Tienda

Inicio•Tienda
  •

    Webercal Flexible

    Estuco de cal coloreado en capa fina deformable, especialmente diseñado para el uso como revestimiento sobre sistemas de aislamiento térmico por el exterior webertherm. Presentación: Envases de 16 Kg. Colores: 12 colores disponibles (ver carta de colores). Ficha Técnica: DESCARGAR  Aplicaciones: Estuco mineral deformable en capa fina de altas prestaciones para la impermeabilización, decoración y protección duradera de:
    • Interiores y exteriores
    • Muros y techos.
    • Especialmente indicado como revestimiento de acabado de los sistemas weber.therm.
    • Para otras aplicaciones, consultar con el Departamento Técnico.
    Soportes:
    • Hormigón
    • Mortero de cemento
    • Mortero de cal
    • Pinturas
    • Cerámica
    • Yeso
    • Madera
    • Vidrio
    • Material sintético
    Detalles

  • Webercal Basic

    Mortero mineral de cal con conglomerantes hidráulicos, diseñado para el uso como base de enfoscado de todo tipo de soluciones bicapa y especialmente indicado para soluciones bicapa en base cal con revestimientos de acabado como revocos o estucos. Presentación: Sacos de 25 Kg. Colores: Gris y Blanco. Ficha Técnica: DESCARGAR
    • Mortero de cal para el enfoscado de fachadas en capa gruesa, tanto en obra nueva como en rehabilitación.
    • Constituye una buena base para todo tipo de soluciones bicapa y especialmente indicado para soluciones bicapa en base cal (revocos y estucos) en:
    • Exteriores e interiores,
    • Muros y techos.
    • Para otras aplicaciones, consultar con nuestro Departamento Técnico.
    Soportes:
    • Cerramientos de Ladrillo
    • Bloque de Termoarcilla
    • Bloque de Hormigón
    • Enfoscado de mortero tradicional tipo M-7, 5.
    Detalles

  • Webercal Revoco

    Mortero mineral de cal coloreado e hidrofugado para revocos, especialmente indicado para acabado liso o fratasado e ideal para reproducir las texturas más tradicionales de los revestimientos de cal: grabados, martillinas, sillerías, esgrafiados, etc. Presentación: Sacos de 25 Kg. Colores: 12 colores disponibles en 4 texturas (ver catálogo). Ficha Técnica: DESCARGAR Aplicaciones:
    • Mortero mineral de cal coloreado para revocar:
      • Tanto en obra nueva como rehabilitación
      • Interiores y exteriores.
      • Muros y techos.
    • Especialmente indicado para:
      • Obtener texturas lisas y fratasadas.
      • Reproducir texturas tradicionales de cal: gravados, martinillas, sillerías, esgrafiados.
    • Para otras aplicaciones, consultar con nuestro Departamento Técnico.
    Soportes:
    • Cerramientos de ladrillo.
    • Bloque de termoarcilla.
    • Bloque de hormigón y enfoscados de mortero tipo weber.cal basic.
    Detalles

  • Webercal Estuco

    Estuco de cal tradicional coloreado en capa fina indicado para la obtención de revestimientos con un alto nivel estético en soluciones bicapa. Presentación: Sacos de 25 Kg. Colores: 7 colores disponibles (ver catálogo). Ficha Técnica: DESCARGAR Aplicaciones:
    • Estuco a base de cal para el revestimiento y decoración con alto nivel estético, tanto en:
      • Tanto en obra nueva como rehabilitación
      • Interiores y exteriores.
      • Muros y techos.
    • Especialmente indicado para:
      • Obtener texturas lisas y fratasadas.
      • Reproducir texturas tradicionales de cal: gravados, martinillas, sillerías, esgrafiados.
    • Para otras aplicaciones, consultar con nuestro Departamento Técnico.
    Soportes:
    • Mortero de enfoscado webercal basic, webercal revoco y hormigón en exteriores; yeso y cartón-yeso en interiores.
    • Mortero regularizador webertherm base en los sistemas webertherm.
    Detalles

  • Weberdry Imper G

    Mortero mineral especialmente diseñado para la realización de enfoscados de regularización e impermeabilizantes en capa gruesa en superficies que requieran de un mayor espesor de aplicación, en suelos, muros o techos de construcciones enterradas como depósitos de agua, balsas, piscinas, sótanos, parkings, fosos de ascensor, túneles, cimentaciones, así como de muros de contención de hormigón. Presentación: Sacos de 25 Kg. Color: Gris Ficha Técnica: DESCARDAR Aplicaciones:
    1. Impermeabilización de construcciones enterradas tales como: depósitos, balsas, piscinas, sótanos, parkings, fosos de ascensor, túneles, cimentaciones, entre otros.
    2. En muros de contención de hormigón.
    3. En suelos, muros y techos.
    Soportes:
    1. Hormigón.
    2. Ladrillo
    3. Bloques de hormigón.
    4. Revocos (pañete) de mortero ricos en cemento.
    Detalles

  • Weberdry Imperflex

    Mortero flexible monocomponente para la impermeabilización en zonas sometidas a posibles pequeños movimientos y con riesgo de fisuración como terrazas, balcones, cubiertas y tejados, antes de la colocación de un revestimiento cerámico. Presentación: Bolsas de 15 Kg. Colores: Gris Mortero impermeabilizante flexible monocomponente para:
    1. Rehabilitación e impermeabilización de terrazas y balcones y en general, superficies de exterior expuestas a cambios térmicos importantes como voladizos de terrazas, azoteas y cornisas.
    2. Impermeabilización de depósitos de hormigón para agua potable.
    3. En baños, duchas y piscinas previa a la colocación de revestimientos cerámicos.
    4. En muros fisurados o que pueden ser sometidos a pequeños movimientos.
    Soportes:
    1. Hormigón liso.
    2. Elementos de hormigón prefabricados.
    3. Revocos (pañete) de mortero y cerámica.
    Ficha Técnica: DESCARGAR
    Detalles

  • Weberdry Imperflex

    One-component flexible mortar for waterproofing in areas subject to possible small movements and with risk of cracking such as terraces, balconies, roofs and roofs, before laying a ceramic coating. Presentation: 15 Kg bags. Colors: Gray Technical Sheet: https://www.es.weber/files/es/2020-01/FTC-ES-P-weberdry-imperflex.pdf Single-component flexible waterproofing mortar for: - Rehabilitation and waterproofing of terraces and balconies and in general, exterior surfaces exposed to significant thermal changes such as terrace overhangs, roofs and cornices. - Waterproofing of concrete tanks for drinking water. - In bathrooms, showers and swimming pools prior to laying ceramic tiles. - In cracked walls or that can be subjected to small movements. Supports: - Smooth concrete. - Precast concrete elements. - Mortar and ceramic plasters.
    Detalles

  • Weberdry Easy Roof

    Membrana impermeabilizante híbrida de poliuretano en base agua. Producto para impermeabilización de tejados, cubiertas, balcones y terrazas de forma duradera y sencilla. Máxima eficacia en la impermeabilización de zonas húmedas (bajo baldosa) en baños y cocinas, así como en la protección contra la humedad en construcciones de hormigón como puentes, túneles, etc. Presentación: Bidones de Plástico de 25Kg. Colores: Blanco, teja y gris. Ficha Técnica: DESCARGAR Aplicaciones:
    • Tejados, balcones, cubiertas y terrazas.
    • Zonas húmedas (bajo baldosa) en baños y cocinas.
    • En construcciones de hormigón como puentes, túneles, etc.
    Soportes:
    • Todo tipo de soportes, tales como cerámica, mortero, hormigón, tela asfáltica, soportes metálicos, entre otros.
    • Mortero de cal
    • Pinturas
    • Cerámica
    Detalles

  • Weberdry Easy Roof

    Hybrid waterproofing waterproofing polyurethane membrane. Product for waterproofing roofs, roofs, balconies and terraces in a durable and simple way. Maximum efficiency in waterproofing wet areas (under tile) in bathrooms and kitchens, as well as in protecting against moisture in concrete constructions such as bridges, tunnels, etc. Presentation: 25Kg Plastic Drums. Colors: White, tile and gray. Technical Sheet: https://www.es.weber/files/es/2019-05/FTC-ES-P-weberdry-easy-roof.pdf Applications: - Roofs, balconies, roofs and terraces. - Wet areas (under tile) in bathrooms and kitchens. - In concrete constructions such as bridges, tunnels, etc. Supports: - All kinds of supports, such as ceramics, mortar, concrete, asphalt cloth, metal supports, among others. - Lime mortar - Paints - Ceramics
    Detalles

  • Weberdry Fabric 65

    Geotextil técnico de poliéster para el refuerzo de membranas líquidas de impermeabilización en puntos singulares sensibles a la fisuración del impermeabilizante, como medias cañas, encuentros entre diferentes planos, desagües, chimeneas, tubos y sellado estanco de juntas estructurales y dilatación. Presentación: Rollo de 100M2 Ficha Técnica: DESCARGA Aplicaciones:
    • Tejido de refuerzo en combinación con las membranas líquidas de poliuretano weberdry.
    • Tratamiento de puntos singulares tales como medias cañas, desagües, chimeneas, tubos, etc.
    • Sellado estanco de juntas estructurales y de dilatación.
    Soportes:
    • En combinación con las membranas líquidas de poliuretano Weberdry.
    Detalles

  • Weberdry Fabric 65

    Technical polyester geotextile for the reinforcement of liquid waterproofing membranes in singular points sensitive to the cracking of the waterproofing, such as half-pipes, encounters between different planes, drains, chimneys, tubes and watertight sealing of structural joints and expansion. Presentation: Roll of 100M2 Technical Sheet: https://www.es.weber/files/es/2019-12/FTC_weberdry_fabric_65.pdf Applications: - Reinforcing fabric in combination with weberdry liquid polyurethane membranes. - Treatment of singular points such as half pipes, drains, chimneys, pipes, etc. - Watertight sealing of structural and expansion joints. Supports: - In combination with Weberdry liquid polyurethane membranes.
    Detalles

  • Webercol Dur

    High performance adhesive with mixed cement and resin binders, long open time and slip resistant, suitable for laying ceramic, marble, mosaics, glass paste, etc., on exterior and interior flooring and interior cladding. Suitable for placement in pools. Presentation: 25 Kg bags. Colors: Gray and White. Technical Sheet: https://www.es.weber/files/es/2018-11/FTC-ES-P-webercol-dur.pdf Applications: Interior cladding and interior and exterior paving, both in residential areas (kitchens, dining rooms, bathrooms) and urban areas. - Suitable for terraces, balconies and outdoor pavements in general subject to permanent humidity and frost. - Suitable for permanent immersion and wet environments such as swimming pools, baths, shower trays, saunas, spas, tanks, cold rooms, etc. Supports: - Cement-based screeds and self-leveling mortars. - Walls plastered with cement mortar and bastard mortar. - Laminated gypsum boards (gypsum board) waterproofed and non-waterproofed. Indoor fiber cement plates. -Rigid cementitious waterproofing (type weber.tec imper F or weber.tec imper G) and flexible (type weber.tec imperflex).
    Detalles

  • Webercol Flex³ Superapid

    One-component, fast-setting and highly deformable adhesive (C2FTES2) formulated with mixed cement-resin binders that allows the quick commissioning of the installed ceramic. Suitable for laying all kinds of ceramic tiles, marble, natural stone or the like of any absorption and format, and especially large format. Suitable for deformable supports or subject to movement or vibrations (wood, elastic waterproofing type webertec hydrolastic). Placements in interior and exterior pavements and coatings. Suitable for facades. Presentation: 25 Kg bags. Colors: Gray. Applications: • Interior and exterior coatings and pavements in residential, commercial, industrial and urban areas. • Indoor flooring and cladding in residential areas such as kitchens, dining rooms, bathrooms, ... • Indoor ceramic laying directly on pre-existing ceramic flooring or cladding in residential, commercial and industrial areas • Heavy traffic pavements and large surfaces where rapid commissioning is required. • Laying of radiant heating floors with pieces of any format and absorption, especially suitable for large formats. • Ceramic tiles placed on anhydrite screeds, after applying weberprim TP05, diluted 1: 5. • Industrial and commercial pavements subjected to intense traffic. • Ceramic installation on interior wooden walls and floors after application of weberprim FX15. • Suitable for terraces, balconies and outdoor pavements in general subject to permanent humidity and frost. • Suitable for permanent immersion and humid environments such as swimming pools, baths, shower trays, saunas, spas, tanks, cold rooms, etc. • Cladding on facades. • Laying of ceramic on elastic waterproofing (webertec hydrolastic type) with pieces of format up to 2,400 cm. Supports: • Cement-based screeds and self-leveling mortars. • Walls plastered with cement mortar and bastard mortar. • Concrete, precast concrete and foam concrete. • Plaster plasters, precast plaster and / or plaster panels. • Laminated plasterboard (plasterboard) waterproofed and non-waterproofed. • Fiber cement plates. • Pre-existing floor and wall tiles made of ceramic, terrazzo, natural stone, etc. • Anhydrite screeds • Radiant heating floors (cement-based or anhydrite). • Rigid cementitious waterproofing (type webertec imper F or webertec imper G) and flexible (type webertec imperflex). • Elastic waterproofing (webertec hydrolastic type). • Rigid cementitious waterproofing (type webertec imper F or webertec imper G) and flexible (type webertec imperflex). • Elastic waterproofing (webertec hydrolastic type). • Wooden supports after application of weberprim FX15 express. • Elastic waterproofing (webertec hydrolastic type) with pieces of format up to 2,400 cm. Technical Sheet: DESCARGAR
    Detalles

  • Webercol Flex³ Supergel

    Thixotropic adhesive reinforced with glass fibers and mixed cement and resin binders, flexible and highly defomable, with long open time and no slippage, for laying all kinds of ceramic tiles, of any absorption and especially of large format. Suitable for highly deformable supports (wood, elastic waterproofing type webertec hydrolastic). Placements on interior and exterior walls and pavements. Presentation: 25 Kg bags. Colors: White. Applications: - Interior cladding and interior and exterior paving in residential, commercial, industrial and urban areas. - Indoor flooring and cladding in residential areas such as kitchens, dining rooms, bathrooms, ... - Suitable for terraces, balconies and outdoor pavements in general subjected to permanent humidity and frost. - Suitable for permanent immersion and wet environments such as  swimming pools, baths, shower trays, saunas, spas, tanks, cold rooms, etc. - Industrial and commercial pavements subjected to intense traffic. - Laying ceramic directly on pre-existing ceramic coatings and pavements in residential, commercial and industrial areas. - Ceramic installation on interior wooden walls and floors after application of weberprim FX15 express. - Radiant heating floors with pieces of any format and absorption, especially suitable for large formats. - Cladding on facades at height, especially with a large format. Supports: - Self-leveling screeds and mortars on a cement basis. - Walls plastered with cement mortar and bastard mortar. - Concrete, precast concrete and foam concrete. - Plaster plasters, precast plaster and / or plaster panels. - Laminated gypsum boards (gypsum board) waterproofed and non waterproofed. - Fiber cement plates. - Large format ceramic brick. - Pre-existing pavements and coatings of ceramic, terrazzo, mosaics, natural stone, etc. - Anhydrite screeds (with or without radiant heating), after treating the -  substrate with weberprim TP05, diluted 1: 5. - Radiant heating floors (cement-based or anhydrite). - Rigid cementitious waterproofing (type webertec imper F or webertec imper G) and flexible (type webertec imperflex). -Elastic waterproofing (webertec hydrolastic type). -Wooden supports after application of weberprim FX15 express. - Elastic waterproofing (webertec hydrolastic type) with pieces of format up to 2,400 cm. Technical Sheet: DESCARGAR
    Detalles

  • Webercol Flex² Multirapid

    Rapid setting, extended open time and low take-off mixed mortar glue mortar that allows quick commissioning of the installed ceramic. Laying of facades and flooring for large surfaces, etc., with ceramic, marble, natural stone or the like, small or large, absorbent or non-absorbent. Outdoors and indoors. Presentation: 25 Kg bags. Colors: Gray and White. Applications: Heavy traffic pavements and large surfaces where rapid commissioning is required. - Laying ceramic directly on old ceramic. - Laying of radiant heating floors. - Laying ceramic on balconies and terraces. - Ceramic placement in anhydrite screeds, after application of weberprim TP05, diluted 1: 5. - Suitable in immersion. Supports: - Cement-based screeds and self-leveling mortars. - Walls plastered with cement mortar and bastard mortar. - Concrete. - Radiant heating floors. - Ancient pottery. Technical Sheet:  DESCARGAR
    Detalles

  • Webercol Flex² Multigel

    Thixotropic adhesive reinforced with glass fibers and mixed cement and resin binders, flexible and deformable, with long open time and no slip, for laying all kinds of ceramic tiles of any absorption. Placements on interior and exterior walls and pavements. Presentation: 25 Kg bags. Colors: Gray and White. Applications: - Suitable for laying all kinds of ceramic tiles of any degree of absorption such as porcelain stoneware, rustic stoneware, glass and ceramic mosaic, fired clay tiles, Catalan tile, tile, etc. - Suitable for laying natural stone (marble, granite, etc.) and artificial recomposed materials (terrazzo-type cement conglomerate). - Suitable for laying artificial recomposed materials (resin-based agglomerates) that are not subject to deformation. - Suitable for pieces reinforced with fiber mesh in pavement and interior wall of up to 70cm in length from the longest side of the tile. Supports: - Self-leveling screeds and mortars on a cement basis. - Walls plastered with cement mortar and bastard mortar. - Concrete, precast concrete and foam concrete. - Lime, plaster, precast plaster and / or plaster panels. - Laminated gypsum boards (gypsum board) waterproofed and non-waterproofed. - Fiber cement plates. - Large format ceramic brick. - Pre-existing pavements and coatings of ceramic, terrazzo, mosaics, natural stone, etc. - Anhydrite screeds (with or without underfloor heating), after treating the substrate with weberprim TP05, diluted 1: 5. - Radiant heating floors (cement-based or anhydrite). Rigid cementitious waterproofing (type webertec imper F or webertec imper G) and flexible (type webertec imperflex). - Wooden supports after application of weberprim FX15 express. -Elastic waterproofing (webertec hydrolastic type) with pieces of format up to 30x30cm. Technical Sheet: DESCARGAR
    Detalles

  • Webercol Flex² Multi

    Flexible and deformable adhesive with mixed cement and resin binders, long open time and slip resistant, for laying all kinds of ceramic tiles, of any format and absorption. Placements on interior and exterior walls and pavements. Presentation: 25 Kg bags. Colors: Gray and White. Applications: - High-rise façade cladding and intense traffic paving (not susceptible to stains due to water absorption). - For pieces of any format and absorption. - Demanding placements in interior and exterior flooring and cladding. Radiant heating floors. -Suitable for swimming pools (suitable for immense). Supports: Cementitious mortar, concrete, old ceramics, plaster, precast plaster, plasterboard and ahnidrite slabs. Technical Sheet: DESCARGAR
    Detalles

  • Webercol Flex Duorapid

    Rapid-setting mixed-bond glue mortar, which enables the quick installation of the installed ceramic. Thanks to its innovative technology, it allows rapid setting even at low temperatures. Laying on interior floors and walls and exterior floors with ceramic, porcelain stoneware, marble, natural stone or similar, of any format, absorbent or non-absorbent. Presentation: 25 Kg bags. Colors: Gray and White. Applications: - Heavy traffic pavements and large surfaces where rapid commissioning is required. - Placing ceramic directly on old ceramic. - Laying ceramic on balconies and terraces. - Suitable in immersion. Supports: Cement-based screeds and self-leveling mortars. - Walls plastered with cement mortar and bastard mortar. - Concrete. - Ancient pottery. Technical Sheet: Descarga
    Detalles

  • Webercol Flex Duogel

    Thixotropic adhesive reinforced with glass fibers and mixed cement and resin binders, flexible, with long open time and no slip, for laying all kinds of ceramic tiles and especially porcelain stoneware, of any format and absorption. Placements on walls, interior and exterior pavements. Presentation: 25 Kg bags. Colors: Gray and White. Applications: 1. Placement of pieces of any format and especially absorption of porcelain stoneware. 2. In exterior and interior pavements and interior cladding. 3. For Pools (suitable in immersion). 4. Façade cladding up to 3M high. 5. Radiant heating with small format pieces. Supports: 1. Concrete and cement-based floors. 2. Walls: glued with cementitious mortar, concrete, plaster, precast plasterboard and plasterboard. Technical Sheet: Descarga
    Detalles

  • Webercol Flex Duo

    Flexible adhesive with mixed cement and resin binders, long open time and slip resistant, for laying all kinds of ceramic tiles and especially porcelain stoneware, of any format and absorption. Placements on interior and exterior walls and pavements. Presentation: 25 Kg bags. Colors: Gray and White. Applications: 1. Placement of pieces of any format and absorption (not susceptible to stains by water absorption), especially porcelain stoneware. 2. In exterior and interior pavements and interior cladding. 3. Placement of porcelain stoneware in swimming pools, on plaster supports and in situations with high demands on use. Supports: 1. Concrete and cement-based floors. 2. Walls: glued with cementitious mortar, concrete, plaster, precast plasterboard and plasterboard. Technical Sheet: Descarga
    Detalles

  • Webercal Estuco

    Traditional lime stucco colored in a thin layer indicated for obtaining coatings with a high aesthetic level in two-layer solutions. Presentation: 25 Kg bags. Colors: 7 colors available (see catalog). Technical Sheet: https://www.es.weber/files/es/2019-07/FTC-ES-P-webercal-estuco.pdf Applications: - Lime-based stucco for coating and decoration with a high aesthetic level, both in: o Both in new construction and rehabilitation o Interiors and exteriors. o Walls and ceilings. - Especially indicated for: o Obtain smooth and textured textures. o Reproduce traditional lime textures: engravings, hammers, masonry, sgraffito. - For other applications, consult our Technical Department. Supports: - Webercal basic plastering mortar, webercal plaster and outdoor concrete; plaster and plasterboard indoors. - Webertherm standardizing mortar based on webertherm systems. - For other applications, consult the Technical Department
    Detalles

  • Webercal Basic

    Lime mineral mortar with hydraulic binders, designed for use as a plaster base for all types of bilayer solutions and especially suitable for lime based bilayer solutions with finish coatings such as plasters or stuccos. Presentation: 25 Kg bags. Colors: Gray and White. Technical Sheet: https://www.es.weber/files/es/2018-07/FTC-ES-P-webercal-basic.pdf.pdf Applications: - Lime mortar for plastering facades in thick layers, both in new construction and in renovation. - It constitutes a good base for all types of bilayer solutions and is especially suitable for bilayer solutions based on lime (plaster and stucco) in: - Exteriors and interiors, - Walls and ceilings. - For other applications, consult our Technical Department. Supports: - Brick Enclosures - Thermoclay Block - Concrete block - Traditional mortar plastering type M-7, 5.
    Detalles

  • Webercal Flexible

    Colored lime stucco in a deformable thin layer, specially designed for use as a coating on thermal insulation systems by the outside webertherm. Presentation: Containers of 16 Kg. Colors: 12 colors available (see color chart). Technical Sheet: https://www.es.weber/files/es/2020-01/FTC_ES_P-webercal-flexible.pdf Applications: High performance deformable thin layer mineral stucco for waterproofing, decoration and durable protection of: - Interior and exterior - Walls and ceilings.Especially suitable as a finishing coating for weber.therm systems. - For other applications, consult the Technical Department. Supports: - Concrete - Cement mortar - Lime mortar - Paintings - Ceramic -Cast - Wood -Glass - Synthetic material
    Detalles

  • Weberpral Arid

    Waterproof and breathable colored mineral mortar for cladding and decoration of facades, indicated to obtain a projected stone finish. Presentation: 25 Kg bags. Colors: 10 colors available (see color chart). Technical Sheet: https://www.es.weber/files/es/2018-07/FTC-ES-P-weberpral-arid.pdf.pdf Applications: - Interior and exterior. - On walls and ceilings. Supports: - Concrete. - Lime mortar. - Cement mortar. - Brick and Thermoclay. - Concrete block. - Lightened blocks.
    Detalles

  • Weber Flex P100

    Masilla adhesiva de poliuretano para el sellado de todo tipo de juntas y fisuras (juntas de dilatación, estructurales, de unión entre materiales, entre otros). Pegado elástico multiusos de materiales tales como mamparas, tabiques, placas de fibrocemento o melanina, tejas, maderas, cerámicas, zócalos, etc. Presentación: Salchichón de 600 ml y Cartuchos de 300 ml. Colores: Blanco, Gris, Marrón y Negro. Ficha Técnica: DESCARGAR Aplicaciones:
    1. Sellado de todo tipo de juntas y fisuras tales como juntas de dilatación, estructurales, de unión entre materiales, etc.
    2. Pegado elástico multiusos de materiales tales como mamparas, tabiques, placas de fibrocemento o melanina, tejas maderas, cerámicas, zócalos, etc.
    3. Sellado de juntas de elementos prefabricados de hormigón
    Soportes:
    • Alta adherencia sobre todo tipo de soportes.
    Detalles

  • Weber Foam PU32

    Espuma expansiva de poliuretano para el relleno y sellado de huecos o agujeros en muros y techos en contacto con el exterior y tratamiento de puentes térmicos, así como para el pegado puntual de tejas y placas de EPS. Presentación: Caja de 12 aerosoles de 750 ml de aplicación con pistola. Color: Amarillo Ficha Técnica: DESCARGAR Aplicaciones:
    1. Sellado de huecos, agujeros de muros y techos con el exterior y puentes térmicos.
    2. Montajes de puertas y ventanas.
    3. Aplicaciones de pantalla acústica y capa silenciadora.
    4. Optimización de aislamiento en refrigeración.
    5. Pegado puntual de tejas y placas de EPS.
    Soportes:
    • Alta adherencia sobre todo tipo de soportes, excepto PE y PP.
    Detalles

  • Weberglue MS55

    Adhesivo de polímeros rápido y muy elástico, para el pegado de todo tipo de elementos tales como espejos, buzones, zócalos parquet, etc. sobre todo tipo de soportes, tanto en interior como en exterior, y resistente a temperaturas de entre -40 ºC y +90 ºC. Presentación: Cajas de 12 cartuchos de 300 mL, palets de 120 cajas Colores: Blanco Ficha Técnica: DESCARGAR Aplicaciones:
    • Pegado rápido de todo tipo de materiales (excepto plásticos de polipropileno y productos bituminosos): espejos, buzones, zócalos parquet, etc… tanto en interior como en exterior.
    • Tanto en industria como construcción.
    Soportes: Hormigón, Mortero de cemento, Cerámica, Metal, Ladrillo, Madera, Vidrio, Sintético
    Detalles

  • Weber Latex C10

    Látex concentrado multiusos. Aditivo líquido para aumentar la adherencia y la flexibilidad, así como la dureza superficial de productos cementosos. Presentación:  Bidón de 10 kg - Palet de 400 kg (40 unidades) Ficha Técnica: DESCARGAR Aplicaciones:
    • Aditivación de morteros cola para aumentar su adherencia y flexibilidad en situaciones extremas.
    • Aditivación de morteros de rejuntado en reparaciones en capa fina.
    • Aditivación de morteros monocapa si se aplican sobre soportes débiles.
    • Aumentar la adherencia de lechadas de cemento.
    Soportes: Mortero de cemento, Mortero de cal.
    Detalles

  • Weber Latex C10

    Multipurpose concentrated latex. Liquid additive to increase adhesion and the flexibility, as well as the surface hardness of cementitious products. Presentation: 10 kg drum - 400 kg pallet (40 units) Data sheet: https://www.es.weber/files/es/2018-07/FTC-ES-P-weber-latex-c10.pdf.pdf Applications:
    • Additivation of glue mortars to increase their adherence and flexibility in extreme situations.
    • Additivation of grouting mortars in thin-layer repairs.
    • Additivation of monolayer mortars if applied on weak substrates.Increase the adherence of cement grouts.
    Supports: Cement mortar, Lime mortar.
    Detalles

  • Weberglue MS55

    Fast and highly elastic polymer adhesive, for gluing all kinds of elements such as mirrors, mailboxes, parquet baseboards, etc. on all types of supports, both indoors and in exterior, and resistant to temperatures between -40 ºC and +90 ºC. Presentation: Boxes of 12 cartridges of 300 mL, pallets of 120 boxes

    Colors: White

    Data sheet:

    https://www.es.weber/files/es/2018-07/FTC-ES-P-weber-glue-ms55.pdf.pdf Applications:
    • Fast bonding of all types of materials (except polypropylene plastics and bituminous products): mirrors, mailboxes, parquet baseboards, etc ... both indoors and outdoors.
    • Tanto en industria como construcción.
    Supports:

    Concrete, Cement Mortar, Ceramic, Metal, Brick, Wood, Glass, Synthetic

    Detalles

  • Weber Foam PU32

    Expansive polyurethane foam for filling and sealing gaps or holes in walls and ceilings in contact with the outside and treating thermal bridges, as well as for the specific gluing of EPS tiles and plates Presentation: Box of 12 sprays of 750 ml for spray application. Colour: Yellow Data sheet: https://www.es.weber/files/es/2018-07/FTC-ES-P-weber-foam-pu-32.pdf.pdf

    Applications:

    1. Sealing of gaps, holes in walls and ceilings with the exterior and thermal bridges.
    2. Door and window assemblies.
    3. Acoustic screen and silencer layer applications.
    4. Optimization of insulation in refrigeration.
    5. Spot gluing of EPS tiles and plates.
    Supports:
    • High adhesion on all types of substrates, except PE and PP.
    Detalles

  • Weber Flex P100

    Polyurethane adhesive putty for sealing all types of joints and fissures (expansion, structural, joint between materials, among others). Multi-purpose elastic bonding of materials such as partitions, partitions, fibrocement or melanin plates, tiles, wood, ceramics, baseboards, etc.

    Presentation: 600 ml Salchichón and 300 ml Cartridges. Colors: White, Gray, Brown and Black. Data sheet: https://www.es.weber/files/es/2018-07/FTC-ES-P-weber-flex-p100.pdf.pdf Applications:
    1. Sealing of all types of joints and fissures such as expansion joints, structural joints, joints between materials, etc.
    2. Multipurpose elastic bonding of materials such as partitions, partitions, fiber cement or melanin plates, wooden tiles, ceramics, baseboards, etc.
    3. Joint sealing of precast concrete elements
    Supports:
    • High adhesion on all types of supports.
    Detalles

  • Weberfloor Dur

    Mortero autonivelante polimérico industrial reforzado con fibras para espesores de 5 a 30 mm
    • Excelente resistencia a la flexotracción y a la abrasión.
    • Rápida puesta en servicio para suelos con tráfico pesado.
    • Retracción compensada y alta capacidad para el puenteo de fisuras.
    • Bombeable. Alta productividad..
    Ficha tecnica: DESCARGAR
    Detalles

  • Weberfloor Dur

    Fiber-reinforced industrial polymeric self-leveling mortar for thicknesses from 5 to 30 mm
    • Excellent resistance to flexotraction and abrasion.
    • Quick commissioning for heavily trafficked floors.
    • Compensated shrinkage and high crack-bridging capacity.
    • Pumpable. High productivity ..
    Data sheet: DESCARGAR
    Detalles

  • Weberfloor Light Estructural

    Mortero ligero de renovación para grandes recrecidos
    • 40% más ligero que un hormigón convencional
    • Alta resistencia mecánica (25 MPa)
    • Fácil y rápida ejecución
    • Espesores a partir de 30 mm
    • Apto para grandes espesores.
    Ficha tecnica: DESCARGAR
    Detalles

  • Weberfloor Rapid

    Mortero autonivelante rápido para espesores de 3 a 10 cm. Recrecido técnico polimérico autonivelante de altas prestaciones para el alisado y regularización de pavimentos interiores en capa gruesa de 3 a 10 cm de espesor. Gracias a su poder autonivelante permite obtener superficies con una alta planimetría para la colocación de pavimentos ligeros, cerámica y suelos técnicos cona una alta productividad al ser apto para ser bombeado. Permite una rápida puesta en servicio tanto para transitar como para revestir al ser de fraguado y secado rápido, además de minimizar la aparición de fisuras por retracción frente a un autonivelante convencional al ser de retracción compensada. Apto para calefacción radiante y como solera flotante. Ficha tecnica: DESCARGAR  
    Detalles

Título

UBICACIÓN

CONTACTOS

  • C/ Frank Felíx Miranda #29, Naco, República Dominicana.
  • +1 809.567.5542
  • [email protected]
Copyright 2019 - 2020 ADC Del Caribe | All Rights Reserved
Cerrar el área de la barra deslizante

ADC Del Caribe

ACD Del Caribe es un distribuidor especializado de sistemas, productos y aditivos para el sector de la construcción. Buscamos ser la sinergia perfecta entre fabricantes líderes a nivel mundial y los proyectos de nuestros clientes en toda la región del Caribe.

CONTACTOS

  • C/ Frank Felíx Miranda #29, Naco, República Dominicana.
  • +1 809.567.5667
  • [email protected]
Ir a Arriba