Kit for waterproofing in areas subject to possible small movements and with risk of cracking before laying a ceramic coating, consisting of 25 kg. of powdered mortar and a bottle of 8.3 kg. of latex to be mixed.PRESENTATION:Component A 25 kg bag. Color: Gray powder. Component B 8.3 kg drum. Color: White liquid.APPLICATIONS:• Waterproofing of balconies, terraces (even paved), roofs and, in general, absorbent and non-absorbent substrates, always being stable and consistent • Waterproofing of showers, bathtubs and swimming pools, before laying ceramic tiles • Flexible support coatings with small cracks in concrete and precast structures • Protection of concrete surfaces against the action of carbon dioxide, smog, chlorides, sulfates, etc. • Retaining wall waterproofing coatings • Waterproofing of water tanks (suitable for drinking water, ARPA cert. Under Ministerial Decree 174/2004), being necessary to wash with clean water after setting. Associated coatings: Mineral plasters, ceramics, paints and acrylic mortars • SUPPORTS • Smooth concrete, precast concrete elements, mortar and ceramic plastersData sheet: Descarga- Applications:
- Adhesion promoter on smooth concrete in facades after application
- mineral coatings
- Adhesion bridge on ceramic and wooden floors in residential areas.
- Applications:
- Repair and sealing of pores, cavities and gravel nests on concrete and mortar support.
- Thin-film coating of vertical structural elements and horizontals such as floors, pillars and beams.
- Surface regularization of all types of concrete: shotcrete, formwork and concrete slabs.
- Edge repair work, joint reprofiling, etc.
- Repair and regularization of facades and walls in rehabilitation
- Suitable for both new construction and rehabilitation.
- Supports:Any mortar from the weberpral, webercal or weberev range. o Webertherm base and webertherm base plus high performance mortar. o Concrete, lightened concrete or aerated concrete. o Paints and synthetic coatings or thatData sheet: Descarga
- Applications:• Highly decorative, finishing, ready-to-use thin-layer acrylic coating circular or linear trowel, it is suitable for exterior and interior and for walls and ceilings. Form part of the exclusive webertherm insulation and weberenova renovation systems. • Specially developed formula for extra protection against proliferation of microorganisms. • For other applications, consult our Technical Department. • Available in 2 granulometries: L: max 1.5 mm XL: max 2.5 mmData sheet: Descarga
- Thick-layer lime plaster.Lime mineral mortar with hydraulic binders, designed for use as a plaster base for all types of two-layer solutions and especially suitable for lime-based two-layer solutions with finish coatings such as render or stucco.Presentation: 25 kg bagsColors: Gray and whiteApplication:Lime mortar for thick layer rendering of facades, both in new construction and in rehabilitation.It is a good base for all types of two-layer solutions and is especially suitable for lime-based two-layer solutions (render and stucco) in: o exterior and interior, o walls and ceilings. For other applications, consult our Technical Department.Data sheet: Descarga
- Formwork fillings and structural anchors (85 Mpa)Compensated shrinkage fluid mortar, impervious to water, oils and greases, which achieves a compressive strength of 85 MPa after 28 days, specially designed for anchoring metallic elements on concrete, as well as anchoring precast concrete elements or filling of formwork, cracks and cavities inside concrete masses.Presentation: 25 Kg bags.Colors: GrayApplication:• Reinforcement passivator in formwork and anchoring works. • Structural repair of formwork concrete. • Increase in section in structural repairs. • Backfilling and anchoring of heavy machinery on concrete surfaces. • Filling of formwork and reinforcement of structures. • Filling of cracks and voids inside concrete masses. • Anchoring of metallic elements on concrete: posts, bolts or pillars. • Anchors of precast concrete elements. • Filling by pouring, under support plates and distributionData sheet: Descarga
- Formwork fillings and structural anchors (85 Mpa)Compensated shrinkage fluid mortar, impervious to water, oils and greases, which achieves a compressive strength of 85 MPa after 28 days, specially designed for anchoring metallic elements on concrete, as well as anchoring precast concrete elements or filling of formwork, cracks and cavities inside concrete masses.Presentation: 25 Kg bags.Colors: GrayApplication:• Reinforcement passivator in formwork and anchoring works. • Structural repair of formwork concrete. • Increase in section in structural repairs. • Backfilling and anchoring of heavy machinery on concrete surfaces. • Filling of formwork and reinforcement of structures. • Filling of cracks and voids inside concrete masses. • Anchoring of metallic elements on concrete: posts, bolts or pillars. • Anchors of precast concrete elements. • Filling by pouring, under support plates and distributionData sheet: Descarga
- Formwork fillings and structural anchors (60 MPa).Compensated shrinkage fluid mortar that achieves a compressive strength of 60 MPa at 28 days, specially designed for anchoring metallic elements on concrete, as well as anchoring precast concrete elements or filling of formwork, cracks and cavities inside concrete masses.Presentation: 25 Kg bags.Colors: GrayApplications:• Backfilling and anchoring of heavy machinery on concrete surfaces. • Filling of formwork and reinforcement of structures. • Filling of cracks and voids inside concrete masses. • Anchoring of metallic elements on concrete: posts, bolts or pillars. • Anchors of precast concrete elements. • Filling by pouring, under support plates and distribution.Data sheet: Descarga
Mortero autonivelante rápido para espesores de 1 a 10 mm
Recrecido técnico polimérico autonivelante de altas prestaciones para el alisado y regularización de pavimentos interiores en capa fina con espesores de 1 a 10 mm. Gracias a su poder autonivelante permite obtener superficies con una alta planimetría y de acabado muy fino ideal para la colocación de pavimentos ligeros, cerámica y suelos técnicos con una alta productividad al ser apto para ser bombeado. Permite una rápida puesta en servicio tanto para transitar como para revestir al ser de fraguado y secado rápido, además de minimizar la aparición de fisuras por retracción frente a un autonivelante convencional al ser de retracción compensada. Apto para calefacción
radiante.Data sheet: DESCARGAR
- Quick self-leveling mortar for thicknesses from 3 to 10 cm.High performance self-leveling polymeric technical screed for smoothing and regularizing interior floors in thick layers from 3 to 10 cm thick. Thanks to its self-leveling power, it allows obtaining surfaces with a high level of flatness for laying light pavements, ceramics and technical floors with high productivity as it is suitable to be pumped. It allows a quick start-up both for transit and for coating as it is fast setting and drying, in addition to minimizing the appearance of shrinkage cracks compared to a conventional self-leveling as it is compensated for shrinkage. Suitable for radiant heating and as a floating screed.Data sheet: DESCARGAR
- Fiber-reinforced industrial polymeric self-leveling mortar for thicknesses from 5 to 30 mm
- Excellent resistance to flexotraction and abrasion.
- Quick commissioning for heavily trafficked floors.
- Compensated shrinkage and high crack-bridging capacity.
- Pumpable. High productivity ..
- Multipurpose concentrated latex.Liquid additive to increase adhesion and the flexibility, as well as the surface hardness of cementitious products.Presentation: 10 kg drum - 400 kg pallet (40 units)Data sheet:https://www.es.weber/files/es/2018-07/FTC-ES-P-weber-latex-c10.pdf.pdfApplications:
- Additivation of glue mortars to increase their adherence and flexibility in extreme situations.
- Additivation of grouting mortars in thin-layer repairs.
- Additivation of monolayer mortars if applied on weak substrates.Increase the adherence of cement grouts.
- Fast and highly elastic polymer adhesive, for gluing all kinds of elements such as mirrors, mailboxes, parquet baseboards, etc. on all types of supports, both indoors and in exterior, and resistant to temperatures between -40 ºC and +90 ºC.Presentation: Boxes of 12 cartridges of 300 mL, pallets of 120 boxes
Colors: White
Data sheet:
https://www.es.weber/files/es/2018-07/FTC-ES-P-weber-glue-ms55.pdf.pdfApplications:- Fast bonding of all types of materials (except polypropylene plastics and bituminous products): mirrors, mailboxes, parquet baseboards, etc ... both indoors and outdoors.
- Tanto en industria como construcción.
Concrete, Cement Mortar, Ceramic, Metal, Brick, Wood, Glass, Synthetic
- Expansive polyurethane foam for filling and sealing gaps or holes in walls and ceilings in contact with the outside and treating thermal bridges, as well as for the specific gluing of EPS tiles and platesPresentation: Box of 12 sprays of 750 ml for spray application.Colour: YellowData sheet:https://www.es.weber/files/es/2018-07/FTC-ES-P-weber-foam-pu-32.pdf.pdf
Applications:
- Sealing of gaps, holes in walls and ceilings with the exterior and thermal bridges.
- Door and window assemblies.
- Acoustic screen and silencer layer applications.
- Optimization of insulation in refrigeration.
- Spot gluing of EPS tiles and plates.
- High adhesion on all types of substrates, except PE and PP.
Polyurethane adhesive putty for sealing all types of joints and fissures (expansion, structural, joint between materials, among others). Multi-purpose elastic bonding of materials such as partitions, partitions, fibrocement or melanin plates, tiles, wood, ceramics, baseboards, etc.
Presentation: 600 ml Salchichón and 300 ml Cartridges.Colors: White, Gray, Brown and Black.Data sheet:https://www.es.weber/files/es/2018-07/FTC-ES-P-weber-flex-p100.pdf.pdfApplications:- Sealing of all types of joints and fissures such as expansion joints, structural joints, joints between materials, etc.
- Multipurpose elastic bonding of materials such as partitions, partitions, fiber cement or melanin plates, wooden tiles, ceramics, baseboards, etc.
- Joint sealing of precast concrete elements
- High adhesion on all types of supports.
- Technical polyester geotextile for the reinforcement of liquid waterproofing membranes in singular points sensitive to the cracking of the waterproofing, such as half-pipes, encounters between different planes, drains, chimneys, tubes and watertight sealing of structural joints and expansion.Presentation: Roll of 100M2Technical Sheet: https://www.es.weber/files/es/2019-12/FTC_weberdry_fabric_65.pdfApplications:- Reinforcing fabric in combination with weberdry liquid polyurethane membranes. - Treatment of singular points such as half pipes, drains, chimneys, pipes, etc. - Watertight sealing of structural and expansion joints.Supports:- In combination with Weberdry liquid polyurethane membranes.
- Hybrid waterproofing waterproofing polyurethane membrane. Product for waterproofing roofs, roofs, balconies and terraces in a durable and simple way. Maximum efficiency in waterproofing wet areas (under tile) in bathrooms and kitchens, as well as in protecting against moisture in concrete constructions such as bridges, tunnels, etc.Presentation: 25Kg Plastic Drums.Colors: White, tile and gray.Technical Sheet: https://www.es.weber/files/es/2019-05/FTC-ES-P-weberdry-easy-roof.pdfApplications:- Roofs, balconies, roofs and terraces. - Wet areas (under tile) in bathrooms and kitchens. - In concrete constructions such as bridges, tunnels, etc.Supports:- All kinds of supports, such as ceramics, mortar, concrete, asphalt cloth, metal supports, among others. - Lime mortar - Paints - Ceramics
- One-component flexible mortar for waterproofing in areas subject to possible small movements and with risk of cracking such as terraces, balconies, roofs and roofs, before laying a ceramic coating.Presentation: 15 Kg bags.Colors: GrayTechnical Sheet: https://www.es.weber/files/es/2020-01/FTC-ES-P-weberdry-imperflex.pdfSingle-component flexible waterproofing mortar for:- Rehabilitation and waterproofing of terraces and balconies and in general, exterior surfaces exposed to significant thermal changes such as terrace overhangs, roofs and cornices. - Waterproofing of concrete tanks for drinking water. - In bathrooms, showers and swimming pools prior to laying ceramic tiles. - In cracked walls or that can be subjected to small movements.Supports:- Smooth concrete. - Precast concrete elements. - Mortar and ceramic plasters.
- Traditional lime stucco colored in a thin layer indicated for obtaining coatings with a high aesthetic level in two-layer solutions.Presentation: 25 Kg bags.Colors: 7 colors available (see catalog).Technical Sheet: https://www.es.weber/files/es/2019-07/FTC-ES-P-webercal-estuco.pdfApplications:- Lime-based stucco for coating and decoration with a high aesthetic level, both in: o Both in new construction and rehabilitation o Interiors and exteriors. o Walls and ceilings. - Especially indicated for: o Obtain smooth and textured textures. o Reproduce traditional lime textures: engravings, hammers, masonry, sgraffito. - For other applications, consult our Technical Department.Supports:- Webercal basic plastering mortar, webercal plaster and outdoor concrete; plaster and plasterboard indoors. - Webertherm standardizing mortar based on webertherm systems. - For other applications, consult the Technical Department
- Lime mineral mortar with hydraulic binders, designed for use as a plaster base for all types of bilayer solutions and especially suitable for lime based bilayer solutions with finish coatings such as plasters or stuccos.Presentation: 25 Kg bags.Colors: Gray and White.Technical Sheet: https://www.es.weber/files/es/2018-07/FTC-ES-P-webercal-basic.pdf.pdfApplications:- Lime mortar for plastering facades in thick layers, both in new construction and in renovation. - It constitutes a good base for all types of bilayer solutions and is especially suitable for bilayer solutions based on lime (plaster and stucco) in: - Exteriors and interiors, - Walls and ceilings. - For other applications, consult our Technical Department.Supports:- Brick Enclosures - Thermoclay Block - Concrete block - Traditional mortar plastering type M-7, 5.
- Colored lime stucco in a deformable thin layer, specially designed for use as a coating on thermal insulation systems by the outside webertherm.Presentation: Containers of 16 Kg.Colors: 12 colors available (see color chart).Technical Sheet: https://www.es.weber/files/es/2020-01/FTC_ES_P-webercal-flexible.pdfApplications:High performance deformable thin layer mineral stucco for waterproofing, decoration and durable protection of: - Interior and exterior - Walls and ceilings.Especially suitable as a finishing coating for weber.therm systems. - For other applications, consult the Technical Department.Supports:- Concrete - Cement mortar - Lime mortar - Paintings - Ceramic -Cast - Wood -Glass - Synthetic material
- Highly breathable mortar for sanitation of walls affected by humidity and efflorescence. Both in new construction for the preventive treatment of future dampness due to capillary ascension and in rehabilitation for immediate sanitation of areas affected by moisture from the capillary lift.Presentation: 25 Kg bags.Colors: White.Technical Sheet: https://www.es.weber/files/es/2019-05/FTC-ES-P-webercal-hydromur.pdfApplications:• Mortar for the sanitation of walls affected by humidity of capillary lift and efflorescence. o In new construction as a preventive treatment for future dampness due to capillary ascension. o Whenever an effective, fast and simple sanitation is needed.Supports:• Ceramic brick (hollow and solid). • Natural stone. • Concrete block. • Reinforced concrete.
Colored and waterproofed lime mineral mortar for plasters, especially suitable for smooth or troweled finishes and ideal for reproducing the most traditional textures of lime coatings: engravings, hammers, masonry, sgraffito, etc.Presentation: 25 Kg bags.Colors: 12 colors available in 4 textures (see catalog).Technical Sheet: https://www.es.weber/files/es/2019-07/FTC-ES-P-webercal-revoco.pdfApplications:- Colored lime mineral mortar to render: o Both in new construction and rehabilitation o Interiors and exteriors. o Walls and ceilings. - Especially indicated for: o Obtain smooth and textured textures. o Reproduce traditional lime textures: engravings, hammers, masonry, sgraffito. -For other applications, consult our Technical Department.Supports:- Brick closings. - Thermoclay block. - Concrete block and mortar plastering type weber.cal basic.- Thin layer colored lime plaster for smooth finishes for interior, exterior, façade and ceiling decoration.Presentation: 25 Kg bags.Colors: 8 colors available (see catalog).Technical Sheet: https://www.es.weber/files/es/2020-03/FTC_ES_P-webercal-liso.pdfApplications:- Exteriors and interiors, - Facades and Ceilings - For other applications, consult our Technical Department.Supports:Smooth Webercal should always be applied on a prior basis such as: - Lime mortar - Webercal Revoco - Waterproofed Plastering Mortars - Webercal Basic and Weberevhidro. - In renovations over regular, absorbent and resistant traditional plasters. - For other applications, consult our Technical Department.
- Traditional colored lime stucco in a thin layer indicated for obtaining coatings with a high aesthetic level in two-layer solutions.Presentation: 25 Kg bags.Colors: 7 colors available (see catalog).Technical Sheet: https://www.es.weber/files/es/2019-07/FTC-ES-P-webercal-fino.pdfApplications:• Lime-based stucco for cladding and decoration with a high aesthetic level, both in: o Both in new construction and rehabilitation o Interiors and exteriors. o Walls and ceilings. • Especially suitable for: o Obtain smooth and floated textures. o Reproduce traditional lime textures: engravings, hammers, chairs, sgraffito. • For other applications, consult our Technical Department.Supports:• Webercal basic rendering mortar, webercal rendering and exterior concrete; plaster and plasterboard indoors. • Webertherm base regularizing mortar in webertherm systems.Category: WebercolTag: Lime Stucco and Mortars
- Waterproof and breathable colored mineral mortar for cladding and decoration of facades, indicated to obtain a scraped or rustic finish.Presentation: 25 Kg bags.Colors: 24 chart colors and special colors available (see color chart).Technical Sheet: DescargaApplications:- Interior and exterior. - On walls and ceilings. - New construction and rehabilitationSupports:- Concrete. - Brick and Thermoclay. - Concrete block. - Lightened blocks.
- Waterproof and breathable colored mineral mortar for cladding and decoration of facades, indicated to obtain a projected stone finish.Presentation: 25 Kg bags.Colors: 10 colors available (see color chart).Technical Sheet: https://www.es.weber/files/es/2018-07/FTC-ES-P-weberpral-arid.pdf.pdfApplications:- Interior and exterior. - On walls and ceilings.Supports:- Concrete. - Lime mortar. - Cement mortar. - Brick and Thermoclay. - Concrete block. - Lightened blocks.
- Deformable mortar for creating 3-30 mm wide joints in demanding situations with tiles of any format and absorption in both interior and exterior flooring and cladding, and especially recommended for grouting facades.Presentation: Bag of 15 Kg.Colors: 6 colors available (See catalog).Applications:-Grouting of interior and exterior pavements and coatings.Supports:-Grouting of residential areas of flooring and cladding such as kitchens, dining rooms, bathrooms, underfloor heating, facades, terraces and balconies.-Suitable for grouting pieces with a wide joint (up to 30 mm) such as flooring, natural stone, among others.-Grouting of all kinds of natural stone (marble, granite, ...) or artificial recomposed materials (terrazzo-type cement conglomerate or resin-based agglomerates) that are not subject to deformation.Technical Sheet:https://www.es.weber/files/es/2019-09/FTC_ES_P-webercolor-hydroflex.pdf
- High resistance mortar for the realization of joints up to 15 mm wide in tiles of any format and absorption in interiors and exteriors, and especially recommended for swimming pools, collective bathrooms, terraces and facades.Presentation: 5 Kg Plastic Bag.Colors: 24 colors available.Applications:- Grouting floors and cladding indoors and outdoors.Supports:- Grouting of residential floor and wall areas such as kitchens, dining rooms and bathrooms. - Grouting of all kinds of ceramic tiles of any format and degree of absorption, such as porcelain stoneware, rustic stoneware, enameled stoneware, glass and ceramic mosaic, fired clay tiles, Catalan tile, tile, etc. - Grouting of all types of natural stone (marble, granite, ...) or artificial recomposed materials (terrazzo-type cement conglomerate or resin-based agglomerates) that are not subject to deformation. - Making chemical resistant joints. - Repair of degraded joints.Technical Sheet: Descarga
- Mortar for the realization of waterproof joints from 3 to 15 mm wide in ceramic tile coverings of any type and absorption, especially recommended for grouting on exposed exterior pavements and subject to deformations due to sudden changes in temperature, such as terraces, patios, balconies , etc.Presentation: 25 Kg bags.Colors: 13 colors available (See catalog).Applications:- Grouting flooring and cladding indoors and outdoors.Supports:- Grouting of residential areas of pavements and coatings such as kitchens, dining rooms and bathrooms. - Grouting of all kinds of ceramic tiles of any format and degree of absorption, such as porcelain stoneware, rustic stoneware, enameled stoneware, vitreous and ceramic mosaic, fired clay tiles, Catalan tile, tile, etc. - Grouting of all types of natural stone (marble, granite, ...) or artificial recomposed materials (terrazzo-type cement conglomerate or resin-based agglomerates) that are not subject to deformation.Technical Sheet: DESCARGAR
- Highly fine mortar with an extra smooth finish to fill joints between tiles up to 3 mm wide. Suitable for tiles of any type and absorption. For flooring and wall tiles for interior use.Presentation: 5 Kg plastic bag.Colors: 17 colors available (See catalog).Applications:-Grouting of interior pieces.Supports:- Grouting of residential floor and wall areas such as kitchens, dining rooms and bathrooms. - Grouting of all kinds of ceramic tiles of any format and degree of absorption, such as porcelain stoneware, rustic stoneware, enameled stoneware, glass and ceramic mosaic, fired clay tiles, Catalan tile, tile, etc. - Grouting of all types of natural stone (marble, granite, ...) or artificial recomposed materials (terrazzo-type cement conglomerate or resin-based agglomerates) that are not subject to deformation.Technical Sheet: https://www.es.weber/files/es/2020-01/FTC-ES-P-webercolor-junta-fina.pdf
Adhesive paste based on polyurethane-epoxy with high flexibility and adherence for laying all kinds of ceramic tiles of any format and absorption on interior and exterior walls and floors. Especially indicated for supports subjected to strong vibrations or deformations such as woods, metals and synthetic materials such as vinyl, among others.Presentation: 10 Kg predosed bucket (Component A and B).Colors: White.Applications:- Interior cladding and interior and exterior paving in residential, commercial, industrial and urban areas. - Indoor flooring and cladding in residential areas such as kitchens, dining rooms, bathrooms. - Suitable for terraces, balconies and outdoor pavements in general subjected to humidity and permanent frost. - Cladding on facades. - Laying ceramic on elastic waterproofing (webertec hydrolastic type). - Placements on metal supports. - Placing synthetic materials not compatible with cementitious mortars. - Suitable for humid environments such as bathrooms, shower trays, saunas, spas, tanks, cold rooms, etc. - Industrial and commercial floors of high demand subjected to intense traffic and / or constant vibrations.Supports:- Cement-based screeds and self-leveling mortars. - Walls plastered with cement mortar and bastard mortar. - Concrete, precast concrete and foam concrete. - Fiber cement plates. - Pre-existing floor and wall tiles made of ceramic, terrazzo, natural stone, etc. - Plaster plasters, precast plasterboard and / or plaster. - Laminated plasterboard (plasterboard) waterproofed and non-waterproofed. - Anhydrite screeds. - Rigid cementitious waterproofing and on elastic waterproofing - Polyurethane or epoxy flooring. -Supports subject to movements or vibrations such as wood, parquet floors, chipboard panels. - Old PVC, linoleum and rigid vinyl flooring. - Polyester, metal and paint supports in good condition.Technical Sheet: Descarga- Adhesive paste for laying ceramic tiles on interior walls, especially on deformable supports such as plasterboard and on old tiling.Presentation: 25 Kg bucket.Colors: Off white.Applications:- Ceramic coatings on interior walls, especially on deformable supports and old tiling.Supports:- Old tiling. - Deformable supports (plasterboard). - Plaster plasters. - Painted surfaces.Technical Sheet: Descarga
- Glue mortar suitable for laying thick and medium / high porosity tiles and stoneware, both on floors and on interior cladding. Without plastering the support, without hanging and up to 30mm thick.Presentation: 25 Kg bags.Colors: Gray and White.Applications:- Interior coatings. - Indoor flooring.Supports:- Cement-based floors. · Walls plastered with sand mortar, cement and ceramic brick.Technical Sheet: https://www.es.weber/files/es/2018-07/FTC-ES-P-webercol-capa-gruesa.pdf.pdf
- Special adhesive for laying medium / high porosity tile and stoneware on supports plastered with plaster and plaster on interior walls.Presentation: 25 Kg bags.Colors: White.Applications:- Interior coatings of tiles and stoneware of medium / high porosity.Supports:- Traditional gypsum plaster, precast plaster and mortar boards and panels. - Suitable for anhydrite supports.Technical Sheet: Descarga
