertec imper G) and flexible (type webertec imperflex). • Elastic waterproofing (webertec hydrolastic type). • Wooden supports after application of weberprim FX15 express. • Elastic waterproofing (webertec hydrolastic type) with pieces of format up to 2,400 cm.Technical Sheet: TO DOWNLOAD
Details
Webercol Flex³ Supergel
Thixotropic adhesive reinforced with glass fibers and mixed cement and resin binders, flexible and highly defomable, with long open time and no slippage, for laying all kinds of ceramic tiles, of any absorption and especially of large format. Suitable for highly deformable supports (wood, elastic waterproofing type webertec hydrolastic). Placements on interior and exterior walls and pavements.Presentation: 25 Kg bags.Colors: White.Applications:- Interior cladding and interior and exterior paving in residential, commercial, industrial and urban areas. - Indoor flooring and cladding in residential areas such as kitchens, dining rooms, bathrooms, ... - Suitable for terraces, balconies and outdoor pavements in general subject to permanent humidity and frost. - Suitable for permanent immersion and wet environments such as swimming pools, baths, shower trays, saunas, spas, tanks, cold rooms, etc. - Industrial and commercial pavements subjected to intense traffic. - Laying ceramic directly on pre-existing ceramic coatings and pavements in residential, commercial and industrial areas. - Ceramic installation on interior wooden walls and floors after application of weberprim FX15 express. - Radiant heating floors with pieces of any format and absorption, especially suitable for large formats. - Cladding on facades at height, especially with a large format.Supports:- Self-leveling screeds and mortars on a cement basis. - Walls plastered with cement mortar and bastard mortar. - Concrete, precast concrete and foam concrete. - Plaster plasters, precast plaster and/or plaster panels. - Laminated gypsum boards (gypsum board) waterproofed and non-waterproofed. - Fiber cement plates. -Large format ceramic brick. - Pre-existing pavements and coatings of ceramic, terrazzo, mosaics, natural stone, etc. - Anhydrite screeds (with or without radiant heating), after treating the - substrate with weberprim TP05, diluted 1: 5. - Radiant heating floors (cement-based or anhydrite). - Rigid cementitious waterproofing (type webertec imper F or webertec imper G) and flexible (type webertec imperflex). -Elastic waterproofing (webertec hydrolastic type). -Wooden supports after application of weberprim FX15 express. - Elastic waterproofing (webertec hydrolastic type) with pieces of format up to 2,400 cm.Technical Sheet: TO DOWNLOAD
Details
Webercol Flex² Multirapid
Rapid setting, extended open time and low take-off mixed mortar glue mortar that allows quick commissioning of the installed ceramic. Laying of facades and flooring for large surfaces, etc., with ceramic, marble, natural stone or the like, small or large, absorbent or non-absorbent. Outdoors and indoors.Presentation: 25 Kg bags.Colors: Gray and White.Applications:Heavy traffic pavements and large surfaces where rapid commissioning is required. - Laying ceramic directly on old ceramic. - Laying of radiant heating floors. - Laying ceramic on balconies and terraces. - Ceramic placement in anhydrite screeds, after application of weberprim TP05, diluted 1: 5. - Suitable in immersion.Supports:- Cement-based screeds and self-leveling mortars. - Walls plastered with cement mortar and bastard mortar. - Concrete. -Radiant heating floors. -Ancient pottery.Technical Sheet: TO DOWNLOAD
Details
Webercol Flex² Multigel
Thixotropic adhesive reinforced with glass fibers and mixed cement and resin binders, flexible and deformable, with long open time and no slip, for laying all kinds of ceramic tiles of any absorption. Placements on interior and exterior walls and pavements.Presentation: 25 Kg bags.Colors: Gray and White.Applications:- Suitable for laying all kinds of ceramic tiles of any degree of absorption such as porcelain stoneware, rustic stoneware, glass and ceramic mosaic, fired clay tiles, Catalan tile, tile, etc. - Suitable for laying natural stone (marble, granite, etc.) and artificial recomposed materials (terrazzo-type cement conglomerate). - Suitable for laying artificial recomposed materials (resin-based agglomerates) that are not subject to deformation. - Suitable for pieces reinforced with fiber mesh in pavement and interior wall of up to 70cm in length from the longest side of the tile.Supports:- Self-leveling screeds and mortars on a cement basis. - Walls plastered with cement mortar and bastard mortar. - Concrete, precast concrete and foam concrete. - Lime, plaster, precast plaster and/or plaster panels. - Laminated gypsum boards (gypsum board) waterproofed and non-waterproofed. - Fiber cement plates. -Large format ceramic brick. - Pre-existing pavements and coatings of ceramic, terrazzo, mosaics, natural stone, etc. - Anhydrite screeds (with or without underfloor heating), after treating the substrate with weberprim TP05, diluted 1: 5. - Radiant heating floors (cement-based or anhydrite). Rigid cementitious waterproofing (type webertec imper F or webertec imper G) and flexible (type webertec imperflex). - Wooden supports after application of weberprim FX15 express. -Elastic waterproofing (webertec hydrolastic type) with pieces of format up to 30x30cm.Technical Sheet: TO DOWNLOAD
Details
Webercol Flex² Multi
Flexible and deformable adhesive with mixed cement and resin binders, long open time and slip resistant, for laying all kinds of ceramic tiles, of any format and absorption. Placements on interior and exterior walls and pavements.Presentation: 25 Kg bags.Colors: Gray and White.Applications:- High-rise façade cladding and intense traffic paving (not susceptible to stains due to water absorption). - For pieces of any format and absorption. - Demanding placements in interior and exterior flooring and cladding. Radiant heating floors. -Suitable for swimming pools (suitable for immense).Supports:Cementitious mortar, concrete, old ceramics, plaster, precast plaster, plasterboard and ahnidrite slabs.Technical Sheet: TO DOWNLOAD
Details
Webercol Flex Duorapid
Rapid-setting mixed-bond glue mortar, which enables the quick installation of the installed ceramic. Thanks to its innovative technology, it allows rapid setting even at low temperatures. Laying on interior floors and walls and exterior floors with ceramic, porcelain stoneware, marble, natural stone or similar, of any format, absorbent or non-absorbent.Presentation: 25 Kg bags.Colors: Gray and White.Applications:- Heavy traffic pavements and large surfaces where rapid commissioning is required. - Placing ceramic directly on old ceramic. - Laying ceramic on balconies and terraces. - Suitable in immersion.Supports:Cement-based screeds and self-leveling mortars. - Walls plastered with cement mortar and bastard mortar. - Concrete. -Ancient pottery.Technical Sheet: Download
Details
Webercol Flex Duogel
Thixotropic adhesive reinforced with glass fibers and mixed cement and resin binders, flexible, with long open time and no slip, for laying all kinds of ceramic tiles and especially porcelain stoneware, of any format and absorption. Placements on walls, interior and exterior pavements.Presentation: 25 Kg bags.Colors: Gray and White.Applications:1. Placement of pieces of any format and especially absorption of porcelain stoneware. 2. In exterior and interior pavements and interior cladding. 3. For Pools (suitable in immersion). 4. Façade cladding up to 3M high. 5. Radiant heating with small format pieces.Supports:1. Concrete and cement-based floors. 2. Walls: glued with cementitious mortar, concrete, plaster, precast plasterboard and plasterboard.Technical Sheet: Download
Details
Webercol Flex Duo
Flexible adhesive with mixed cement and resin binders, long open time and slip resistant, for laying all kinds of ceramic tiles and especially porcelain stoneware, of any format and absorption. Placements on interior and exterior walls and pavements.Presentation: 25 Kg bags.Colors: Gray and White.Applications:1. Placement of pieces of any format and absorption (not susceptible to stains by water absorption), especially porcelain stoneware. 2. In exterior and interior pavements and interior cladding. 3. Placement of porcelain stoneware in swimming pools, on plaster supports and in situations with high demands on use.Supports:1. Concrete and cement-based floors. 2. Walls: glued with cementitious mortar, concrete, plaster, precast plasterboard and plasterboard.Technical Sheet: Download
Details
Webercal Stucco
Traditional lime stucco colored in a thin layer indicated for obtaining coatings with a high aesthetic level in two-layer solutions.Presentation: 25 Kg bags.Colors: 7 colors available (see catalog).Technical Sheet: https://www.es.weber/files/es/2019-07/FTC-ES-P-webercal-estuco.pdfApplications:- Lime-based stucco for coating and decoration with a high aesthetic level, both in: o Both in new construction and rehabilitation o Interiors and exteriors. or Walls and ceilings. - Especially indicated for: o Obtain smooth and textured textures. o Plays traditional lime textures: engravings, hammers, masonry, sgraffito. - For other applications, consult our Technical Department.Supports:- Webercal basic plastering mortar, webercal plaster and outdoor concrete; plaster and plasterboard indoors. - Webertherm standardizing mortar based on webertherm systems. - For other applications, consult the Technical Department
Details
Webercal Basic
Lime mineral mortar with hydraulic binders, designed for use as a plaster base for all types of bilayer solutions and especially suitable for lime based bilayer solutions with finish coatings such as plasters or stuccos.Presentation: 25 Kg bags.Colors: Gray and White.Technical Sheet: https://www.es.weber/files/es/2018-07/FTC-ES-P-webercal-basic.pdf.pdfApplications:- Lime mortar for plastering facades in thick layers, both in new construction and in renovation. - It constitutes a good base for all types of bilayer solutions and is especially suitable for bilayer solutions based on lime (plaster and stucco) in: - Exteriors and interiors, - Walls and ceilings. - For other applications, consult our Technical Department.Supports:- Brick Enclosures - Thermoclay Block - Concrete block - Traditional mortar plastering type M-7, 5.
Details
Flexible Webercal
Colored lime stucco in a deformable thin layer, specially designed for use as a coating on thermal insulation systems by the outside webertherm.Presentation: Containers of 16 Kg.Colors: 12 colors available (see color chart).Technical Sheet: https://www.es.weber/files/es/2020-01/FTC_ES_P-webercal-flexible.pdfApplications:High performance deformable thin layer mineral stucco for waterproofing, decoration and durable protection of: - Interior and exterior - Walls and ceilings. Especially suitable as a finishing coating for weber.therm systems. - For other applications, consult the Technical Department.Supports:- Concrete - Cement mortar - Lime mortar - Paintings - Ceramic -Cast - Wood -Glass - Synthetic material
Details
Weberpral Arid
Waterproof and breathable colored mineral mortar for cladding and decoration of facades, indicated to obtain a projected stone finish.Presentation: 25 Kg bags.Colors: 10 colors available (see color chart).Technical Sheet: https://www.es.weber/files/es/2018-07/FTC-ES-P-weberpral-arid.pdf.pdfApplications:- Interior and exterior. - On walls and ceilings.Supports:- Concrete. - Lime mortar. - Cement mortar. - Brick and Thermoclay. - Concrete block. - Lightened blocks.
Details
Weber Flex P100
Polyurethane adhesive putty for sealing all types of joints and fissures (expansion joints, structural joints, joints between materials, among others). Multipurpose elastic bonding of materials such as partitions, partitions, fiber cement or melanin plates, tiles, wood, ceramics, baseboards, etc.Presentation: 600 ml sausage and 300 ml cartridges.Colors: White, Gray, Brown and Black.Data sheet: TO DOWNLOADApplications:
Sealing of all types of joints and fissures such as expansion joints, structural joints, joints between materials, etc.
Multipurpose elastic bonding of materials such as partitions, partitions, fiber cement or melanin plates, wooden tiles, ceramics, baseboards, etc.
Joint sealing of precast concrete elements
Supports:
High adhesion on all types of supports.
Details
Weber Foam PU32
Expansive polyurethane foam for filling and sealing gaps or holes in walls and ceilings in contact with the outside and for treating thermal bridges, as well as for spot gluing EPS tiles and plates.Presentation: Box of 12 sprays of 750 ml for spray application.Colour: YellowData sheet: TO DOWNLOADApplications:
Sealing of gaps, holes in walls and ceilings with the exterior and thermal bridges.
Door and window assemblies.
Acoustic screen and silencer layer applications.
Optimization of insulation in refrigeration.
Spot gluing of EPS tiles and plates.
Supports:
High adhesion on all types of substrates, except PE and PP.
Details
Weberglue MS55
Fast and very elastic polymer adhesive, for gluing all kinds of elements such as mirrors, mailboxes, parquet baseboards, etc. on all types of substrates, both indoors and outdoors, and resistant to temperatures between -40 ºC and +90 ºC.Presentation: Boxes of 12 cartridges of 300 mL, pallets of 120 boxesColors: WhiteData sheet: TO DOWNLOADApplications:
Fast bonding of all types of materials (except polypropylene plastics and bituminous products): mirrors, mailboxes, parquet baseboards, etc ... both indoors and outdoors.
Both in industry and construction.
Supports:Concrete, Cement Mortar, Ceramic, Metal, Brick, Wood, Glass, Synthetic
Details
Weber Latex C10
Multipurpose concentrated latex. Liquid additive to increase adhesion and flexibility, as well as the surface hardness of cementitious products.Presentation: 10 kg drum - 400 kg pallet (40 units)Data sheet: TO DOWNLOADApplications:
Additivation of glue mortars to increase their adherence and flexibility in extreme situations.
Additivation of grouting mortars in thin-layer repairs.
Additivation of monolayer mortars if applied on weak substrates.
Increase the adhesion of cement grouts.
Supports: Cement mortar, Lime mortar.
Details
Weber Latex C10
Multipurpose concentrated latex. Liquid additive to increase adhesion and the flexibility, as well as the surface hardness of cementitious products.Presentation: 10 kg drum - 400 kg pallet (40 units)Data sheet:https://www.es.weber/files/es/2018-07/FTC-ES-P-weber-latex-c10.pdf.pdfApplications:
Additivation of glue mortars to increase their adherence and flexibility in extreme situations.
Additivation of grouting mortars in thin-layer repairs.
Additivation of monolayer mortars if applied on weak substrates.Increase the adherence of cement grouts.
Supports: Cement mortar, Lime mortar.
Details
Weberglue MS55
Fast and highly elastic polymer adhesive, for gluing all kinds of elements such as mirrors, mailboxes, parquet baseboards, etc. on all types of supports, both indoors and in exterior, and resistant to temperatures between -40 ºC and +90 ºC.Presentation: Boxes of 12 cartridges of 300 mL, pallets of 120 boxes
Colors: White
Data sheet:
https://www.es.weber/files/es/2018-07/FTC-ES-P-weber-glue-ms55.pdf.pdfApplications:
Fast bonding of all types of materials (except polypropylene plastics and bituminous products): mirrors, mailboxes, parquet baseboards, etc ... both indoors and outdoors.
Both in industry and construction.
Supports:
Concrete, Cement Mortar, Ceramic, Metal, Brick, Wood, Glass, Synthetic
Details
Weber Foam PU32
Expansive polyurethane foam for filling and sealing gaps or holes in walls and ceilings in contact with the outside and treating thermal bridges, as well as for the specific gluing of EPS tiles and platesPresentation: Box of 12 sprays of 750 ml for spray application.Color: YellowData sheet:https://www.es.weber/files/es/2018-07/FTC-ES-P-weber-foam-pu-32.pdf.pdf
Applications:
Sealing of gaps, holes in walls and ceilings with the exterior and thermal bridges.
Door and window assemblies.
Acoustic screen and silencer layer applications.
Optimization of insulation in refrigeration.
Spot gluing of EPS tiles and plates.
Supports:
High adhesion on all types of substrates, except PE and PP.
Details
Weber Flex P100
Polyurethane adhesive putty for sealing all types of joints and fissures (expansion, structural, joint between materials, among others). Multi-purpose elastic bonding of materials such as partitions, partitions, fibercement or melanin plates, tiles, wood, ceramics, baseboards, etc.
Presentation: 600 ml Salchichón and 300 ml Cartridges.Colors: White, Gray, Brown and Black.Data sheet:https://www.es.weber/files/es/2018-07/FTC-ES-P-weber-flex-p100.pdf.pdfApplications:
Sealing of all types of joints and fissures such as expansion joints, structural joints, joints between materials, etc.
Multipurpose elastic bonding of materials such as partitions, partitions, fiber cement or melanin plates, wooden tiles, ceramics, baseboards, etc.
Joint sealing of precast concrete elements
Supports:
High adhesion on all types of supports.
Details
Weberfloor Dur
Fiber-reinforced industrial polymeric self-leveling mortar for thicknesses from 5 to 30 mm
Excellent resistance to flexotraction and abrasion.
Quick commissioning for floors with heavy traffic.
Compensated shrinkage and high crack-bridging capacity.
Pumpable. High productivity ..
Data sheet: TO DOWNLOAD
Details
Weberfloor Dur
Fiber-reinforced industrial polymeric self-leveling mortar for thicknesses from 5 to 30 mm
Excellent resistance to flexotraction and abrasion.
Quick commissioning for heavily trafficked floors.
Compensated shrinkage and high crack-bridging capacity.
Pumpable. High productivity ..
Data sheet: TO DOWNLOAD
Details
Weberfloor Light Structural
Light renovation mortar for large screeds
40% lighter than conventional concrete
High mechanical resistance (25 MPa)
Quick and easy execution
Thicknesses from 30 mm
Suitable for large thicknesses.
Data sheet: TO DOWNLOAD
Details
Weberfloor Rapid
Quick self-leveling mortar for thicknesses from 3 to 10 cm. High performance self-leveling polymeric technical screed for smoothing and regularizing interior floors in thick layers from 3 to 10 cm thick. Thanks to its self-leveling power, it allows to obtain surfaces with a high flatness for laying light pavements, ceramics and technical floors with high productivity as it is suitable to be pumped. It allows rapid commissioning both for transit and for coating as it is fast setting and drying, in addition to minimizing the appearance of shrinkage cracks compared to conventional self-leveling as it is compensated for shrinkage. Suitable for radiant heating and as a floating screed.Data sheet: TO DOWNLOAD
Details

Title