-
Flexible adhesive with mixed cement and resin binders, long open time and slip resistant, for laying all types of ceramic tiles and especially porcelain tiles, of any format and absorption. Placements on interior and exterior walls and floors. Presentation: 25 Kg bags. Colors: Gray and white. Applications: 1. Placement of pieces of any format and absorption (not susceptible to stains due to water absorption), especially porcelain stoneware. 2. On exterior and interior floors and interior cladding. 3. Laying porcelain stoneware in swimming pools, on plaster supports and in situations with high use demands. Supports: 1. Concrete and cement-based floors. 2. Walls: plastered with cementitious mortar, concrete, plaster, prefabricated plaster panels and plasterboard plates. Data sheet: TO DOWNLOAD -
Thixotropic adhesive reinforced with glass fibers and mixed cement and resin binders, flexible, with a long open time and zero slip, for laying all types of ceramic tiles and especially porcelain stoneware, of any format and absorption. Placements on walls, interior and exterior floors. Presentation: 25 Kg bags. Colors: Gray and white. Applications: 1. Placement of pieces of any format and absorption, especially porcelain stoneware. 2. On exterior and interior floors and interior cladding. 3. For Pools (suitable for immersion). 4. Cladding on facades up to 3M high. 5. Radiant heating with small-format pieces. Supports: 1. Concrete and cement-based floors. 2. Walls: plastered with cementitious mortar, concrete, plaster, prefabricated plaster panels and plasterboard. Data sheet: TO DOWNLOAD -
Rapid setting mixed bonding adhesive mortar, which allows the rapid commissioning of the laid ceramic. Thanks to its innovative technology, it allows rapid setting even at low temperatures. Installation on interior floors and walls and exterior floors with ceramic, porcelain stoneware, marble, natural stone or similar, of any format, absorbent or non-absorbent. Presentation: 25 Kg bags. Colors: Gray and white. Applications:- Pavements with heavy traffic and large surfaces where quick commissioning is required.
- Laying ceramic directly on old ceramic.
- Ceramic tile placement on balconies and terraces.
- Suitable for immersion.
- Cement-based screeds and self-leveling mortars.
- Walls plastered with cement mortar and bastard mortar.
- Concrete.
- Ancient pottery.
-
Flexible and deformable adhesive with mixed cement and resin binders, long open time and slip resistant, for laying all types of ceramic tiles, of any format and absorption. Placements on interior and exterior walls and floors. Presentation: 25 Kg bags. Colors: Gray and white. Applications:- Cladding of facades in height and pavement of intense traffic (not susceptible to stains due to water absorption).
- For pieces of any shape and absorption.
- Demanding interior and exterior flooring and cladding applications.
- Radiant heating floors.
- Suitable for swimming pools (suitable for immersion).
-
Thixotropic adhesive reinforced with glass fibers and mixed cement and resin binders, flexible and deformable, with a long open time and zero slip, for laying all types of ceramic tiles of any absorption. Placements on interior and exterior walls and floors. Presentation: 25 Kg bags. Colors: Gray and white. Applications:- Suitable for laying all types of ceramic tiles of any degree of absorption such as porcelain stoneware, rustic stoneware, vitreous and ceramic mosaic, fired earth tiles, Catalan tile, tile, etc.
- Suitable for laying natural stone (marble, granite, etc.) and artificial composite materials (terrazzo-type cement conglomerate).
- Suitable for laying artificial composite materials (resin-based agglomerates) that are not subject to deformation.
- Suitable for pieces reinforced with fiber mesh in pavement and interior wall up to 70cm in length on the longest side of the tile.
- Cement-based self-leveling screeds and mortars.
- Walls plastered with cement mortar and bastard mortar.
- Concrete, precast concrete and aerated concrete.
- Lime plasters, plaster, prefabricated gypsum and / or plaster panels.
- Sheets of laminated plaster (plasterboard) waterproofed and not waterproofed.
- Fiber cement plates.
- Large format ceramic brick.
- Pre-existing floors and coverings of ceramic, terrazzo, mosaics, natural stone, etc.
- Anhydrite screeds (with or without radiant heating), after treating the substrate with weberprim TP05, diluted 1: 5.
- Radiant heating floors (cement or anhydrite base).
- Rigid cementitious waterproofing (type webertec imper F or webertec imper G) and flexible (type webertec imperflex).
- Wooden supports after application of weberprim FX15 express.
- Elastic waterproofing (type webertec hydrolastic) with pieces of format up to 30x30cm.
-
Rapid setting mixed bonding adhesive mortar, extended open time and reduced sag that allows quick commissioning of the laid ceramic. Laying of facades and pavements of large surfaces, etc., with ceramic, marble, natural stone or similar, small or large format, absorbent or non-absorbent. Outdoors and indoors. Presentation: 25 Kg bags. Colors: Gray and white. Applications:- Pavements with heavy traffic and large surfaces where quick commissioning is required.
- Placing ceramic directly on old ceramic.
- Laying of radiant heating pavements.
- Ceramic tile placement on balconies and terraces.
- Placement of ceramic in anhydrite screeds, previous application of weberprim TP05, diluted 1: 5.
- Suitable for immersion.
- Cement-based screeds and self-leveling mortars.
- Walls plastered with cement mortar and bastard mortar.
- Concrete.
- Radiant heating floors.
- Ancient pottery.
-
Thixotropic adhesive reinforced with glass fibers and mixed cement and resin binders, flexible and highly defomable, with a long open time and zero slip, for laying all types of ceramic tiles, of any absorption and especially large-format. Suitable for very deformable substrates (wood, elastic waterproofing type webertec hydrolastic). Placements on interior and exterior walls and floors. Presentation: 25 Kg bags. Colors: White. Applications:- Interior coatings and interior and exterior flooring in residential, commercial, industrial and urban areas.
- Indoor flooring and cladding in residential areas such as kitchens, dining rooms, bathrooms, ...
- Suitable for terraces, balconies and outdoor pavements in general subjected to permanent humidity and frost.
- Suitable for permanent immersion and humid environments such as swimming pools, bathrooms, shower trays, saunas, spas, tanks, cold rooms, etc.
- Industrial and commercial flooring subjected to heavy traffic.
- Laying ceramic directly on existing ceramic tiles and flooring in residential, commercial and industrial areas.
- Placement of ceramic on interior walls and wooden floors after applying weberprim FX15 express.
- Radiant heating floors with pieces of any format and absorption, especially suitable for large formats.
- Cladding on high-rise facades, especially with large formats.
- Cement-based self-leveling screeds and mortars.
- Walls plastered with cement mortar and bastard mortar.
- Concrete, precast concrete and aerated concrete.
- Gypsum plasters, prefabricated gypsum and / or plaster panels.
- Sheets of laminated plaster (plasterboard) waterproofed and not waterproofed.
- Fiber cement plates.
- Large format ceramic brick.
- Pre-existing floors and coverings of ceramic, terrazzo, mosaics, natural stone, etc.
- Anhydrite screeds (with or without radiant heating), after treating the substrate with weberprim TP05, diluted 1: 5.
- Radiant heating floors (cement or anhydrite base).
- Rigid cementitious waterproofing (type webertec imper F or webertec imper G) and flexible (type webertec imperflex).
- Elastic waterproofing (type webertec hydrolastic).
- Wooden supports after application of weberprim FX15 express.
- Elastic waterproofing (type webertec hydrolastic) with pieces of format up to 2,400 cm.
-
One-component, fast-setting and highly deformable adhesive (C2FTES2) formulated with mixed cement-resin binders that allows the rapid commissioning of the placed ceramic. Suitable for laying all types of ceramic, marble, natural stone or similar tiles of any absorption and format, especially large ones. Suitable for supports that are deformable or subject to movements or vibrations (wood, webertec hydrolastic type elastic waterproofing). Placements on interior and exterior flooring and cladding. Suitable for facades. Presentation: 25 Kg bags. Colors: Gray. Applications: • Interior and exterior coatings and flooring in residential, commercial, industrial and urban areas. • Indoor flooring and cladding in residential areas such as kitchens, dining rooms, bathrooms, ... • Indoor ceramic tile laying directly on existing ceramic flooring or cladding in residential, commercial and industrial areas • High traffic flooring and large surfaces where it is need quick commissioning. • Laying radiant heating floors with pieces of any format and absorption, especially suitable for large formats. • Placement of ceramic in anhydrite screeds, after applying weberprim TP05, diluted 1: 5. • Industrial and commercial flooring subjected to heavy traffic. • Placement of ceramic on interior wooden walls and floors after applying weberprim FX15. • Suitable for terraces, balconies and outdoor pavements in general subjected to permanent humidity and frost. • Suitable for permanent immersion and humid environments such as swimming pools, bathrooms, shower trays, saunas, spas, tanks, cold rooms, etc. • Coatings on facades. • Laying of ceramic on elastic waterproofing (webertec hydrolastic type) with pieces of format up to 2,400 cm. Supports: • Cement-based screeds and self-leveling mortars. • Walls plastered with cement mortar and bastard mortar. • Concrete, precast concrete and aerated concrete. • Gypsum plasters, prefabricated gypsum and / or plaster panels. • Waterproof and non-waterproofed laminated plasterboard (plasterboard). • Fiber cement plates. • Pre-existing ceramic, terrazzo, natural stone flooring and wall tiles, etc. • Anhydrite floors • Radiant heating floors (cement or anhydrite base). • Rigid cementitious waterproofing (type webertec imper F or webertec imper G) and flexible (type webertec imperflex). • Elastic waterproofing (webertec hydrolastic type). • Rigid cementitious waterproofing (type webertec imper F or webertec imper G) and flexible (type webertec imperflex). • Elastic waterproofing (webertec hydrolastic type). • Wooden substrates after applying weberprim FX15 express. • Elastic waterproofing (webertec hydrolastic type) with pieces of format up to 2,400 cm. Data sheet: TO DOWNLOAD -
High-performance adhesive with mixed cement and resin binders, long open time and slip resistant, suitable for laying ceramic, marble, mosaics, glass paste, etc., on exterior and interior floors and interior wall tiles. Suitable for placement in swimming pools.
Presentation: 25 Kg bags.
Colors: Gray and white.
Data sheet: TO DOWNLOAD
Applications:
Interior coatings and interior and exterior flooring, both in residential areas (kitchens, dining rooms, bathrooms) and urban areas.
- Suitable for terraces, balconies and outdoor pavements in general subjected to permanent humidity and frost.
- Suitable for permanent immersion and humid environments such as swimming pools, bathrooms, shower trays, saunas, spas, tanks, cold rooms, etc.
Supports:
- Cement-based screeds and self-leveling mortars.
- Walls plastered with cement mortar and bastard mortar.
- Sheets of laminated plaster (plasterboard) waterproofed and not waterproofed.
- Fiber cement boards indoors.
- Rigid cementitious waterproofing (type weber.tec imper F or weber.tec imper G) and flexible (type weber.tec imperflex).
-
Special adhesive for laying medium / high porosity tiles and stoneware on plaster and plaster plastered substrates on interior walls. Presentation: 25 Kg bags. Colors: White. Applications:- Interior coverings of tiles and stoneware of medium / high porosity.
- Traditional gypsum plaster, prefabricated plaster and mortar plates and panels.
- Suitable for anhydrite supports.
-
Adhesive mortar suitable for thick layer laying of medium / high porosity tiles and stoneware, both on floors and interior cladding. Without plastering the support, without sagging and up to 30mm thick. Presentation: 25 Kg bags. Colors: Gray and white. Applications:- Interior coatings.
- Indoor flooring.
- Cement-based floors. · Walls plastered with sand mortar, cement and ceramic brick.
-
Adhesive paste for laying ceramic tiles on interior walls, especially on deformable substrates such as plasterboard and on old tiles. Presentation: 25 Kg bucket. Colors: White bone. Applications: • Ceramic coatings on interior walls, especially on deformable supports and old tiles. Supports: • Old tiling. • Deformable supports (plasterboard). • Plaster plasters. • Painted surfaces. Data sheet: TO DOWNLOAD -
Highly flexible and adherent polyurethane-epoxy-based adhesive paste for laying all types of ceramic tiles of any format and absorption on interior and exterior walls and floors. Especially suitable for supports subjected to strong vibrations or deformations such as wood, metal and synthetic materials such as vinyl, among others. Presentation: 10 Kg pre-dosed bucket (Component A and B). Colors: White. Applications: • Interior coatings and interior and exterior flooring in residential, commercial, industrial and urban areas. • Indoor flooring and cladding in residential areas such as kitchens, dining rooms, bathrooms. • Suitable for terraces, balconies and outdoor pavements in general subjected to humidity and permanent frost. • Coatings on facades. • Laying ceramic on elastic waterproofing (webertec hydrolastic type). • Placements on metal supports. • Laying of synthetic materials not compatible with cementitious mortars. • Suitable for humid environments such as bathrooms, shower trays, saunas, spas, tanks, cold rooms, etc. • High demand industrial and commercial flooring subjected to heavy traffic and / or constant vibrations. Supports: • Cement-based screeds and self-leveling mortars. • Walls plastered with cement mortar and bastard mortar. • Concrete, precast concrete and aerated concrete. • Fiber cement plates. • Pre-existing ceramic, terrazzo, natural stone flooring and wall tiles, etc. • Gypsum plasters, prefabricated gypsum and / or plaster panels. • Waterproof and non-waterproofed laminated plasterboard (plasterboard). • Anhydrite soleras. • Rigid cementitious waterproofing and over elastic waterproofing • Polyurethane or epoxy flooring. • Supports subject to movements or vibrations such as wood, parquet flooring, chipboard panels. • Old PVC, linoleum and rigid vinyl flooring. • Polyester, metal and paint supports in good condition. Data sheet: TO DOWNLOAD -
High-fine mortar with an extra-smooth finish to fill joints between tiles up to 3 mm wide. Suitable for tiles of any type and absorption. For floors and walls for interior use. Presentation: 5 Kg plastic bag. Colors: 17 colors available (See catalog). Applications:- Grouting of parts indoors.
- Grouting of residential flooring and cladding areas such as kitchens, dining rooms and bathrooms.
- Grouting of all types of ceramic tiles of any format and degree of absorption such as porcelain stoneware, rustic stoneware, glazed stoneware, vitreous and ceramic mosaic, fired earth tiles, Catalan tile, tile, etc.
- Grouting of all types of natural stone (marble, granite, ...) or artificial composite materials (terrazzo-type cement conglomerate or resin-based agglomerates) that are not subject to deformation.
-
Mortar for the realization of waterproof joints from 3 to 15 mm wide in ceramic tile coverings of any type and absorption, especially recommended for grouting in exposed outdoor floors and subject to deformations due to sudden changes in temperature, such as terraces, patios, balconies , etc. Presentation: 25 Kg bags. Colors: 13 colors available (See catalog). Applications: • Grouting indoor and outdoor flooring and cladding. Supports: • Grouting of residential areas of floors and walls such as kitchens, dining rooms and bathrooms. • Grouting of all types of ceramic tiles of any format and degree of absorption such as porcelain stoneware, rustic stoneware, glazed stoneware, vitreous and ceramic mosaic, fired earth tiles, Catalan tile, tile, etc. • Grouting of all types of natural stone (marble, granite, ...) or artificial composite materials (terrazzo-type cement conglomerate or resin-based agglomerates) that are not subject to deformation. Data sheet: TO DOWNLOAD -
High resistance mortar for making joints up to 15 mm wide in tiles of any format and absorption indoors and outdoors, and especially recommended for swimming pools, collective bathrooms, terraces and facades. Presentation: 5 Kg Plastic Bag. Colors: 24 colors available. Applications:- Grouting indoor and outdoor floor and wall tiles.
- Grouting of residential flooring and cladding areas such as kitchens, dining rooms and bathrooms.
- Grouting of all types of ceramic tiles of any format and degree of absorption such as porcelain stoneware, rustic stoneware, glazed stoneware, vitreous and ceramic mosaic, fired earth tiles, Catalan tile, tile, etc.
- Grouting of all types of natural stone (marble, granite, ...) or artificial composite materials (terrazzo-type cement conglomerate or resin-based agglomerates) that are not subject to deformation.
- Realization of joints resistant to chemical products.
- Repair of degraded joints.
-
Deformable mortar for making 3-30 mm wide joints in demanding situations with tiles of any format and absorption in both interior and exterior flooring and cladding, and especially recommended for grouting on facades. Presentation: 15 Kg bag. Colors: 6 colors available (See catalog). Applications:- Grouting indoor and outdoor floor and wall tiles.
- Grouting of residential areas of floors and walls such as kitchens, dining rooms, bathrooms, underfloor heating floors, facades, terraces and balconies.
- Suitable for grouting pieces with a wide joint (up to 30mm) such as paves, natural stone, among others.
- Grouting of all types of natural stone (marble, granite, ...) or artificial composite materials (terrazzo-type cement conglomerate or resin-based agglomerates) that are not subject to deformation.
-
High resistance epoxy mortar, very easy to apply and clean, specially designed for making watertight joints from 2 to 15 mm wide between tiles, as well as for the adhesion of ceramic pieces of any format and absorption, in areas that require a high resistance to chemical agents, both indoors and outdoors. Presentation: Plastic jar of 5 Kg and 2.5Kg with components A + B that must be mixed. Colors: Range of 10 colors with the possibility of gold and silver metallic finishes available. Applications:- Grouting indoor and outdoor floor and wall tiles.
- For laying ceramics and making joints between 3-10mm pieces in swimming pools, chemical and food industries, laboratories, hospitals, workshops, etc.
- Suitable for immersion.
- Realization of joints resistant to chemical products.
- Suitable for floors subject to heavy traffic.
-
Waterproof and breathable colored mineral mortar for cladding and decoration of facades, indicated to obtain a projected stone finish. Presentation: 25 Kg bags. Colors: 10 colors available (see color chart). Data sheet: TO DOWNLOAD Applications: 1. Interior and exterior. 2. On walls and ceilings. Supports: 1. Concrete. 2. Lime mortar. 3. Cement mortar. 4. Brick and Thermoclay. 5. Concrete block. 6. Lightened blocks. -
Waterproof and breathable colored mineral mortar for cladding and decoration of facades, indicated to obtain a scratched or rustic finish. Presentation: 25 Kg bags. Colors: 24 chart colors and special colors available (see color chart). Data sheet: TO DOWNLOAD Applications: 1. Interior and exterior. 2. On walls and ceilings. 3. New construction and Rehabilitation Supports: 1. Concrete. 2. Brick and Thermoclay. 3. Concrete block. 4. Lightened blocks. -
Traditional colored lime stucco in a thin layer indicated for obtaining coatings with a high aesthetic level in two-layer solutions. Presentation: 25 Kg bags. Colors: 7 colors available (see catalog). Data sheet: TO DOWNLOAD Applications: • Lime-based stucco for cladding and decoration with a high aesthetic level, both in: o Both in new construction and renovation o Interior and exterior. o Walls and ceilings. • Especially suitable for: o Obtain smooth and floated textures. o Reproduce traditional lime textures: engravings, hammers, chairs, sgraffito. • For other applications, consult our Technical Department. Supports: • Webercal basic rendering mortar, webercal rendering and exterior concrete; plaster and plasterboard indoors. • Webertherm base regularizing mortar in webertherm systems. Category: Webercol Label: Lime Stucco and Thinset -
Colored lime plaster in a thin layer for smooth finishes for the decoration of interiors, exteriors, facades and ceilings. Presentation: 25 Kg bags. Colors: 8 colors available (see catalog). Data sheet: TO DOWNLOAD Applications: • Exteriors and interiors, • Facades and Ceilings • For other applications, consult our Technical Department. Supports: Smooth Webercal should always be applied over a previous base such as: • Lime Mortar • Webercal Revoco • Waterproofing Plaster Mortars • Webercal Basic and Weberevhidro. • In renovations on regular, absorbent and resistant traditional plasters. • For other applications, consult our Technical Department. -
Highly breathable mortar for the restoration of walls affected by humidity and efflorescence. Both in new construction for preventive treatment of future damp due to capillary rise and in rehabilitation for immediate sanitation of areas affected by capillary rise damp. Presentation: 25 Kg bags. Colors: White. Data sheet: TO DOWNLOAD Applications: • Mortar for the sanitation of walls affected by capillary rise damp and efflorescence. o In new construction as a preventive treatment of future damp due to capillary rise. o Whenever effective, quick and easy sanitation is needed. Supports: • Ceramic brick (hollow and solid). • Natural stone. • Concrete block. • Reinforced concrete. -
Traditional colored lime stucco in a thin layer indicated for obtaining coatings with a high aesthetic level in two-layer solutions. Presentation: 25 Kg bags. Colors: 7 colors available (see catalog). Technical Sheet: https://www.es.weber/files/es/2019-07/FTC-ES-P-webercal-fino.pdf Applications: • Lime-based stucco for cladding and decoration with a high aesthetic level, both in: o Both in new construction and rehabilitation o Interiors and exteriors. or Walls and ceilings. • Especially suitable for: o Obtain smooth and floated textures. o Reproduces traditional lime textures: engravings, hammers, chairs, sgraffito. • For other applications, consult our Technical Department. Supports: • Webercal basic rendering mortar, webercal rendering and exterior concrete; plaster and plasterboard indoors. • Webertherm base regularizing mortar in webertherm systems. Category: Webercol Tag: Lime Stucco and Mortars
-
Colored lime stucco in a thin deformable layer, specially designed for use as a coating on external thermal insulation systems webertherm. Presentation: 16 Kg containers. Colors: 12 colors available (see color chart). Data sheet: TO DOWNLOAD Applications: High performance thin-film deformable mineral stucco for waterproofing, decoration and lasting protection of:- Interior and exterior
- Walls and ceilings.
- Especially suitable as a finishing coating for weber.therm systems.
- For other applications, consult the Technical Department.
- Concrete
- Cement mortar
- Lime mortar
- Paints
- Ceramics
- Cast
- Wood
- Glass
- Synthetic material
-
Lime mineral mortar with hydraulic binders, designed for use as a plaster base for all types of two-layer solutions and especially suitable for lime-based two-layer solutions with finish coatings such as render or stucco. Presentation: 25 Kg bags. Colors: Gray and white. Data sheet: TO DOWNLOAD- Lime mortar for thick layer rendering of facades, both in new construction and in rehabilitation.
- It constitutes a good base for all types of two-layer solutions and is especially suitable for lime-based two-layer solutions (plasters and stucco) in:
- Exteriors and interiors,
- Walls and ceilings.
- For other applications, consult our Technical Department.
- Brick Enclosures
- Thermoclay Block
- Concrete block
- Traditional mortar plastering type M-7, 5.
-
Lime colored and waterproofed mineral mortar for plasters, especially indicated for smooth or floated finishes and ideal for reproducing the more traditional textures of lime coatings: engravings, hammers, chairs, sgraffito, etc. Presentation: 25 Kg bags. Colors: 12 colors available in 4 textures (see catalog). Data sheet: TO DOWNLOAD Applications:- Colored lime mineral mortar for plastering:
- Both in new construction and rehabilitation
- Interior and exterior.
- Walls and ceilings.
- Especially suitable for:
- Obtain smooth and floated textures.
- Reproduce traditional lime textures: engravings, martinillas, chairs, sgraffito.
- For other applications, consult our Technical Department.
- Brick walls.
- Thermoclay block.
- Concrete block and mortar plasters type weber.cal basic.
- Colored lime mineral mortar for plastering:
-
Traditional colored lime stucco in a thin layer indicated for obtaining coatings with a high aesthetic level in two-layer solutions. Presentation: 25 Kg bags. Colors: 7 colors available (see catalog). Data sheet: TO DOWNLOAD Applications:- Lime-based stucco for cladding and decoration with a high aesthetic level, both in:
- Both in new construction and rehabilitation
- Interior and exterior.
- Walls and ceilings.
- Especially suitable for:
- Obtain smooth and floated textures.
- Reproduce traditional lime textures: engravings, martinillas, chairs, sgraffito.
- For other applications, consult our Technical Department.
- Plastering mortar webercal basic, webercal plaster and concrete outdoors; plaster and plasterboard indoors.
- Regularizing mortar webertherm base in the webertherm systems.
- Lime-based stucco for cladding and decoration with a high aesthetic level, both in:
-
Mineral mortar specially designed for the realization of regularization and waterproofing plasters in thick layers on surfaces that require a greater application thickness, on floors, walls or ceilings of buried constructions such as water tanks, ponds, swimming pools, basements, parking lots, pits. elevator, tunnels, foundations, as well as concrete retaining walls. Presentation: 25 Kg bags. Colour: Gray Data sheet: Unload Applications:- Waterproofing of buried constructions such as: tanks, ponds, swimming pools, basements, parking lots, elevator shafts, tunnels, foundations, among others.
- In concrete retaining walls.
- On floors, walls and ceilings.
- Concrete.
- Brick
- Concrete blocks.
- Cement-rich mortar plasters (pañete).
-
One-component flexible mortar for waterproofing in areas subject to possible small movements and with risk of cracking such as terraces, balconies, roofs and roofs, before laying a ceramic coating. Presentation: 15 Kg bags. Colors: Gray One-component flexible waterproofing mortar for:- Rehabilitation and waterproofing of terraces and balconies and in general, outdoor surfaces exposed to significant thermal changes such as cantilevers for terraces, roofs and cornices.
- Waterproofing of concrete tanks for drinking water.
- In bathrooms, showers and swimming pools prior to the placement of ceramic tiles.
- In cracked walls or that can be subjected to small movements.
- Smooth concrete.
- Precast concrete elements.
- Plasters (pañete) of mortar and ceramic.
-
One-component flexible mortar for waterproofing in areas subject to possible small movements and with risk of cracking such as terraces, balconies, roofs and roofs, before laying a ceramic coating. Presentation: 15 Kg bags. Colors: Gray Technical Sheet: https://www.es.weber/files/es/2020-01/FTC-ES-P-weberdry-imperflex.pdf Single-component flexible waterproofing mortar for: - Rehabilitation and waterproofing of terraces and balconies and in general, exterior surfaces exposed to significant thermal changes such as terrace overhangs, roofs and cornices. - Waterproofing of concrete tanks for drinking water. - In bathrooms, showers and swimming pools prior to laying ceramic tiles. - In cracked walls or that can be subjected to small movements. Supports: -Smooth concrete. - Precast concrete elements. - Mortar and ceramic plasters.
-
Hybrid water-based polyurethane waterproofing membrane. Product for waterproofing roofs, decks, balconies and terraces in a durable and simple way. Maximum efficiency in waterproofing wet areas (under tile) in bathrooms and kitchens, as well as in protecting against moisture in concrete constructions such as bridges, tunnels, etc. Presentation: 25Kg Plastic Drums. Colors: White, tile and gray. Data sheet: TO DOWNLOAD Applications:- Roofs, balconies, decks and terraces.
- Wet areas (under tile) in bathrooms and kitchens.
- In concrete constructions such as bridges, tunnels, etc.
- All types of supports, such as ceramic, mortar, concrete, asphalt fabric, metal supports, among others.
- Lime mortar
- Paints
- Ceramics
-
Hybrid waterproofing waterproofing polyurethane membrane. Product for waterproofing roofs, roofs, balconies and terraces in a durable and simple way. Maximum efficiency in waterproofing wet areas (under tile) in bathrooms and kitchens, as well as in protecting against moisture in concrete constructions such as bridges, tunnels, etc. Presentation: 25Kg Plastic Drums. Colors: White, tile and gray. Technical Sheet: https://www.es.weber/files/es/2019-05/FTC-ES-P-weberdry-easy-roof.pdf Applications: - Roofs, balconies, roofs and terraces. - Wet areas (under tile) in bathrooms and kitchens. - In concrete constructions such as bridges, tunnels, etc. Supports: - All kinds of supports, such as ceramics, mortar, concrete, asphalt cloth, metal supports, among others. - Lime mortar - Paints - Ceramics
-
Polyester technical geotextile for the reinforcement of liquid waterproofing membranes in singular points sensitive to the waterproofing cracking, such as half shells, encounters between different planes, drains, chimneys, pipes and watertight sealing of structural joints and expansion. Presentation: 100M2 roll Data sheet: DOWNLOAD Applications:- Reinforcing fabric in combination with liquid polyurethane membranes weberdry.
- Treatment of singular points such as half reeds, drains, chimneys, pipes, etc.
- Watertight sealing of structural and expansion joints.
- In combination with liquid polyurethane membranes Weberdry.
-
Technical polyester geotextile for the reinforcement of liquid waterproofing membranes in singular points sensitive to the cracking of the waterproofing, such as half-pipes, encounters between different planes, drains, chimneys, tubes and watertight sealing of structural joints and expansion. Presentation: Roll of 100M2 Technical Sheet: https://www.es.weber/files/es/2019-12/FTC_weberdry_fabric_65.pdf Applications: - Reinforcing fabric in combination with weberdry liquid polyurethane membranes. - Treatment of singular points such as half pipes, drains, chimneys, pipes, etc. - Watertight sealing of structural and expansion joints. Supports: - In combination with Weberdry liquid polyurethane membranes.
-
High performance adhesive with mixed cement and resin binders, long open time and slip resistant, suitable for laying ceramic, marble, mosaics, glass paste, etc., on exterior and interior flooring and interior cladding. Suitable for placement in pools. Presentation: 25 Kg bags. Colors: Gray and White. Technical Sheet: https://www.es.weber/files/es/2018-11/FTC-ES-P-webercol-dur.pdf Applications: Interior cladding and interior and exterior paving, both in residential areas (kitchens, dining rooms, bathrooms) and urban areas. - Suitable for terraces, balconies and outdoor pavements in general subject to permanent humidity and frost. - Suitable for permanent immersion and wet environments such as swimming pools, baths, shower trays, saunas, spas, tanks, cold rooms, etc. Supports: - Cement-based screeds and self-leveling mortars. - Walls plastered with cement mortar and bastard mortar. - Laminated gypsum boards (gypsum board) waterproofed and non-waterproofed. Indoor fiber cement plates. -Rigid cementitious waterproofing (type weber.tec imper F or weber.tec imper G) and flexible (type weber.tec imperflex).
